[PATCH 8/9] riscv: dts: sifive: Group tuples in interrupt properties

[Geert Uytterhoeven]

To improve human readability and enable automatic validation, the tuples
in the various properties containing interrupt specifiers should be
grouped.

Fix this by grouping the tuples of "interrupts" and
"interrupts-extended" properties using angle brackets.

Signed-off-by: Geert Uytterhoeven <geert at linux-m68k.org>
---
 arch/riscv/boot/dts/sifive/fu540-c000.dtsi | 21 +++++++++++----------
 arch/riscv/boot/dts/sifive/fu740-c000.dtsi | 14 +++++++-------
 2 files changed, 18 insertions(+), 17 deletions(-)

diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
index 35d75a8aa8cc9031..e2efcf08210926f8 100644
--- a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
+++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
@@ -145,12 +145,12 @@ plic0: interrupt-controller at c000000 {
 			reg = <0x0 0xc000000 0x0 0x4000000>;
 			riscv,ndev = <53>;
 			interrupt-controller;
-			interrupts-extended = <
-				&cpu0_intc 0xffffffff
-				&cpu1_intc 0xffffffff &cpu1_intc 9
-				&cpu2_intc 0xffffffff &cpu2_intc 9
-				&cpu3_intc 0xffffffff &cpu3_intc 9
-				&cpu4_intc 0xffffffff &cpu4_intc 9>;
+			interrupts-extended =
+				<&cpu0_intc 0xffffffff>,
+				<&cpu1_intc 0xffffffff>, <&cpu1_intc 9>,
+				<&cpu2_intc 0xffffffff>, <&cpu2_intc 9>,
+				<&cpu3_intc 0xffffffff>, <&cpu3_intc 9>,
+				<&cpu4_intc 0xffffffff>, <&cpu4_intc 9>;
 		};
 		prci: clock-controller at 10000000 {
 			compatible = "sifive,fu540-c000-prci";
@@ -170,7 +170,8 @@ dma: dma at 3000000 {
 			compatible = "sifive,fu540-c000-pdma";
 			reg = <0x0 0x3000000 0x0 0x8000>;
 			interrupt-parent = <&plic0>;
-			interrupts = <23 24 25 26 27 28 29 30>;
+			interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>,
+				     <30>;
 			#dma-cells = <1>;
 		};
 		uart1: serial at 10011000 {
@@ -243,7 +244,7 @@ pwm0: pwm at 10020000 {
 			compatible = "sifive,fu540-c000-pwm", "sifive,pwm0";
 			reg = <0x0 0x10020000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
-			interrupts = <42 43 44 45>;
+			interrupts = <42>, <43>, <44>, <45>;
 			clocks = <&prci PRCI_CLK_TLCLK>;
 			#pwm-cells = <3>;
 			status = "disabled";
@@ -252,7 +253,7 @@ pwm1: pwm at 10021000 {
 			compatible = "sifive,fu540-c000-pwm", "sifive,pwm0";
 			reg = <0x0 0x10021000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
-			interrupts = <46 47 48 49>;
+			interrupts = <46>, <47>, <48>, <49>;
 			clocks = <&prci PRCI_CLK_TLCLK>;
 			#pwm-cells = <3>;
 			status = "disabled";
@@ -265,7 +266,7 @@ l2cache: cache-controller at 2010000 {
 			cache-size = <2097152>;
 			cache-unified;
 			interrupt-parent = <&plic0>;
-			interrupts = <1 2 3>;
+			interrupts = <1>, <2>, <3>;
 			reg = <0x0 0x2010000 0x0 0x1000>;
 		};
 		gpio: gpio at 10060000 {
diff --git a/arch/riscv/boot/dts/sifive/fu740-c000.dtsi b/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
index abbb960f90a00ac2..8464b0e3c88791e1 100644
--- a/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
+++ b/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
@@ -147,12 +147,12 @@ plic0: interrupt-controller at c000000 {
 			reg = <0x0 0xc000000 0x0 0x4000000>;
 			riscv,ndev = <69>;
 			interrupt-controller;
-			interrupts-extended = <
-				&cpu0_intc 0xffffffff
-				&cpu1_intc 0xffffffff &cpu1_intc 9
-				&cpu2_intc 0xffffffff &cpu2_intc 9
-				&cpu3_intc 0xffffffff &cpu3_intc 9
-				&cpu4_intc 0xffffffff &cpu4_intc 9>;
+			interrupts-extended =
+				<&cpu0_intc 0xffffffff>,
+				<&cpu1_intc 0xffffffff>, <&cpu1_intc 9>,
+				<&cpu2_intc 0xffffffff>, <&cpu2_intc 9>,
+				<&cpu3_intc 0xffffffff>, <&cpu3_intc 9>,
+				<&cpu4_intc 0xffffffff>, <&cpu4_intc 9>;
 		};
 		prci: clock-controller at 10000000 {
 			compatible = "sifive,fu740-c000-prci";
@@ -273,7 +273,7 @@ ccache: cache-controller at 2010000 {
 			cache-size = <2097152>;
 			cache-unified;
 			interrupt-parent = <&plic0>;
-			interrupts = <19 21 22 20>;
+			interrupts = <19>, <21>, <22>, <20>;
 			reg = <0x0 0x2010000 0x0 0x1000>;
 		};
 		gpio: gpio at 10060000 {
-- 
2.25.1