[PATCH RFC 0/3] riscv: Add DMA_COHERENT support

Guo Ren guoren at kernel.org
Sun Jun 6 22:13:37 PDT 2021 

:


On Mon, Jun 7, 2021 at 12:47 PM Anup Patel <Anup.Patel at wdc.com> wrote:
>
>
>
> > -----Original Message-----
> > From: Guo Ren <guoren at kernel.org>
> > Sent: 07 June 2021 09:52
> > To: Anup Patel <Anup.Patel at wdc.com>
> > Cc: Atish Patra <atishp at atishpatra.org>; Palmer Dabbelt
> > <palmer at dabbelt.com>; anup at brainfault.org; drew at beagleboard.org;
> > Christoph Hellwig <hch at lst.de>; wefu at redhat.com; lazyparser at gmail.com;
> > linux-riscv at lists.infradead.org; linux-kernel at vger.kernel.org; linux-
> > arch at vger.kernel.org; linux-sunxi at lists.linux.dev; guoren at linux.alibaba.com;
> > Paul Walmsley <paul.walmsley at sifive.com>
> > Subject: Re: [PATCH RFC 0/3] riscv: Add DMA_COHERENT support
> >
> > Hi Anup,
> >
> > On Mon, Jun 7, 2021 at 11:38 AM Anup Patel <Anup.Patel at wdc.com> wrote:
> > >
> > >
> > >
> > > > -----Original Message-----
> > > > From: Guo Ren <guoren at kernel.org>
> > > > Sent: 06 June 2021 22:42
> > > > To: Anup Patel <Anup.Patel at wdc.com>; Atish Patra
> > > > <atishp at atishpatra.org>
> > > > Cc: Palmer Dabbelt <palmer at dabbelt.com>; anup at brainfault.org;
> > > > drew at beagleboard.org; Christoph Hellwig <hch at lst.de>;
> > > > wefu at redhat.com; lazyparser at gmail.com;
> > > > linux-riscv at lists.infradead.org; linux- kernel at vger.kernel.org;
> > > > linux-arch at vger.kernel.org; linux- sunxi at lists.linux.dev;
> > > > guoren at linux.alibaba.com; Paul Walmsley <paul.walmsley at sifive.com>
> > > > Subject: Re: [PATCH RFC 0/3] riscv: Add DMA_COHERENT support
> > > >
> > > > Hi Anup and Atish,
> > > >
> > > > On Thu, Jun 3, 2021 at 2:00 PM Anup Patel <Anup.Patel at wdc.com>
> > wrote:
> > > > >
> > > > >
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: Palmer Dabbelt <palmer at dabbelt.com>
> > > > > > Sent: 03 June 2021 09:43
> > > > > > To: guoren at kernel.org
> > > > > > Cc: anup at brainfault.org; drew at beagleboard.org; Christoph Hellwig
> > > > > > <hch at lst.de>; Anup Patel <Anup.Patel at wdc.com>;
> > wefu at redhat.com;
> > > > > > lazyparser at gmail.com; linux-riscv at lists.infradead.org; linux-
> > > > > > kernel at vger.kernel.org; linux-arch at vger.kernel.org; linux-
> > > > > > sunxi at lists.linux.dev; guoren at linux.alibaba.com; Paul Walmsley
> > > > > > <paul.walmsley at sifive.com>
> > > > > > Subject: Re: [PATCH RFC 0/3] riscv: Add DMA_COHERENT support
> > > > > >
> > > > > > On Sat, 29 May 2021 17:30:18 PDT (-0700), Palmer Dabbelt wrote:
> > > > > > > On Fri, 21 May 2021 17:36:08 PDT (-0700), guoren at kernel.org
> > wrote:
> > > > > > >> On Wed, May 19, 2021 at 3:15 PM Anup Patel
> > > > > > >> <anup at brainfault.org>
> > > > > > wrote:
> > > > > > >>>
> > > > > > >>> On Wed, May 19, 2021 at 12:24 PM Drew Fustini
> > > > > > <drew at beagleboard.org> wrote:
> > > > > > >>> >
> > > > > > >>> > On Wed, May 19, 2021 at 08:06:17AM +0200, Christoph
> > > > > > >>> > Hellwig
> > > > > > wrote:
> > > > > > >>> > > On Wed, May 19, 2021 at 02:05:00PM +0800, Guo Ren
> > wrote:
> > > > > > >>> > > > Since the existing RISC-V ISA cannot solve this
> > > > > > >>> > > > problem, it is better to provide some configuration
> > > > > > >>> > > > for the SOC vendor to
> > > > > > customize.
> > > > > > >>> > >
> > > > > > >>> > > We've been talking about this problem for close to five years.
> > > > > > >>> > > So no, if you don't manage to get the feature into the
> > > > > > >>> > > ISA it can't be supported.
> > > > > > >>> >
> > > > > > >>> > Isn't it a good goal for Linux to support the capabilities
> > > > > > >>> > present in the SoC that a currently being fab'd?
> > > > > > >>> >
> > > > > > >>> > I believe the CMO group only started last year [1] so the
> > > > > > >>> > RV64GC SoCs that are going into mass production this year
> > > > > > >>> > would not have had the opporuntiy of utilizing any RISC-V
> > > > > > >>> > ISA extension for handling cache management.
> > > > > > >>>
> > > > > > >>> The current Linux RISC-V policy is to only accept patches
> > > > > > >>> for frozen or ratified ISA specs.
> > > > > > >>> (Refer, Documentation/riscv/patch-acceptance.rst)
> > > > > > >>>
> > > > > > >>> This means even if emulate CMO instructions in OpenSBI, the
> > > > > > >>> Linux patches won't be taken by Palmer because CMO
> > > > > > >>> specification is still in draft stage.
> > > > > > >> Before CMO specification release, could we use a sbi_ecall to
> > > > > > >> solve the current problem? This is not against the
> > > > > > >> specification, when CMO is ready we could let users choose to
> > > > > > >> use the new CMO in
> > > > Linux.
> > > > > > >>
> > > > > > >> From a tech view, CMO trap emulation is the same as sbi_ecall.
> > > > > > >>
> > > > > > >>>
> > > > > > >>> Also, we all know how much time it takes for RISCV
> > > > > > >>> international to freeze some spec. Judging by that we are
> > > > > > >>> looking at another
> > > > > > >>> 3-4 years at minimum.
> > > > > > >
> > > > > > > Sorry for being slow here, this thread got buried.
> > > > > > >
> > > > > > > I've been trying to work with a handful of folks at the RISC-V
> > > > > > > foundation to try and get a subset of the various
