[PATCH v3 14/16] serial: 8250_dw: Add StarFive JH7100 quirk

[Andy Shevchenko]

On Tue, Nov 2, 2021 at 6:44 PM Emil Renner Berthing <kernel at esmil.dk> wrote:
>
> On the StarFive JH7100 RISC-V SoC the UART core clocks can't be set to
> exactly 16 * 115200Hz and many other common bitrates. Trying this will
> only result in a higher input clock, but low enough that the UART's
> internal divisor can't come close enough to the baud rate target.
> So rather than try to set the input clock it's better to skip the
> clk_set_rate call and rely solely on the UART's internal divisor.

Bingo!
Reviewed-by: Andy Shevchenko <andy.shevchenko at gmail.com>

> Signed-off-by: Emil Renner Berthing <kernel at esmil.dk>
> ---
>  drivers/tty/serial/8250/8250_dw.c | 3 +++
>  1 file changed, 3 insertions(+)
>
> diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
> index 53f57c3b9f42..1769808031c5 100644
> --- a/drivers/tty/serial/8250/8250_dw.c
> +++ b/drivers/tty/serial/8250/8250_dw.c
> @@ -414,6 +414,8 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
>
>                 if (of_device_is_compatible(np, "marvell,armada-38x-uart"))
>                         p->serial_out = dw8250_serial_out38x;
> +               if (of_device_is_compatible(np, "starfive,jh7100-uart"))
> +                       p->set_termios = dw8250_do_set_termios;
>
>         } else if (acpi_dev_present("APMC0D08", NULL, -1)) {
>                 p->iotype = UPIO_MEM32;
> @@ -696,6 +698,7 @@ static const struct of_device_id dw8250_of_match[] = {
>         { .compatible = "cavium,octeon-3860-uart" },
>         { .compatible = "marvell,armada-38x-uart" },
>         { .compatible = "renesas,rzn1-uart" },
> +       { .compatible = "starfive,jh7100-uart" },
>         { /* Sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, dw8250_of_match);
> --
> 2.33.1
>


-- 
With Best Regards,
Andy Shevchenko