[PATCH v20 00/17] KVM RISC-V Support
Ley Foon Tan
lftan.linux at gmail.com
Fri Oct 1 02:02:58 PDT 2021
On Mon, Sep 27, 2021 at 8:01 PM Anup Patel <anup at brainfault.org> wrote:
>
> Hi Palmer, Hi Paolo,
>
> On Mon, Sep 27, 2021 at 5:10 PM Anup Patel <anup.patel at wdc.com> wrote:
> >
> > This series adds initial KVM RISC-V support. Currently, we are able to boot
> > Linux on RV64/RV32 Guest with multiple VCPUs.
> >
> > Key aspects of KVM RISC-V added by this series are:
> > 1. No RISC-V specific KVM IOCTL
> > 2. Loadable KVM RISC-V module supported
> > 3. Minimal possible KVM world-switch which touches only GPRs and few CSRs
> > 4. Both RV64 and RV32 host supported
> > 5. Full Guest/VM switch is done via vcpu_get/vcpu_put infrastructure
> > 6. KVM ONE_REG interface for VCPU register access from user-space
> > 7. PLIC emulation is done in user-space
> > 8. Timer and IPI emuation is done in-kernel
> > 9. Both Sv39x4 and Sv48x4 supported for RV64 host
> > 10. MMU notifiers supported
> > 11. Generic dirtylog supported
> > 12. FP lazy save/restore supported
> > 13. SBI v0.1 emulation for KVM Guest available
> > 14. Forward unhandled SBI calls to KVM userspace
> > 15. Hugepage support for Guest/VM
> > 16. IOEVENTFD support for Vhost
> >
> > Here's a brief TODO list which we will work upon after this series:
> > 1. KVM unit test support
> > 2. KVM selftest support
> > 3. SBI v0.3 emulation in-kernel
> > 4. In-kernel PMU virtualization
> > 5. In-kernel AIA irqchip support
> > 6. Nested virtualizaiton
> > 7. ..... and more .....
> >
> > This series can be found in riscv_kvm_v20 branch at:
> > https//github.com/avpatel/linux.git
> >
> > Our work-in-progress KVMTOOL RISC-V port can be found in riscv_v9 branch
> > at: https//github.com/avpatel/kvmtool.git
> >
> > The QEMU RISC-V hypervisor emulation is done by Alistair and is available
> > in master branch at: https://git.qemu.org/git/qemu.git
> >
> > To play around with KVM RISC-V, refer KVM RISC-V wiki at:
> > https://github.com/kvm-riscv/howto/wiki
> > https://github.com/kvm-riscv/howto/wiki/KVM-RISCV64-on-QEMU
> > https://github.com/kvm-riscv/howto/wiki/KVM-RISCV64-on-Spike
> >
> > Changes since v19:
> > - Rebased on Linux-5.15-rc3
> > - Converted kvm_err() to kvm_debug() in kvm_set_spte_gfn() function
> > added by PATCH11
> >
> > Changes since v18:
> > - Rebased on Linux-5.14-rc3
> > - Moved to new KVM debugfs interface
> > - Dropped PATCH17 of v18 series for having KVM RISC-V in drivers/staging
> >
> > Changes since v17:
> > - Rebased on Linux-5.13-rc2
> > - Moved to new KVM MMU notifier APIs
> > - Removed redundant kvm_arch_vcpu_uninit()
> > - Moved KVM RISC-V sources to drivers/staging for compliance with
> > Linux RISC-V patch acceptance policy
> >
> > Changes since v16:
> > - Rebased on Linux-5.12-rc5
> > - Remove redundant kvm_arch_create_memslot(), kvm_arch_vcpu_setup(),
> > kvm_arch_vcpu_init(), kvm_arch_has_vcpu_debugfs(), and
> > kvm_arch_create_vcpu_debugfs() from PATCH5
> > - Make stage2_wp_memory_region() and stage2_ioremap() as static
> > in PATCH13
> >
> > Changes since v15:
> > - Rebased on Linux-5.11-rc3
> > - Fixed kvm_stage2_map() to use gfn_to_pfn_prot() for determing
> > writeability of a host pfn.
