[PATCH 07/13] dt-bindings: rtc: add bindings for microchip mpfs rtc

[Krzysztof Kozlowski]

On 08/11/2021 16:05, conor.dooley at microchip.com wrote:
> From: Conor Dooley <conor.dooley at microchip.com>
> 
> Add device tree bindings for the real time clock on
> the Microchip PolarFire SoC.
> 
> Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
> Signed-off-by: Daire McNamara <daire.mcnamara at microchip.com>
> ---
>  .../bindings/rtc/microchip,mfps-rtc.yaml      | 61 +++++++++++++++++++
>  1 file changed, 61 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml b/Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml
> new file mode 100644
> index 000000000000..c82b3e7351e0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml
> @@ -0,0 +1,61 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/rtc/microchip,mfps-rtc.yaml#
> +
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Microchip PolarFire Soc (MPFS) RTC Device Tree Bindings
> +
> +allOf:
> +  - $ref: "rtc.yaml#"

No need for quotes.

> +
> +maintainers:
> +  - Daire McNamara <daire.mcnamara at microchip.com>
> +  - Lewis Hanly <lewis.hanly at microchip.com>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - microchip,mpfs-rtc
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  prescaler:
> +    maxItems: 1

You need to describe the type and add description. This does not look
like standard property, so it needs vendor prefix.

> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    items:
> +      - const: rtc
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/microchip,mpfs-clock.h>
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;

Add a blank line before new node. The same in previous examples.

> +        rtc at 20124000 {
> +            compatible = "microchip,mpfs-rtc";
> +            reg = <0 0x20124000 0 0x1000>;
> +            clocks = <&clkcfg CLK_RTC>;
> +            clock-names = "rtc";
> +            interrupts = <80>;
> +        };
> +    };
> +...
> 


Best regards,
Krzysztof