[PATCH v2] mm: generalize ZONE_[DMA|DMA32]
Palmer Dabbelt
palmer at dabbelt.com
Sat May 29 16:51:32 PDT 2021
On Fri, 28 May 2021 00:45:57 PDT (-0700), wangkefeng.wang at huawei.com wrote:
> ZONE_[DMA|DMA32] configs have duplicate definitions on platforms
> that subscribe them. Instead, just make them generic options which
> can be selected on applicable platforms.
>
> Also only x86/arm64 architectures could enable both ZONE_DMA and
> ZONE_DMA32 if EXPERT, add ARCH_HAS_ZONE_DMA_SET to make dma zone
> configurable and visible on the two architectures.
>
> Cc: Andrew Morton <akpm at linux-foundation.org>
> Cc: Catalin Marinas <catalin.marinas at arm.com>
> Cc: Will Deacon <will at kernel.org>
> Cc: Geert Uytterhoeven <geert at linux-m68k.org>
> Cc: Thomas Bogendoerfer <tsbogend at alpha.franken.de>
> Cc: "David S. Miller" <davem at davemloft.net>
> Cc: Ingo Molnar <mingo at redhat.com>
> Cc: Borislav Petkov <bp at alien8.de>
> Cc: Palmer Dabbelt <palmer at dabbelt.com>
> Cc: Richard Henderson <rth at twiddle.net>
> Cc: Russell King <linux at armlinux.org.uk>
> Acked-by: Catalin Marinas <catalin.marinas at arm.com> # for arm64
> Acked-by: Geert Uytterhoeven <geert at linux-m68k.org> # for m68k
> Acked-by: Mike Rapoport <rppt at linux.ibm.com>
> Signed-off-by: Kefeng Wang <wangkefeng.wang at huawei.com>
Acked-by: Palmer Dabbelt <palmerdabbelt at google.com> # for RISC-V
> ---
> v2:
> -i386 can't enable ZONE_DMA32, fix it.
> -make ZONE_DMA default y on X86 as before.
> -collect ACKs
>
> arch/alpha/Kconfig | 5 +----
> arch/arm/Kconfig | 3 ---
> arch/arm64/Kconfig | 9 +--------
> arch/ia64/Kconfig | 4 +---
> arch/m68k/Kconfig | 5 +----
> arch/microblaze/Kconfig | 4 +---
> arch/mips/Kconfig | 7 -------
> arch/powerpc/Kconfig | 4 ----
> arch/powerpc/platforms/Kconfig.cputype | 1 +
> arch/riscv/Kconfig | 5 +----
> arch/s390/Kconfig | 4 +---
> arch/sparc/Kconfig | 5 +----
> arch/x86/Kconfig | 15 ++-------------
> mm/Kconfig | 12 ++++++++++++
> 14 files changed, 23 insertions(+), 60 deletions(-)
>
> diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
> index 5998106faa60..6a69a14c4825 100644
> --- a/arch/alpha/Kconfig
> +++ b/arch/alpha/Kconfig
> @@ -40,6 +40,7 @@ config ALPHA
> select MMU_GATHER_NO_RANGE
> select SET_FS
> select SPARSEMEM_EXTREME if SPARSEMEM
> + select ZONE_DMA
> help
> The Alpha is a 64-bit general-purpose processor designed and
> marketed by the Digital Equipment Corporation of blessed memory,
> @@ -65,10 +66,6 @@ config GENERIC_CALIBRATE_DELAY
> bool
> default y
>
> -config ZONE_DMA
> - bool
> - default y
> -
> config GENERIC_ISA_DMA
> bool
> default y
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 24804f11302d..000c3f80b58e 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -218,9 +218,6 @@ config GENERIC_CALIBRATE_DELAY
> config ARCH_MAY_HAVE_PC_FDC
> bool
>
> -config ZONE_DMA
> - bool
> -
> config ARCH_SUPPORTS_UPROBES
> def_bool y
>
> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> index 9f1d8566bbf9..42794474f37f 100644
> --- a/arch/arm64/Kconfig
> +++ b/arch/arm64/Kconfig
> @@ -42,6 +42,7 @@ config ARM64
> select ARCH_HAS_SYSCALL_WRAPPER
> select ARCH_HAS_TEARDOWN_DMA_OPS if IOMMU_SUPPORT
> select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
> + select ARCH_HAS_ZONE_DMA_SET if EXPERT
> select ARCH_HAVE_ELF_PROT
> select ARCH_HAVE_NMI_SAFE_CMPXCHG