> > - Use "__u64" in-place of "u64" and "__u32" in-place of "u32" for
> > uapi/asm/kvm.h
> >
> > Changes since v14:
> > - Rebased on Linux-5.10-rc3
> > - Fixed Stage2 (G-stage) PDG allocation to ensure it is 16KB aligned
> >
> > Changes since v13:
> > - Rebased on Linux-5.9-rc3
> > - Fixed kvm_riscv_vcpu_set_reg_csr() for SIP updation in PATCH5
> > - Fixed instruction length computation in PATCH7
> > - Added ioeventfd support in PATCH7
> > - Ensure HSTATUS.SPVP is set to correct value before using HLV/HSV
> > intructions in PATCH7
> > - Fixed stage2_map_page() to set PTE 'A' and 'D' bits correctly
> > in PATCH10
> > - Added stage2 dirty page logging in PATCH10
> > - Allow KVM user-space to SET/GET SCOUNTER CSR in PATCH5
> > - Save/restore SCOUNTEREN in PATCH6
> > - Reduced quite a few instructions for __kvm_riscv_switch_to() by
> > using CSR swap instruction in PATCH6
> > - Detect and use Sv48x4 when available in PATCH10
> >
> > Changes since v12:
> > - Rebased patches on Linux-5.8-rc4
> > - By default enable all counters in HCOUNTEREN
> > - RISC-V H-Extension v0.6.1 spec support
> >
> > Changes since v11:
> > - Rebased patches on Linux-5.7-rc3
> > - Fixed typo in typecast of stage2_map_size define
> > - Introduced struct kvm_cpu_trap to represent trap details and
> > use it as function parameter wherever applicable
> > - Pass memslot to kvm_riscv_stage2_map() for supporing dirty page
> > logging in future
> > - RISC-V H-Extension v0.6 spec support
> > - Send-out first three patches as separate series so that it can
> > be taken by Palmer for Linux RISC-V
> >
> > Changes since v10:
> > - Rebased patches on Linux-5.6-rc5
> > - Reduce RISCV_ISA_EXT_MAX from 256 to 64
> > - Separate PATCH for removing N-extension related defines
> > - Added comments as requested by Palmer
> > - Fixed HIDELEG CSR programming
> >
> > Changes since v9:
> > - Rebased patches on Linux-5.5-rc3
> > - Squash PATCH19 and PATCH20 into PATCH5
> > - Squash PATCH18 into PATCH11
> > - Squash PATCH17 into PATCH16
> > - Added ONE_REG interface for VCPU timer in PATCH13
> > - Use HTIMEDELTA for VCPU timer in PATCH13
> > - Updated KVM RISC-V mailing list in MAINTAINERS entry
> > - Update KVM kconfig option to depend on RISCV_SBI and MMU
> > - Check for SBI v0.2 and SBI v0.2 RFENCE extension at boot-time
> > - Use SBI v0.2 RFENCE extension in VMID implementation
> > - Use SBI v0.2 RFENCE extension in Stage2 MMU implementation
> > - Use SBI v0.2 RFENCE extension in SBI implementation
> > - Moved to RISC-V Hypervisor v0.5 draft spec
> > - Updated Documentation/virt/kvm/api.txt for timer ONE_REG interface
> >
> > Changes since v8:
> > - Rebased series on Linux-5.4-rc3 and Atish's SBI v0.2 patches
> > - Use HRTIMER_MODE_REL instead of HRTIMER_MODE_ABS in timer emulation
> > - Fixed kvm_riscv_stage2_map() to handle hugepages
> > - Added patch to forward unhandled SBI calls to user-space
> > - Added patch for iterative/recursive stage2 page table programming
> > - Added patch to remove per-CPU vsip_shadow variable
> > - Added patch to fix race-condition in kvm_riscv_vcpu_sync_interrupts()
> >
> > Changes since v7:
> > - Rebased series on Linux-5.4-rc1 and Atish's SBI v0.2 patches
> > - Removed PATCH1, PATCH3, and PATCH20 because these already merged
> > - Use kernel doc style comments for ISA bitmap functions
> > - Don't parse X, Y, and Z extension in riscv_fill_hwcap() because it will
> > be added in-future
> > - Mark KVM RISC-V kconfig option as EXPERIMENTAL
> > - Typo fix in commit description of PATCH6 of v7 series
> > - Use separate structs for CORE and CSR registers of ONE_REG interface
> > - Explicitly include asm/sbi.h in kvm/vcpu_sbi.c
> > - Removed implicit switch-case fall-through in kvm_riscv_vcpu_exit()
> > - No need to set VSSTATUS.MXR bit in kvm_riscv_vcpu_unpriv_read()
> > - Removed register for instruction length in kvm_riscv_vcpu_unpriv_read()
> > - Added defines for checking/decoding instruction length