> > > > > > > in-development specifications (some simple CMOs, something
> > > > > > > about non-caching in the page tables, and some way to prevent
> > > > > > > speculative accesse from generating coherence traffic that will break
> > non-coherent systems).
> > > > > > > I'm not sure we can get this together quickly, but I'd prefer
> > > > > > > to at least try before we jump to taking vendor-specificed behavior
> > here.
> > > > > > > It's obviously an up-hill battle to try and get specifications
> > > > > > > through the process and I'm certainly not going to promise it
> > > > > > > will work, but I'm hoping that the impending need to avoid
> > > > > > > forking the ISA will be sufficient to get people behind
> > > > > > > producing some specifications in a timely
> > > > > > fashion.
> > > > > > >
> > > > > > > I wasn't aware than this chip had non-coherent devices until I
> > > > > > > saw this thread, so we'd been mostly focused on the Beagle V chip.
> > > > > > > That was in a sense an easier problem because the SiFive IP in
> > > > > > > it was never designed to have non-coherent devices so we'd
> > > > > > > have to make anything work via a series of slow workarounds,
> > > > > > > which would make emulating the eventually standardized
> > > > > > > behavior reasonable in terms of performance (ie, everything
> > > > > > > would be super slow so who really
> > > > cares).
> > > > > > >
> > > > > > > I don't think relying on some sort of SBI call for the CMOs
> > > > > > > whould be such a performance hit that it would prevent these
> > > > > > > systems from being viable, but assuming you have reasonable
> > > > > > > performance on your non-cached accesses then that's probably
> > > > > > > not going to be viable to trap and emulate.  At that point it
> > > > > > > really just becomes silly to pretend that we're still making
> > > > > > > things work by emulating the eventually ratified behavior, as
> > > > > > > anyone who actually tries to use this thing to do IO would
> > > > > > > need out of tree patches.  I'm not sure exactly what the plan
> > > > > > > is for the page table bits in the specification right now, but
> > > > > > > if you can give me a pointer to some documentation then I'm
> > > > > > > happy to try and push for something
> > > > compatible.
> > > > > > >
> > > > > > > If we can't make the process work at the foundation then I'd
> > > > > > > be strongly in favor of just biting the bullet and starting to
> > > > > > > take vendor-specific code that's been implemented in hardware
> > > > > > > and is necessarry to make things work acceptably.  That's
> > > > > > > obviously a sub-optimal solution as it'll lead to a bunch of
> > > > > > > ISA fragmentation, but at least we'll be able to keep the
> > > > > > > software stack
> > > > together.
> > > > > > >
> > > > > > > Can you tell us when these will be in the hands of users?
> > > > > > > That's pretty important here, as I don't want to be blocking
> > > > > > > real users from having their hardware work.  IIRC there were
> > > > > > > some plans to distribute early boards, but it looks like the
> > > > > > > foundation got involved and I guess I lost the thread at that point.
> > > > > > >
> > > > > > > Sorry this is all such a headache, but hopefully we can get
> > > > > > > things sorted out.
> > > > > >
> > > > > > I talked with some of the RISC-V foundation folks, we're not
> > > > > > going to have an ISA specification for the non-coherent stuff
> > > > > > any time soon.  I took a look at this code and I definately
> > > > > > don't want to take it as is, but I'm not opposed to taking
> > > > > > something that makes the
> > > > hardware work as long as it's a lot cleaner.
> > > > > > We've already got two of these non-coherent chips, I'm sure more
> > > > > > will come, and I'd rather have the extra headaches than make
> > > > > > everyone fork the software stack.
> > > > >
> > > > > Thanks for confirming. The CMO extension is still in early stages
> > > > > so it will certainly take more time for them. After CMO extension
> > > > > is finalized, it will take some more time to have actual RISC-V
> > > > > platforms with
> > > > CMO implemented.
> > > > >
> > > > > >
> > > > > > After talking to Atish it looks like there's likely to be an SBI
> > > > > > extension to handle the CMOs, which should let us avoid the bulk
> > > > > > of the vendor-specific behavior in the kernel.  I know some
> > > > > > people are worried about adding to the SBI surface.  I'm worried
> > > > > > about that too, but that's way better than sticking a bunch of
> > > > > > vendor-specific instructions into the kernel.  The SBI extension
> > > > > > should make for a straight-forward cache flush implementation in
> > > > > > Linux, so let's just plan on
> > > > that getting through quickly (as has been done before).
> > > > >
> > > > > Yes, I agree. We can have just a single SBI call which is meant
> > > > > for DMA sync purpose only which means it will flush/invalidate
> > > > > pages from all cache levels irrespective of the cache hierarchy (i.e.
> > > > > flush/invalidate to RAM). The CMO extension might more generic
> > > > > cache operations which can target any cache level.
> > > > >
> > > > > I am already preparing a write-up for SBI DMA sync call in SBI
