[PATCH v3 09/16] reset: starfive-jh7100: Add StarFive JH7100 reset driver

[Yury Norov]

On Tue, Nov 2, 2021 at 1:55 PM Yury Norov <yury.norov at gmail.com> wrote:
>
> On Tue, Nov 2, 2021 at 12:59 PM Emil Renner Berthing <kernel at esmil.dk> wrote:
> >
> > On Tue, 2 Nov 2021 at 20:43, Andy Shevchenko <andy.shevchenko at gmail.com> wrote:
> > > +Cc: Yury (bitmap expert)
> > >
> > > On Tue, Nov 2, 2021 at 6:50 PM Emil Renner Berthing <kernel at esmil.dk> wrote:
> > > >
> > > > Add a driver for the StarFive JH7100 reset controller.
> > >
> > > ...
> > >
> > > > +#define BIT_MASK32(x) BIT((x) % 32)
> > >
> > > Possible namespace collision.
> > >
> > > ...
> > >
> > > > +/*
> > > > + * the registers work like a 32bit bitmap, so writing a 1 to the m'th bit of
> > > > + * the n'th ASSERT register asserts line 32n + m, and writing a 0 deasserts the
> > > > + * same line.
>
> We don't have 32-bit bitmaps. Bitmaps are always arrays of unsigned longs. On a
> 64-bit system this '32-bit bitmap' may be broken due to endianness issues.
>
> > > > + * most reset lines have their status inverted so a 0 in the STATUS register
> > > > + * means the line is asserted and a 1 means it's deasserted. a few lines don't
> > > > + * though, so store the expected value of the status registers when all lines
> > > > + * are asserted.
> > > > + */
> > >
> > > Besides missing capitalization,
> >
> > I'm confused. it was you who wanted all comments to capitalized the same..
> > 64bi
> > if it sounds like bitmap, use bitmap.
> > > I have checked DT definitions and it seems you don't even need the
> > > BIT_MASK() macro,
> > >
> > > > +static const u32 jh7100_reset_asserted[4] = {
> > > > +       /* STATUS0 register */
> > > > +       BIT_MASK32(JH7100_RST_U74) |
>
> I think we have no BIT_MASK32() for a good reason. Natural alignment is
> always preferable.
>
> > > > +       BIT_MASK32(JH7100_RST_VP6_DRESET) |
> > > > +       BIT_MASK32(JH7100_RST_VP6_BRESET),
> > > > +       /* STATUS1 register */
> > > > +       BIT_MASK32(JH7100_RST_HIFI4_DRESET) |
> > > > +       BIT_MASK32(JH7100_RST_HIFI4_BRESET),
> > > > +       /* STATUS2 register */
> > > > +       BIT_MASK32(JH7100_RST_E24),
> > > > +       /* STATUS3 register */
> > > > +       0,
> > > > +};
> > >
> > > Yury, do we have any clever (clean) way to initialize a bitmap with
> > > particular bits so that it will be a constant from the beginning? If
> > > no, any suggestion what we can provide to such users?
>
> If you want your array to be a true bitmap, ie, all bitmap functions should
> work with it correctly, you'd initialize it like this:
>
> static const unsigned long jh7100_reset_asserted[] = {
>         BITMAP_FROM_U64(BIT_MASK(JH7100_RST_VP6_DRESET) |
>                           BIT_MASK(JH7100_RST_VP6_BRESET) |
>                           BIT_MASK(JH7100_RST_HIFI4_DRESET) |
>                           BIT_MASK(JH7100_RST_HIFI4_BRESET)),
>         BITMAP_FROM_U64(BIT_MASK(JH7100_RST_E24)),
> }

My bad, it should be BIT_ULL_MASK.

Thanks,
Yury