[v4 08/11] RISC-V: Add interrupt support for perf
Atish Patra
atish.patra at wdc.com
Mon Oct 25 12:53:47 PDT 2021
The Sscof extension allows counter overflow and filtering for programmable
counters. Enable the perf driver to handle the overflow interrupt.
Even though the perf overflow interrupt is a local one, it is parsed from
DT for simplification. Thus, the DT node with interrupt-extended property
is mandatory for any platform that wants event sampling.
Signed-off-by: Atish Patra <atish.patra at wdc.com>
---
arch/riscv/include/asm/csr.h | 8 +-
drivers/perf/riscv_pmu_sbi.c | 209 ++++++++++++++++++++++++++++++---
include/linux/perf/riscv_pmu.h | 4 +-
3 files changed, 204 insertions(+), 17 deletions(-)
diff --git a/arch/riscv/include/asm/csr.h b/arch/riscv/include/asm/csr.h
index e4d369830af4..8518eb0014bc 100644
--- a/arch/riscv/include/asm/csr.h
+++ b/arch/riscv/include/asm/csr.h
@@ -63,6 +63,7 @@
#define IRQ_M_TIMER 7
#define IRQ_S_EXT 9
#define IRQ_M_EXT 11
+#define IRQ_PMU_OVF 13
/* Exception causes */
#define EXC_INST_MISALIGNED 0
@@ -151,6 +152,8 @@
#define CSR_HPMCOUNTER30H 0xc9e
#define CSR_HPMCOUNTER31H 0xc9f
+#define CSR_SSCOUNTOVF 0xda0
+
#define CSR_SSTATUS 0x100
#define CSR_SIE 0x104
#define CSR_STVEC 0x105
@@ -212,7 +215,10 @@
# define RV_IRQ_SOFT IRQ_S_SOFT
# define RV_IRQ_TIMER IRQ_S_TIMER
# define RV_IRQ_EXT IRQ_S_EXT
-#endif /* CONFIG_RISCV_M_MODE */
+# define RV_IRQ_PMU IRQ_PMU_OVF
+# define SIP_LCOFIP (_AC(0x1, UL) << IRQ_PMU_OVF)
+
+#endif /* !CONFIG_RISCV_M_MODE */
/* IE/IP (Supervisor/Machine Interrupt Enable/Pending) flags */
#define IE_SIE (_AC(0x1, UL) << RV_IRQ_SOFT)
diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
index 7a274aeff51e..46380ac22e08 100644
--- a/drivers/perf/riscv_pmu_sbi.c
+++ b/drivers/perf/riscv_pmu_sbi.c
@@ -11,6 +11,9 @@
#include <linux/mod_devicetable.h>
#include <linux/perf/riscv_pmu.h>
#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
#include <asm/sbi.h>
@@ -445,33 +448,203 @@ static int pmu_sbi_get_ctrinfo(int nctr)
return 0;
}
+static inline void pmu_sbi_stop_all(struct riscv_pmu *pmu)
+{
+ /**
+ * No need to check the error because we are disabling all the counters
+ * which may include counters that are not enabled yet.
+ */
+ sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_STOP,
+ 0, GENMASK_ULL(pmu->num_counters - 1, 0), 0, 0, 0, 0);
+}
+
+static inline void pmu_sbi_start_all(struct riscv_pmu *pmu)
+{
+ int lidx;
+ struct cpu_hw_events *hwc = this_cpu_ptr(pmu->hw_events);
+ unsigned long flag = ~SBI_PMU_START_FLAG_SET_INIT_VALUE;
+
+ /* Start all the enabled counters without reinitilizing it */
+ for_each_set_bit(lidx, hwc->used_event_ctrs, RISCV_MAX_COUNTERS)
+ sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_START, lidx, 1, flag,
+ 0, 0, 0);
+}
+
+static irqreturn_t pmu_sbi_ovf_handler(int irq, void *dev)
+{
+ struct perf_sample_data data;
+ struct pt_regs *regs;
+ struct hw_perf_event *hw_evt;
+ union sbi_pmu_ctr_info *info;
+ int lidx, hidx, fidx;
+ struct riscv_pmu *pmu;
+ struct perf_event *event;
+ struct cpu_hw_events *hwc = dev;
+ unsigned long overflow;
+
+ fidx = find_first_bit(hwc->used_event_ctrs, RISCV_MAX_COUNTERS);
+ event = hwc->events[fidx];
+ if (!event) {
+ csr_clear(CSR_SIP, SIP_LCOFIP);
+ return IRQ_NONE;
+ }
+
+ pmu = to_riscv_pmu(event->pmu);
+ pmu_sbi_stop_all(pmu);
+
+ /* Overflow status register should only be read after counter are stopped */
+ overflow = csr_read(CSR_SSCOUNTOVF);
+
+ /**
+ * Overflow interrupt pending bit should only be cleared after stopping
+ * all the counters to avoid any race condition.
