[PATCH v4 4/6] riscv: dts: microchip: drop duplicated MMC/SDHC node

[Conor.Dooley at microchip.com]

On 27/09/2021 13:50, Krzysztof Kozlowski wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> Devicetree source is a description of hardware and hardware has only one
> block @20008000 which can be configured either as eMMC or SDHC.  Having
> two node for different modes is an obscure, unusual and confusing way to
> configure it.  Instead the board file is supposed to customize the block
> to its needs, e.g. to SDHC mode.
>
> This fixes dtbs_check warning:
>    arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dt.yaml: sdhc at 20008000: $nodename:0: 'sdhc at 20008000' does not match '^mmc(@.*)?$'
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at canonical.com>
>
> ---
>
> Changes since v3:
> 1. Keep two interrupts.
> 2. Add comment.
>
> Changes since v1:
> 1. Move also bus-width, suggested by Geert.
> ---
>   .../microchip/microchip-mpfs-icicle-kit.dts   | 11 ++++++-
>   .../boot/dts/microchip/microchip-mpfs.dtsi    | 29 ++-----------------
>   2 files changed, 12 insertions(+), 28 deletions(-)
>
> diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
> index 07f1f3cab686..fc1e5869df1b 100644
> --- a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
> +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
> @@ -51,8 +51,17 @@ &serial3 {
>          status = "okay";
>   };
>
> -&sdcard {
> +&mmc {
>          status = "okay";
> +
> +       bus-width = <4>;
> +       disable-wp;
> +       cap-sd-highspeed;
> +       card-detect-delay = <200>;
> +       sd-uhs-sdr12;
> +       sd-uhs-sdr25;
> +       sd-uhs-sdr50;
> +       sd-uhs-sdr104;
>   };
>
>   &emac0 {
> diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> index 1d04c661bccf..b15e93d1702b 100644
> --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> @@ -262,39 +262,14 @@ serial3: serial at 20104000 {
>                          status = "disabled";
>                  };
>
> -               emmc: mmc at 20008000 {
> +               /* Common node entry for emmc/sd */
> +               mmc: mmc at 20008000 {
>                          compatible = "cdns,sd4hc";
>                          reg = <0x0 0x20008000 0x0 0x1000>;
>                          interrupt-parent = <&plic>;
>                          interrupts = <88 89>;
>                          pinctrl-names = "default";
>                          clocks = <&clkcfg 6>;
> -                       bus-width = <4>;
> -                       cap-mmc-highspeed;
> -                       mmc-ddr-3_3v;
> -                       max-frequency = <200000000>;
> -                       non-removable;
> -                       no-sd;
> -                       no-sdio;
> -                       voltage-ranges = <3300 3300>;
> -                       status = "disabled";
> -               };
> -
> -               sdcard: sdhc at 20008000 {
> -                       compatible = "cdns,sd4hc";
> -                       reg = <0x0 0x20008000 0x0 0x1000>;
> -                       interrupt-parent = <&plic>;
> -                       interrupts = <88>;
> -                       pinctrl-names = "default";
> -                       clocks = <&clkcfg 6>;
> -                       bus-width = <4>;
> -                       disable-wp;
> -                       cap-sd-highspeed;
> -                       card-detect-delay = <200>;
> -                       sd-uhs-sdr12;
> -                       sd-uhs-sdr25;
> -                       sd-uhs-sdr50;
> -                       sd-uhs-sdr104;
>                          max-frequency = <200000000>;
>                          status = "disabled";
>                  };
> --
> 2.30.2
>
Reviewed-by: Conor Dooley<conor.dooley at microchip.com>