[PATCH 10/13] dt-bindings: spi: add bindings for microchip mpfs spi
conor.dooley at microchip.com
conor.dooley at microchip.com
Mon Nov 8 07:05:51 PST 2021
From: Conor Dooley <conor.dooley at microchip.com>
Add device tree bindings for the {q,}spi controller on
the Microchip PolarFire SoC.
Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
---
.../bindings/spi/microchip,mpfs-spi.yaml | 72 +++++++++++++++++++
1 file changed, 72 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml
diff --git a/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml b/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml
new file mode 100644
index 000000000000..efed145ad029
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/microchip,mpfs-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MPFS {Q,}SPI Controller Device Tree Bindings
+
+maintainers:
+ - Conor Dooley <conor.dooley at microchip.com>
+
+description: |
+ This {Q,}SPI controller is found on the Microchip PolarFire SoC.
+
+allOf:
+ - $ref: "spi-controller.yaml#"
+
+properties:
+ compatible:
+ enum:
+ - microchip,mpfs-spi
+ - microsemi,ms-pf-mss-spi
+ - microchip,mpfs-qspi
+ - microsemi,ms-pf-mss-qspi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clock-names:
+ maxItems: 1
+
+ clocks:
+ maxItems: 2
+
+ num-cs:
+ description: |
+ Number of chip selects used.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 8
+ default: 8
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include "dt-bindings/clock/microchip,mpfs-clock.h"
+ #include "dt-bindings/interrupt-controller/microchip,mpfs-plic.h"
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ spi0: spi at 20108000 {
+ compatible = "microchip,mpfs-spi";
+ reg = <0x0 0x20108000 0x0 0x1000>;
+ clocks = <&clkcfg CLK_SPI0>;
+ interrupt-parent = <&plic>;
+ interrupts = <PLIC_INT_SPI0>;
+ spi-max-frequency = <25000000>;
+ num-cs = <8>;
+ status = "disabled";
+ };
+ };
+...
--
2.33.1
More information about the linux-riscv
mailing list