[PATCH v2 4/6] dt-bindings: PCI: Add SiFive FU740 PCIe host controller

[Greentime Hu]

Rob Herring <robh at kernel.org> 於 2021年3月24日 週三 上午4:35寫道：
>
> On Thu, Mar 18, 2021 at 02:08:11PM +0800, Greentime Hu wrote:
> > Add PCIe host controller DT bindings of SiFive FU740.
> >
> > Signed-off-by: Greentime Hu <greentime.hu at sifive.com>
> > ---
> >  .../bindings/pci/sifive,fu740-pcie.yaml       | 119 ++++++++++++++++++
> >  1 file changed, 119 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
[...]
> > +examples:
> > +  - |
> > +    pcie at e00000000 {
> > +        #address-cells = <3>;
> > +        #interrupt-cells = <1>;
> > +        #size-cells = <2>;
> > +        compatible = "sifive,fu740-pcie";
> > +        reg = <0xe 0x00000000 0x1 0x0
>
> Humm, 4GB for DBI space? The DWC controller doesn't have that much
> space, and the kernel will map *all* of that. That's not an
> insignificant amount of memory just for page tables.

Thank you for review and point this out. :)

I check the spec description for DBI in DWC_pcie_ctl_dm_databook.pdf
section 3.15 3.16 and table 3-17.

I think CX_SRIOV_ENABLE and CX_ARI_ENABLE will be set to 0 because
these 2 are endpoint mode features.
Single Root I/O Virtualization (SR-IOV) This section describes the
SR-IOV features implemented in EP mode. The parameter for enabling
SR-IOV is CX_SRIOV_ENABLE
Alternative Routing-ID Interpretation (ARI) ARI allows an endpoint to
support more than eight physical functions (PFs). ARI is enabled by
the CX_ARI_ENABLE parameter.

So based on Table 3-17, we will need to map 2GB(bit30) instead of 4GB(bit31).