[PATCH 1/1] dt-bindings: T-HEAD CLINT

Rob Herring robh at kernel.org
Fri Oct 22 14:22:17 PDT 2021


On Wed, Oct 20, 2021 at 11:36:03AM +0200, Heinrich Schuchardt wrote:
> The CLINT in the T-HEAD 9xx CPUs is similar to the SiFive CLINT but does
> not support 64bit mmio access to the MTIMER device.
> 
> OpenSBI currently uses a property 'clint,has-no-64bit-mmio' to indicate the
> restriction and the "sifive,cling0" compatible string. An OpenSBI
> patch suggested to use "reg-io-width = <4>;" as the reg-io-width property
> is generally used in the devicetree schema for such a condition.
> 
> As the design is not SiFive based it is preferable to apply a compatible
> string identifying T-HEAD instead.
> 
> Add a new yaml file describing the T-HEAD CLINT.
> 
> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt at canonical.com>
> ---
> @Palmer, @Anup
> I copied you as maintainers from sifive,clint.yaml. Please, indicate if
> this should be changed.
> 
> For the prior discussion see:
> https://lore.kernel.org/all/20211015100941.17621-1-heinrich.schuchardt@canonical.com/
> https://lore.kernel.org/all/20211015120735.27972-1-heinrich.schuchardt@canonical.com/
> 
> A release candidate of the ACLINT specification is available at
> https://github.com/riscv/riscv-aclint/releases
> ---
>  .../bindings/timer/thead,clint.yaml           | 62 +++++++++++++++++++
>  1 file changed, 62 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/timer/thead,clint.yaml
> 
> diff --git a/Documentation/devicetree/bindings/timer/thead,clint.yaml b/Documentation/devicetree/bindings/timer/thead,clint.yaml
> new file mode 100644
> index 000000000000..02463fb2043a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/thead,clint.yaml
> @@ -0,0 +1,62 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/timer/thead,clint.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: SiFive Core Local Interruptor
> +
> +maintainers:
> +  - Palmer Dabbelt <palmer at dabbelt.com>
> +  - Anup Patel <anup.patel at wdc.com>
> +
> +description:
> +  T-HEAD (and other RISC-V) SOCs include an implementation of the T-HEAD
> +  Core Local Interruptor (CLINT) for M-mode timer and M-mode inter-processor
> +  interrupts. It directly connects to the timer and inter-processor interrupt
> +  lines of various HARTs (or CPUs) so RISC-V per-HART (or per-CPU) local
> +  interrupt controller is the parent interrupt controller for CLINT device.
> +  The clock frequency of the CLINT is specified via "timebase-frequency" DT
> +  property of "/cpus" DT node. The "timebase-frequency" DT property is
> +  described in Documentation/devicetree/bindings/riscv/cpus.yaml
> +
> +properties:
> +  compatible:
> +    items:
> +      - const:
> +          - allwinner,sun20i-d1-clint
> +      - const:
> +          - thead,clint0
> +
> +    description:
> +      Should be "<vendor>,<chip>-clint" and "thead,clint<version>" for
> +      the T-HEAD derived CLINTs.
> +      Supported compatible strings are -
> +      "allwinner,sun20i-d1-clint" for the CLINT in the Allwinner D1 SoC
> +      and "thead,clint0" for the T-HEAD IP block with no chip
> +      integration tweaks.

T-HEAD uses the same versioning as SiFive? If you use version numbers in 
compatible strings, the numbering needs to be documented and correlate 
back to the h/w design. See [1]. IP release numbers for FPGA IP for 
example. What it should not be is the binding author making up 0, 1, 2, 
etc. versions.

Rob

[1] Documentation/devicetree/bindings/sifive/sifive-blocks-ip-versioning.txt




More information about the linux-riscv mailing list