> > - Added separate patch to forward unhandled SBI calls to userspace tool
> >
> > Changes since v6:
> > - Rebased patches on Linux-5.3-rc7
> > - Added "return_handled" in struct kvm_mmio_decode to ensure that
> > kvm_riscv_vcpu_mmio_return() updates SEPC only once
> > - Removed trap_stval parameter from kvm_riscv_vcpu_unpriv_read()
> > - Updated git repo URL in MAINTAINERS entry
> >
> > Changes since v5:
> > - Renamed KVM_REG_RISCV_CONFIG_TIMEBASE register to
> > KVM_REG_RISCV_CONFIG_TBFREQ register in ONE_REG interface
> > - Update SPEC in kvm_riscv_vcpu_mmio_return() for MMIO exits
> > - Use switch case instead of illegal instruction opcode table for simplicity
> > - Improve comments in stage2_remote_tlb_flush() for a potential remote TLB
> > flush optimization
> > - Handle all unsupported SBI calls in default case of
> > kvm_riscv_vcpu_sbi_ecall() function
> > - Fixed kvm_riscv_vcpu_sync_interrupts() for software interrupts
> > - Improved unprivilege reads to handle traps due to Guest stage1 page table
> > - Added separate patch to document RISC-V specific things in
> > Documentation/virt/kvm/api.txt
> >
> > Changes since v4:
> > - Rebased patches on Linux-5.3-rc5
> > - Added Paolo's Acked-by and Reviewed-by
> > - Updated mailing list in MAINTAINERS entry
> >
> > Changes since v3:
> > - Moved patch for ISA bitmap from KVM prep series to this series
> > - Make vsip_shadow as run-time percpu variable instead of compile-time
> > - Flush Guest TLBs on all Host CPUs whenever we run-out of VMIDs
> >
> > Changes since v2:
> > - Removed references of KVM_REQ_IRQ_PENDING from all patches
> > - Use kvm->srcu within in-kernel KVM run loop
> > - Added percpu vsip_shadow to track last value programmed in VSIP CSR
> > - Added comments about irqs_pending and irqs_pending_mask
> > - Used kvm_arch_vcpu_runnable() in-place-of kvm_riscv_vcpu_has_interrupt()
> > in system_opcode_insn()
> > - Removed unwanted smp_wmb() in kvm_riscv_stage2_vmid_update()
> > - Use kvm_flush_remote_tlbs() in kvm_riscv_stage2_vmid_update()
> > - Use READ_ONCE() in kvm_riscv_stage2_update_hgatp() for vmid
> >
> > Changes since v1:
> > - Fixed compile errors in building KVM RISC-V as module
> > - Removed unused kvm_riscv_halt_guest() and kvm_riscv_resume_guest()
> > - Set KVM_CAP_SYNC_MMU capability only after MMU notifiers are implemented
> > - Made vmid_version as unsigned long instead of atomic
> > - Renamed KVM_REQ_UPDATE_PGTBL to KVM_REQ_UPDATE_HGATP
> > - Renamed kvm_riscv_stage2_update_pgtbl() to kvm_riscv_stage2_update_hgatp()
> > - Configure HIDELEG and HEDELEG in kvm_arch_hardware_enable()
> > - Updated ONE_REG interface for CSR access to user-space
> > - Removed irqs_pending_lock and use atomic bitops instead
> > - Added separate patch for FP ONE_REG interface
> > - Added separate patch for updating MAINTAINERS file
> >
> > Anup Patel (13):
> > RISC-V: Add hypervisor extension related CSR defines
> > RISC-V: Add initial skeletal KVM support
> > RISC-V: KVM: Implement VCPU create, init and destroy functions
> > RISC-V: KVM: Implement VCPU interrupts and requests handling
> > RISC-V: KVM: Implement KVM_GET_ONE_REG/KVM_SET_ONE_REG ioctls
> > RISC-V: KVM: Implement VCPU world-switch
> > RISC-V: KVM: Handle MMIO exits for VCPU
> > RISC-V: KVM: Handle WFI exits for VCPU
> > RISC-V: KVM: Implement VMID allocator
> > RISC-V: KVM: Implement stage2 page table programming
> > RISC-V: KVM: Implement MMU notifiers
> > RISC-V: KVM: Document RISC-V specific parts of KVM API
> > RISC-V: KVM: Add MAINTAINERS entry
> >
> > Atish Patra (4):
> > RISC-V: KVM: Add timer functionality
> > RISC-V: KVM: FP lazy save/restore
> > RISC-V: KVM: Implement ONE REG interface for FP registers
> > RISC-V: KVM: Add SBI v0.1 support
> >
> > Documentation/virt/kvm/api.rst | 193 ++++-
> > MAINTAINERS | 12 +
> > arch/riscv/Kconfig | 1 +
> > arch/riscv/Makefile | 1 +