> select ARCH_INLINE_READ_LOCK if !PREEMPTION
> @@ -307,14 +308,6 @@ config GENERIC_CSUM
> config GENERIC_CALIBRATE_DELAY
> def_bool y
>
> -config ZONE_DMA
> - bool "Support DMA zone" if EXPERT
> - default y
> -
> -config ZONE_DMA32
> - bool "Support DMA32 zone" if EXPERT
> - default y
> -
> config ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
> def_bool y
>
> diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
> index 279252e3e0f7..fd8503a0088a 100644
> --- a/arch/ia64/Kconfig
> +++ b/arch/ia64/Kconfig
> @@ -60,6 +60,7 @@ config IA64
> select NUMA if !FLATMEM
> select PCI_MSI_ARCH_FALLBACKS if PCI_MSI
> select SET_FS
> + select ZONE_DMA32
> default y
> help
> The Itanium Processor Family is Intel's 64-bit successor to
> @@ -72,9 +73,6 @@ config 64BIT
> select ATA_NONSTANDARD if ATA
> default y
>
> -config ZONE_DMA32
> - def_bool y
> -
> config MMU
> bool
> default y
> diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
> index 372e4e69c43a..05a729c6ad7f 100644
> --- a/arch/m68k/Kconfig
> +++ b/arch/m68k/Kconfig
> @@ -34,6 +34,7 @@ config M68K
> select SET_FS
> select UACCESS_MEMCPY if !MMU
> select VIRT_TO_BUS
> + select ZONE_DMA
>
> config CPU_BIG_ENDIAN
> def_bool y
> @@ -62,10 +63,6 @@ config TIME_LOW_RES
> config NO_IOPORT_MAP
> def_bool y
>
> -config ZONE_DMA
> - bool
> - default y
> -
> config HZ
> int
> default 1000 if CLEOPATRA
> diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
> index 0660f47012bc..14a67a42fcae 100644
> --- a/arch/microblaze/Kconfig
> +++ b/arch/microblaze/Kconfig
> @@ -43,6 +43,7 @@ config MICROBLAZE
> select MMU_GATHER_NO_RANGE
> select SPARSE_IRQ
> select SET_FS
> + select ZONE_DMA
>
> # Endianness selection
> choice
> @@ -60,9 +61,6 @@ config CPU_LITTLE_ENDIAN
>
> endchoice
>
> -config ZONE_DMA
> - def_bool y
> -
> config ARCH_HAS_ILOG2_U32
> def_bool n
>
> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> index ed51970c08e7..430d5324f1af 100644
> --- a/arch/mips/Kconfig
> +++ b/arch/mips/Kconfig
> @@ -3277,13 +3277,6 @@ config I8253
> select CLKSRC_I8253
> select CLKEVT_I8253
> select MIPS_EXTERNAL_TIMER
> -
> -config ZONE_DMA
> - bool
> -
> -config ZONE_DMA32
> - bool
> -
> endmenu
>
> config TRAD_SIGNALS
> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index 088dd2afcfe4..0f78bb383a12 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -403,10 +403,6 @@ config PPC_ADV_DEBUG_DAC_RANGE
> config PPC_DAWR
> bool
>
> -config ZONE_DMA
> - bool
> - default y if PPC_BOOK3E_64
> -
> config PGTABLE_LEVELS
> int
> default 2 if !PPC64
> diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
> index f998e655b570..7d271de8fcbd 100644
> --- a/arch/powerpc/platforms/Kconfig.cputype
> +++ b/arch/powerpc/platforms/Kconfig.cputype
> @@ -111,6 +111,7 @@ config PPC_BOOK3E_64
> select PPC_FPU # Make it a choice ?
> select PPC_SMP_MUXED_IPI
> select PPC_DOORBELL
> + select ZONE_DMA
>
> endchoice
>
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index a8ad8eb76120..d29643dee126 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -103,6 +103,7 @@ config RISCV
> select SYSCTL_EXCEPTION_TRACE
> select THREAD_INFO_IN_TASK
> select UACCESS_MEMCPY if !MMU
> + select ZONE_DMA32 if 64BIT
>
> config ARCH_MMAP_RND_BITS_MIN
> default 18 if 64BIT
> @@ -132,10 +133,6 @@ config MMU
> Select if you want MMU-based virtualised addressing space
> support by paged memory management. If unsure, say 'Y'.