> > > > > spec. I will share it with you separately as well.
> > > > >
> > > > > >
> > > > > > Unfortunately we've yet to come up with a way to handle the
> > > > > > non-cacheable mappings without introducing a degree of
> > > > > > vendor-specific behavior or seriously impacting performance
> > > > > > (mark them as not valid and deal with them in the trap handler).
> > > > > > I'm not really sure it counts as supporting the hardware if it's
> > > > > > massively slow, so that really leaves us with vendor-specific
> > > > > > mappings as the only
> > > > option to make these chips work.
> > > > >
> > > > > A RISC-V platform can have non-cacheable mappings is following
> > > > > possible
> > > > > ways:
> > > > > 1) Fixed physical address range as non-cacheable using PMAs
> > > > > 2) Custom page table attributes
> > > > > 3) Svpmbt extension being defined by RVI
> > > > >
> > > > > Atish and me both think it is possible to have RISC-V specific DMA
> > > > > ops implementation which can handle all above case. Atish is
> > > > > already working on DMA ops implementation for RISC-V.
> > > > Not only DMA ops, but also icache_sync & __vdso_icache_sync. Please
> > > > have a look at:
> > > > https://lore.kernel.org/linux-riscv/1622970249-50770-12-git-send-ema
> > > > il-
> > > > guoren at kernel.org/T/#u
> > >
> > > The icache_sync and __vdso_icache_sync will have to be addressed
> > > differently. The SBI DMA sync extension cannot address this.
> > Agree
> >
> > >
> > > It seems Allwinner D1 have more non-standard stuff:
> > > 1) Custom PTE bits for IO-coherent access
> > > 2) Custom data cache flush/invalidate for DMA sync
> > > 3) Custom icache flush/invalidate
> > Yes, but 3) is a performance optimization, not critical for running.
> >
> > >
> > > Other hand, BeagleV has only two problems:
> > > 1) Custom physical address range for IO-coherent access
> > > 2) Custom L2 cache flush/invalidate for DMA sync
> > https://github.com/starfive-
> > tech/linux/commit/d4c4044c08134dca8e5eaaeb6d3faf97dc453b6d
> >
> > Currently, they still use DMA sync with DMA descriptor, are you sure they
> > have minor memory physical address.
> >
> > >
> > > From above #2, can be solved by SBI DMA sync call and Linux DMA ops
> > > for both BeagleV and Allwinner D1
> > >
> > > On BeagleV, issue #1 can be solved using "dma-ranges".
> > >
> > > On Allwinner D1, issues #1 and #3 need to be addressed separately.
> > >
> > > I think supporting BeagleV in upstream Linux is relatively easy
> > > compared to Allwinner D1.
> > >
> > > @Guo, please check if you can reserve dedicated physical address range
> > > for IO-coherent access (just like BeagleV). If yes, then we can tackle
> > > issue #1 for Allwinner
> > > D1 using "dma-ranges" DT property.
> > There is no dedicated physical address range for IO-coherent access in D1. But
> > the solution you mentioned couldn't solve all requirements.
> > Only one mirror physical address range is not enough, we need at least three
> > (Normal, DMA desc, frame buffer).
>
> How many non-coherent devices you really have?
>
> I am guess lot of critical devices on Allwinner D1 are not coherent with CPU.
> The problem for Allwinner D1 is even worst than I thought. If such critical
> high through-put devices are not cache coherent with CPU then I am
> speechless about Allwinner D1 situation.
>
> > And that will triple the memory physical address which can't be accepted by
> > our users from the hardware design cost view.
> >
> >  "dma-ranges" DT property is a big early MIPS smell. ARM SOC users can't
> > accept it. (They just say replace the CPU, but don't touch anything other.)
> >
> > PTE attributes are the non-coherent solution for many years. MIPS also
> > follows that now:
> > ref arch/mips/include/asm/pgtable-bits.h &
> > arch/mips/include/asm/pgtable.h
>
> RISC-V is in the process of standardizing Svpmbt extension.
>
> Unfortunately, the higher order bits which your implementation uses is
> not for SoC vendor use as-per the RISC-V privilege spec.
>
> >
> > #ifndef _CACHE_CACHABLE_NO_WA
> > #define _CACHE_CACHABLE_NO_WA           (0<<_CACHE_SHIFT)
> > #endif
> > #ifndef _CACHE_CACHABLE_WA
> > #define _CACHE_CACHABLE_WA              (1<<_CACHE_SHIFT)
> > #endif
> > #ifndef _CACHE_UNCACHED
> > #define _CACHE_UNCACHED                 (2<<_CACHE_SHIFT)
> > #endif
> > #ifndef _CACHE_CACHABLE_NONCOHERENT
> > #define _CACHE_CACHABLE_NONCOHERENT     (3<<_CACHE_SHIFT)
> > #endif
> > #ifndef _CACHE_CACHABLE_CE
> > #define _CACHE_CACHABLE_CE              (4<<_CACHE_SHIFT)
> > #endif
> > #ifndef _CACHE_CACHABLE_COW
> > #define _CACHE_CACHABLE_COW             (5<<_CACHE_SHIFT)
> > #endif
> > #ifndef _CACHE_CACHABLE_CUW
> > #define _CACHE_CACHABLE_CUW             (6<<_CACHE_SHIFT)
> > #endif
> > #ifndef _CACHE_UNCACHED_ACCELERATED
> > #define _CACHE_UNCACHED_ACCELERATED     (7<<_CACHE_SHIFT)
> >
> > We can't force our users to double/triplicate their physical memory regions.
>
> We are trying to find a workable solution here so that we don't have
> to deal with custom PTE attributes which are reserved for RISC-V priv
> specification only.
How do think about my new patch of custom PTE attributes?
https://lore.kernel.org/linux-riscv/610849b6f66e8d5a9653c9f62f46c48d@mailhost.ics.forth.gr/T/#mdc0dacba57346b5ac59a01961495c132b93cfcdb

