[PATCH] dt-bindings: gpio: sifive,gpio: Group interrupt tuples

[Geert Uytterhoeven]

To improve human readability and enable automatic validation, the tuples
in "interrupts" properties should be grouped using angle brackets.

Signed-off-by: Geert Uytterhoeven <geert at linux-m68k.org>
---
 Documentation/devicetree/bindings/gpio/sifive,gpio.yaml | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml b/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml
index c2902aac25145205..e04349567eebb72c 100644
--- a/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml
@@ -77,7 +77,8 @@ examples:
       gpio at 10060000 {
         compatible = "sifive,fu540-c000-gpio", "sifive,gpio0";
         interrupt-parent = <&plic>;
-        interrupts = <7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22>;
+        interrupts = <7>, <8>, <9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>,
+                     <17>, <18>, <19>, <20>, <21>, <22>;
         reg = <0x10060000 0x1000>;
         clocks = <&tlclk PRCI_CLK_TLCLK>;
         gpio-controller;
-- 
2.25.1