+ */
+ csr_clear(CSR_SIP, SIP_LCOFIP);
+
+ /* No overflow bit is set */
+ if (!overflow)
+ return IRQ_NONE;
+
+ regs = get_irq_regs();
+
+ for_each_set_bit(lidx, hwc->used_event_ctrs, RISCV_MAX_COUNTERS) {
+ struct perf_event *event = hwc->events[lidx];
+
+ /* Skip if invalid event or user did not request a sampling */
+ if (!event || !is_sampling_event(event))
+ continue;
+
+ info = &pmu_ctr_list[lidx];
+ /* Firmware counter don't support overflow yet */
+ if (!info || info->type == SBI_PMU_CTR_TYPE_FW)
+ continue;
+
+ /* compute hardware counter index */
+ hidx = info->csr - CSR_CYCLE;
+ /* check if the corresponding bit is set in sscountovf */
+ if (!(overflow & (1 << hidx)))
+ continue;
+
+ hw_evt = &event->hw;
+ riscv_pmu_event_update(event);
+ perf_sample_data_init(&data, 0, hw_evt->last_period);
+ /*
+ * Perf event overflow will queue the processing of the event as
+ * an irq_work which will be taken care of in the handling of
+ * IPI_IRQ_WORK.
+ */
+ if (perf_event_overflow(event, &data, regs))
+ pmu_sbi_ctr_stop(event, 0);
+ }
+ pmu_sbi_start_all(pmu);
+
+ return IRQ_HANDLED;
+}
+
static int pmu_sbi_starting_cpu(unsigned int cpu, struct hlist_node *node)
{
struct riscv_pmu *pmu = hlist_entry_safe(node, struct riscv_pmu, node);
+ struct cpu_hw_events __percpu *hw_events = pmu->hw_events;
+ int pmu_irq;
/* Enable the access for TIME csr only from the user mode now */
csr_write(CSR_SCOUNTEREN, 0x2);
/* Stop all the counters so that they can be enabled from perf */
- sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_STOP,
- 0, GENMASK_ULL(pmu->num_counters - 1, 0), 0, 0, 0, 0);
-
+ pmu_sbi_stop_all(pmu);
+ pmu_irq = per_cpu(hw_events->irq, cpu);
+ if (pmu_irq) {
+ csr_clear(CSR_IP, BIT(RV_IRQ_PMU));
+ csr_set(CSR_IE, BIT(RV_IRQ_PMU));
+ enable_percpu_irq(pmu_irq, IRQ_TYPE_NONE);
+ }
return 0;
}
static int pmu_sbi_dying_cpu(unsigned int cpu, struct hlist_node *node)
{
+ struct riscv_pmu *pmu = hlist_entry_safe(node, struct riscv_pmu, node);
+ struct cpu_hw_events __percpu *hw_events = pmu->hw_events;
+ int pmu_irq;
+
+ pmu_irq = per_cpu(hw_events->irq, cpu);
+ if (pmu_irq) {
+ disable_percpu_irq(pmu_irq);
+ csr_clear(CSR_IE, BIT(RV_IRQ_PMU));
+ }
/* Disable all counters access for user mode now */
csr_write(CSR_SCOUNTEREN, 0x0);
return 0;
}
+static int pmu_sbi_setup_irqs(struct riscv_pmu *pmu, struct platform_device *pdev)
+{
+ int i = 0, num_irqs, ret;
+ struct cpu_hw_events __percpu *hw_events = pmu->hw_events;
+ struct device *dev = &pdev->dev;
+ struct device_node *node = dev->of_node;
+
+ num_irqs = of_irq_count(node);
+
+ if (num_irqs <= 0) {
+ dev_warn(dev, "no irqs for PMU, sampling events not supported\n");
+ return -EPERM;
+ }
+
+ for (i = 0; i < num_irqs; i++) {
+ struct of_phandle_args parent;
+ irq_hw_number_t pmu_irq = 0;
+ int cpu, hartid;
+
+ if (of_irq_parse_one(node, i, &parent)) {
+ pr_err("%pOFP: failed to parse parent for irq %d.\n", node, i);
+ continue;
+ }
+
+ if (parent.args[0] != RV_IRQ_PMU) {
+ pr_err("%pOFP: invalid irq %d for hwirq %d.\n", node, i, parent.args[0]);
+ continue;
+ }
+
+ hartid = riscv_of_parent_hartid(parent.np);
+ if (hartid < 0) {
+ pr_warn("failed to parse hart ID for irq %d.\n", i);
+ continue;
+ }
+
+ cpu = riscv_hartid_to_cpuid(hartid);
+ if (cpu < 0) {