> > arch/riscv/include/asm/csr.h | 87 +++
> > arch/riscv/include/asm/kvm_host.h | 266 +++++++
> > arch/riscv/include/asm/kvm_types.h | 7 +
> > arch/riscv/include/asm/kvm_vcpu_timer.h | 44 ++
> > arch/riscv/include/uapi/asm/kvm.h | 128 +++
> > arch/riscv/kernel/asm-offsets.c | 156 ++++
> > arch/riscv/kvm/Kconfig | 36 +
> > arch/riscv/kvm/Makefile | 25 +
> > arch/riscv/kvm/main.c | 118 +++
> > arch/riscv/kvm/mmu.c | 802 +++++++++++++++++++
> > arch/riscv/kvm/tlb.S | 74 ++
> > arch/riscv/kvm/vcpu.c | 997 ++++++++++++++++++++++++
> > arch/riscv/kvm/vcpu_exit.c | 701 +++++++++++++++++
> > arch/riscv/kvm/vcpu_sbi.c | 185 +++++
> > arch/riscv/kvm/vcpu_switch.S | 400 ++++++++++
> > arch/riscv/kvm/vcpu_timer.c | 225 ++++++
> > arch/riscv/kvm/vm.c | 97 +++
> > arch/riscv/kvm/vmid.c | 120 +++
> > drivers/clocksource/timer-riscv.c | 9 +
> > include/clocksource/timer-riscv.h | 16 +
> > include/uapi/linux/kvm.h | 8 +
> > 25 files changed, 4699 insertions(+), 9 deletions(-)
> > create mode 100644 arch/riscv/include/asm/kvm_host.h
> > create mode 100644 arch/riscv/include/asm/kvm_types.h
> > create mode 100644 arch/riscv/include/asm/kvm_vcpu_timer.h
> > create mode 100644 arch/riscv/include/uapi/asm/kvm.h
> > create mode 100644 arch/riscv/kvm/Kconfig
> > create mode 100644 arch/riscv/kvm/Makefile
> > create mode 100644 arch/riscv/kvm/main.c
> > create mode 100644 arch/riscv/kvm/mmu.c
> > create mode 100644 arch/riscv/kvm/tlb.S
> > create mode 100644 arch/riscv/kvm/vcpu.c
> > create mode 100644 arch/riscv/kvm/vcpu_exit.c
> > create mode 100644 arch/riscv/kvm/vcpu_sbi.c
> > create mode 100644 arch/riscv/kvm/vcpu_switch.S
> > create mode 100644 arch/riscv/kvm/vcpu_timer.c
> > create mode 100644 arch/riscv/kvm/vm.c
> > create mode 100644 arch/riscv/kvm/vmid.c
> > create mode 100644 include/clocksource/timer-riscv.h
> >
> > --
> > 2.25.1
> >
>
> The RISC-V H-extension is now frozen. Please refer to the latest
> RISC-V privilege specification v1.12 which is in public review.
> https://github.com/riscv/riscv-isa-manual/releases/download/riscv-privileged-20210915-public-review/riscv-privileged-20210915-public-review.pdf
>
> Currently, the RISC-V H-extension is on it's way to being ratified.
> https://wiki.riscv.org/display/TECH/ISA+Extensions+On+Deck+for+Freeze+Milestone
> https://wiki.riscv.org/display/TECH/ISA+Extensions+On+Deck+-+Ready+for+Ratification+Milestone
>
> Here's the announcement on twitter from Mark (CTO, RISC-V International)
> https://twitter.com/mark_riscv/status/1441375977624375296
>
> This means the KVM RISC-V series now satisfies the
> requirements of the Linux RISC-V patch acceptance policy.
>
> Can we consider the KVM RISC-V series for Linux-5.16 ?
>
> Regards,
> Anup
Hi Anup
I have tried this patchset, but have problems starting the kvm on host linux.
Both Qemu and Spike are unable to run kvm.
1. Qemu: have the following error when starting kvm.
[ 17.877101] Run /init as init process
[ 217.908013] kvm [61]: VCPU exit error -14
[ 217.908577] kvm [61]: SEPC=0x7e86a SSTATUS=0x4020 HSTATUS=0x200200080
[ 217.909626] kvm [61]: SCAUSE=0x2 STVAL=0x20866633 HTVAL=0x0 HTINST=0x0
KVM_RUN failed: Bad address
2. Spike: Stop at this line when starting kvm.
[ 1.116675] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 1.120875] NET: Registered PF_PACKET protocol family
[ 1.123830] 9pnet: Installing 9P2000 support
[ 1.127935] Key type dns_resolver registered
[ 1.130390] debug_vm_pgtable: [debug_vm_pgtable ]:
Validating architecture page table helpers
These are the git repo that I'm using:
Linux: https://github.com/avpatel/linux/tree/riscv_kvm_v20
Qemu: https://gitlab.com/qemu-project/qemu.git (master branch)
Spike: https://github.com/riscv/riscv-isa-sim.git (master branch)
kvm-tool: https//github.com/avpatel/kvmtool.git
Any other things that need to be updated to make it work?
Note, previous v19 patchset is okay.
Regards
Ley Foon
More information about the linux-riscv
mailing list