>
> Regards,
> Anup
>
> >
> > >
> > > Regards,
> > > Anup
> > >
> > > >
> > > >
> > > > >
> > > > > >
> > > > > > This implementation, which adds some Kconfig entries that
> > > > > > control page table bits, definately isn't suitable for upstream.
> > > > > > Allowing users to set arbitrary page table bits will eventually
> > > > > > conflict with the standard, and is just going to be a mess.
> > > > > > It'll also lead to kernels that are only compatible with
> > > > > > specific designs, which we're trying very hard to avoid.  At a
> > > > > > bare minimum we'll need some way to detect systems with these
> > > > > > page table bits before setting them, and some description of
> > > > > > what the bits actually do so we can reason about
> > > > them.
> > > > >
> > > > > Yes, vendor specific Kconfig options are strict NO NO. We can't
> > > > > give-up the goal of unified kernel image for all platforms.
> > > > >
> > > > > Regards,
> > > > > Anup
> > > >
> > > >
> > > >
> > > > --
> > > > Best Regards
> > > >  Guo Ren
> > > >
> > > > ML: https://lore.kernel.org/linux-csky/
> >
> >
> >
> > --
> > Best Regards
> >  Guo Ren
> >
> > ML: https://lore.kernel.org/linux-csky/



-- 
Best Regards
 Guo Ren

ML: https://lore.kernel.org/linux-csky/

More information about the linux-riscv mailing list