+ pr_warn("Invalid cpuid for irq %d\n", i);
+ continue;
+ }
+ if (!pmu_irq && irq_find_host(parent.np)) {
+ pmu_irq = irq_of_parse_and_map(node, i);
+ pr_err("%s: found irq %lu\n", __func__, pmu_irq);
+ if (pmu_irq)
+ ret = request_percpu_irq(pmu_irq, pmu_sbi_ovf_handler,
+ "riscv-pmu", hw_events);
+ if (ret) {
+ pr_err("registering percpu irq failed [%d]\n", ret);
+ return ret;
+ }
+ if (per_cpu(hw_events->irq, cpu)) {
+ pr_warn("PMU irq already set!!");
+ return -EINVAL;
+ }
+ per_cpu(hw_events->irq, cpu) = pmu_irq;
+ per_cpu(hw_events->sscof_ext_present, cpu) = true;
+ }
+ }
+
+ return 0;
+}
+
static int pmu_sbi_device_probe(struct platform_device *pdev)
{
struct riscv_pmu *pmu = NULL;
int num_counters;
- int ret;
+ int ret = -ENODEV;
pr_info("SBI PMU extension is available\n");
/* Notify legacy implementation that SBI pmu is available*/
@@ -483,13 +656,19 @@ static int pmu_sbi_device_probe(struct platform_device *pdev)
num_counters = pmu_sbi_find_num_ctrs();
if (num_counters < 0) {
pr_err("SBI PMU extension doesn't provide any counters\n");
- return -ENODEV;
+ goto out_free;
}
/* cache all the information about counters now */
if (pmu_sbi_get_ctrinfo(num_counters))
- return -ENODEV;
+ goto out_free;
+ ret = pmu_sbi_setup_irqs(pmu, pdev);
+ if (ret < 0) {
+ pr_info("Perf sampling/filtering is not supported as sscof extension is not available\n");
+ pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
+ pmu->pmu.capabilities |= PERF_PMU_CAP_NO_EXCLUDE;
+ }
pmu->num_counters = num_counters;
pmu->ctr_start = pmu_sbi_ctr_start;
pmu->ctr_stop = pmu_sbi_ctr_stop;
@@ -510,19 +689,27 @@ static int pmu_sbi_device_probe(struct platform_device *pdev)
}
return 0;
+
+out_free:
+ kfree(pmu);
+ return ret;
}
+static const struct of_device_id riscv_pmu_of_device_ids[] = {
+ {.compatible = "riscv,pmu", .data = NULL},
+};
+
static struct platform_driver pmu_sbi_driver = {
.probe = pmu_sbi_device_probe,
.driver = {
.name = RISCV_PMU_PDEV_NAME,
+ .of_match_table = riscv_pmu_of_device_ids,
},
};
static int __init pmu_sbi_devinit(void)
{
int ret;
- struct platform_device *pdev;
if (((sbi_major_version() == 0) && (sbi_minor_version() < 3)) ||
sbi_probe_extension(SBI_EXT_PMU) <= 0) {
@@ -539,14 +726,6 @@ static int __init pmu_sbi_devinit(void)
}
ret = platform_driver_register(&pmu_sbi_driver);
- if (ret)
- return ret;
-
- pdev = platform_device_register_simple(RISCV_PMU_PDEV_NAME, -1, NULL, 0);
- if (IS_ERR(pdev)) {
- platform_driver_unregister(&pmu_sbi_driver);
- return PTR_ERR(pdev);
- }
return ret;
}
diff --git a/include/linux/perf/riscv_pmu.h b/include/linux/perf/riscv_pmu.h
index f3bce79d8998..afd93840754b 100644
--- a/include/linux/perf/riscv_pmu.h
+++ b/include/linux/perf/riscv_pmu.h
@@ -29,10 +29,13 @@
struct cpu_hw_events {
/* currently enabled events */
int n_events;
+ /* Counter overflow interrupt */
+ int irq;
/* currently enabled events */
struct perf_event *events[RISCV_MAX_COUNTERS];
/* currently enabled counters */
DECLARE_BITMAP(used_event_ctrs, RISCV_MAX_COUNTERS);
+ bool sscof_ext_present;
};
struct riscv_pmu {
@@ -40,7 +43,6 @@ struct riscv_pmu {
char *name;
irqreturn_t (*handle_irq)(int irq_num, void *dev);
- int irq;
int num_counters;
u64 (*ctr_read)(struct perf_event *event);
--
2.31.1
More information about the linux-riscv
mailing list