>
> -config ZONE_DMA32
> - bool
> - default y if 64BIT
> -
> config VA_BITS
> int
> default 32 if 32BIT
> diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
> index b4c7c34069f8..daab9d56957a 100644
> --- a/arch/s390/Kconfig
> +++ b/arch/s390/Kconfig
> @@ -2,9 +2,6 @@
> config MMU
> def_bool y
>
> -config ZONE_DMA
> - def_bool y
> -
> config CPU_BIG_ENDIAN
> def_bool y
>
> @@ -210,6 +207,7 @@ config S390
> select THREAD_INFO_IN_TASK
> select TTY
> select VIRT_CPU_ACCOUNTING
> + select ZONE_DMA
> # Note: keep the above list sorted alphabetically
>
> config SCHED_OMIT_FRAME_POINTER
> diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
> index 164a5254c91c..39679664cc9a 100644
> --- a/arch/sparc/Kconfig
> +++ b/arch/sparc/Kconfig
> @@ -59,6 +59,7 @@ config SPARC32
> select CLZ_TAB
> select HAVE_UID16
> select OLD_SIGACTION
> + select ZONE_DMA
>
> config SPARC64
> def_bool 64BIT
> @@ -141,10 +142,6 @@ config HIGHMEM
> default y if SPARC32
> select KMAP_LOCAL
>
> -config ZONE_DMA
> - bool
> - default y if SPARC32
> -
> config GENERIC_ISA_DMA
> bool
> default y if SPARC32
> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index 0045e1b44190..11cf8a0d6800 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -33,6 +33,7 @@ config X86_64
> select NEED_DMA_MAP_STATE
> select SWIOTLB
> select ARCH_HAS_ELFCORE_COMPAT
> + select ZONE_DMA32
>
> config FORCE_DYNAMIC_FTRACE
> def_bool y
> @@ -93,6 +94,7 @@ config X86
> select ARCH_HAS_SYSCALL_WRAPPER
> select ARCH_HAS_UBSAN_SANITIZE_ALL
> select ARCH_HAS_DEBUG_WX
> + select ARCH_HAS_ZONE_DMA_SET if EXPERT
> select ARCH_HAVE_NMI_SAFE_CMPXCHG
> select ARCH_MIGHT_HAVE_ACPI_PDC if ACPI
> select ARCH_MIGHT_HAVE_PC_PARPORT
> @@ -343,9 +345,6 @@ config ARCH_SUSPEND_POSSIBLE
> config ARCH_WANT_GENERAL_HUGETLB
> def_bool y
>
> -config ZONE_DMA32
> - def_bool y if X86_64
> -
> config AUDIT_ARCH
> def_bool y if X86_64
>
> @@ -393,16 +392,6 @@ config CC_HAS_SANE_STACKPROTECTOR
>
> menu "Processor type and features"
>
> -config ZONE_DMA
> - bool "DMA memory allocation support" if EXPERT
> - default y
> - help
> - DMA memory allocation support allows devices with less than 32-bit
> - addressing to allocate within the first 16MB of address space.
> - Disable if no such devices will be used.
> -
> - If unsure, say Y.
> -
> config SMP
> bool "Symmetric multi-processing support"
> help
> diff --git a/mm/Kconfig b/mm/Kconfig
> index 02d44e3420f5..16930f40f293 100644
> --- a/mm/Kconfig
> +++ b/mm/Kconfig
> @@ -789,6 +789,18 @@ config ARCH_HAS_CACHE_LINE_SIZE
> config ARCH_HAS_PTE_DEVMAP
> bool
>
> +config ARCH_HAS_ZONE_DMA_SET
> + bool
> +
> +config ZONE_DMA
> + bool "Support DMA zone" if ARCH_HAS_ZONE_DMA_SET
> + default y if ARM64 || X86
> +
> +config ZONE_DMA32
> + bool "Support DMA32 zone" if ARCH_HAS_ZONE_DMA_SET
> + depends on !X86_32
> + default y if ARM64
> +
> config ZONE_DEVICE
> bool "Device memory (pmem, HMM, etc...) hotplug support"
> depends on MEMORY_HOTPLUG
More information about the linux-riscv
mailing list