[PATCH V3 1/2] dt-bindings: update riscv plic compatible string

[Guo Ren]

On Wed, Oct 13, 2021 at 5:43 PM Heiko Stübner <heiko at sntech.de> wrote:
>
> Am Mittwoch, 13. Oktober 2021, 11:19:53 CEST schrieb Anup Patel:
> > On Wed, Oct 13, 2021 at 2:44 PM Heiko Stübner <heiko at sntech.de> wrote:
> > >
> > > Am Mittwoch, 13. Oktober 2021, 11:11:26 CEST schrieb Anup Patel:
> > > > On Wed, Oct 13, 2021 at 2:27 PM Heiko Stübner <heiko at sntech.de> wrote:
> > > > >
> > > > > Hi Anup,
> > > > >
> > > > > Am Mittwoch, 13. Oktober 2021, 07:11:46 CEST schrieb Anup Patel:
> > > > > > On Wed, Oct 13, 2021 at 6:52 AM <guoren at kernel.org> wrote:
> > > > > > >
> > > > > > > From: Guo Ren <guoren at linux.alibaba.com>
> > > > > > >
> > > > > > > Add the compatible string "thead,c900-plic" to the riscv plic
> > > > > > > bindings to support SOCs with thead,c9xx processor cores.
> > > > > > >
> > > > > > > Signed-off-by: Guo Ren <guoren at linux.alibaba.com>
> > > > > > > Cc: Rob Herring <robh at kernel.org>
> > > > > > > Cc: Palmer Dabbelt <palmerdabbelt at google.com>
> > > > > > > Cc: Anup Patel <anup at brainfault.org>
> > > > > > > Cc: Atish Patra <atish.patra at wdc.com>
> > > > > > >
> > > > > > > ---
> > > > > > >
> > > > > > > Changes since V3:
> > > > > > >  - Rename "c9xx" to "c900"
> > > > > > >  - Add thead,c900-plic in the description section
> > > > > > > ---
> > > > > > >  .../bindings/interrupt-controller/sifive,plic-1.0.0.yaml    | 6 ++++++
> > > > > > >  1 file changed, 6 insertions(+)
> > > > > > >
> > > > > > > diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
> > > > > > > index 08d5a57ce00f..82629832e5a5 100644
> > > > > > > --- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
> > > > > > > +++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
> > > > > > > @@ -35,6 +35,11 @@ description:
> > > > > > >    contains a specific memory layout, which is documented in chapter 8 of the
> > > > > > >    SiFive U5 Coreplex Series Manual <https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf>.
> > > > > > >
> > > > > > > +  While the "thead,c900-plic" would mask IRQ with readl(claim), so it needn't
> > > > > > > +  mask/unmask which needed in RISC-V PLIC. When in IRQS_ONESHOT & IRQCHIP_EOI_THREADED
> > > > > > > +  path, unnecessary mask operation would cause a blocking irq bug in thead,c900-plic.
> > > > > > > +  Because when IRQ is disabled in c900, writel(hwirq, claim) would be invalid.
> > > > > >
> > > > > > This is a totally incorrect description of the errata required for C9xx PLIC.
> > > > > >
> > > > > > Please don't project non-compliance as a feature of C9xx PLIC.
> > > > > >
> > > > > > > +
> > > > > > >  maintainers:
> > > > > > >    - Sagar Kadam <sagar.kadam at sifive.com>
> > > > > > >    - Paul Walmsley  <paul.walmsley at sifive.com>
> > > > > > > @@ -46,6 +51,7 @@ properties:
> > > > > > >        - enum:
> > > > > > >            - sifive,fu540-c000-plic
> > > > > > >            - canaan,k210-plic
> > > > > > > +          - thead,c900-plic
> > > > >
> > > > > we still want specific SoC names in the compatible, the "c900"
> > > > > is still a sort-of placeholder.
> > > >
> > > > Yes, we need "c900" compatible string as well. The "c9xx"
> > > > compatible string is for the custom PLIC spec followed by T-HEAD.
> > >
> > > What I meant was that the soc-specific string should name the
> > > actual SoC (c906, c910) and not some imaginary chip ;-)
> >
> > Ahh, yes. It should be an actual soc name in the compatible
> > string.
> >
> > For example, SiFive uses "fu540" string to identify some of the
> > devices on both SiFive unleashed and SiFive unmatched boards.
> >
> > I was under the impression that "c900" is an actual SoC name.
> >
> > Regards,
> > Anup
> >
> > >
> > > See for example mali gpu bindings for a similar reference
> > > in devicetree/bindings/gpu/arm,mali-bifrost.yaml .
> > >
> > >
> > >
> > >
> > > >
> > > > >
> > > > >
> > > > > > >        - const: sifive,plic-1.0.0
> > > > > >
> > > > > > The PLIC DT node requires two compatible string:
> > > > > > <implementation_compat>, <spec_compat>
> > > > > >
> > > > > > The C9xx PLIC is not RISC-V PLIC so, the DT node should
> > > > > > be: "thead,c900-plic", "thead,c9xx-plic"
> > > > > >
> > > > > > You need to change "- const: sifive,plic-1.0.0" to
> > > > > > - enum:
> > > > > >     - sifive,plic-1.0.0
> > > > > >     - thead,c9xx-plic
>
> isn't XuanTie the series containing the c906 and c910?
XuanTie contain two CPU series:
riscv: c906, c910
csky: c807, c810, c860

> So maybe
>         thead,xuantie-plic
> for the spec compatible.
>
> So doing in full
>         compatible = "thead,c906-plic", "thead,xuantie-plic"
How about:
compatible = "allwinner,d1-plic", "thead,c900-plic"

>
>
> Heiko
>
>


-- 
Best Regards
 Guo Ren

ML: https://lore.kernel.org/linux-csky/