[PATCH AUTOSEL 5.15 4/7] riscv: dts: microchip: drop duplicated MMC/SDHC node

[Sasha Levin]

From: Krzysztof Kozlowski <krzysztof.kozlowski at canonical.com>

[ Upstream commit 42a57a47bb0c0f531321a7001972a3ca121409bd ]

Devicetree source is a description of hardware and hardware has only one
block @20008000 which can be configured either as eMMC or SDHC.  Having
two node for different modes is an obscure, unusual and confusing way to
configure it.  Instead the board file is supposed to customize the block
to its needs, e.g. to SDHC mode.

This fixes dtbs_check warning:
  arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dt.yaml: sdhc at 20008000: $nodename:0: 'sdhc at 20008000' does not match '^mmc(@.*)?$'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at canonical.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt at google.com>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 .../microchip/microchip-mpfs-icicle-kit.dts   | 11 ++++++-
 .../boot/dts/microchip/microchip-mpfs.dtsi    | 29 ++-----------------
 2 files changed, 12 insertions(+), 28 deletions(-)

diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
index be0d77624cf53..cce5eca31f257 100644
--- a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
+++ b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
@@ -56,8 +56,17 @@ &serial3 {
 	status = "okay";
 };
 
-&sdcard {
+&mmc {
 	status = "okay";
+
+	bus-width = <4>;
+	disable-wp;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
 };
 
 &emac0 {
diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
index 446f41d6a87e9..b12fd594e7172 100644
--- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
@@ -262,39 +262,14 @@ serial3: serial at 20104000 {
 			status = "disabled";
 		};
 
-		emmc: mmc at 20008000 {
+		/* Common node entry for emmc/sd */
+		mmc: mmc at 20008000 {
 			compatible = "cdns,sd4hc";
 			reg = <0x0 0x20008000 0x0 0x1000>;
 			interrupt-parent = <&plic>;
 			interrupts = <88 89>;
 			pinctrl-names = "default";
 			clocks = <&clkcfg 6>;
-			bus-width = <4>;
-			cap-mmc-highspeed;
-			mmc-ddr-3_3v;
-			max-frequency = <200000000>;
-			non-removable;
-			no-sd;
-			no-sdio;
-			voltage-ranges = <3300 3300>;
-			status = "disabled";
-		};
-
-		sdcard: sdhc at 20008000 {
-			compatible = "cdns,sd4hc";
-			reg = <0x0 0x20008000 0x0 0x1000>;
-			interrupt-parent = <&plic>;
-			interrupts = <88>;
-			pinctrl-names = "default";
-			clocks = <&clkcfg 6>;
-			bus-width = <4>;
-			disable-wp;
-			cap-sd-highspeed;
-			card-detect-delay = <200>;
-			sd-uhs-sdr12;
-			sd-uhs-sdr25;
-			sd-uhs-sdr50;
-			sd-uhs-sdr104;
 			max-frequency = <200000000>;
 			status = "disabled";
 		};
-- 
2.33.0