[RFC PATCH v2 00/11] riscv: Add DMA_COHERENT support for Allwinner D1
Guo Ren
guoren at kernel.org
Sun Jun 6 21:36:07 PDT 2021
Hi Anup,
On Mon, Jun 7, 2021 at 11:44 AM Anup Patel <Anup.Patel at wdc.com> wrote:
>
>
>
> > -----Original Message-----
> > From: guoren at kernel.org <guoren at kernel.org>
> > Sent: 06 June 2021 14:34
> > To: guoren at kernel.org; Anup Patel <Anup.Patel at wdc.com>;
> > palmerdabbelt at google.com; arnd at arndb.de; wens at csie.org;
> > maxime at cerno.tech; drew at beagleboard.org; liush at allwinnertech.com;
> > lazyparser at gmail.com; wefu at redhat.com
> > Cc: linux-riscv at lists.infradead.org; linux-kernel at vger.kernel.org; linux-
> > arch at vger.kernel.org; linux-sunxi at lists.linux.dev; Guo Ren
> > <guoren at linux.alibaba.com>
> > Subject: [RFC PATCH v2 00/11] riscv: Add DMA_COHERENT support for
> > Allwinner D1
> >
> > From: Guo Ren <guoren at linux.alibaba.com>
> >
> > The RISC-V ISA doesn't yet specify how to query or modify PMAs, so let
> > vendors define the custom properties of memory regions in PTE.
> >
> > This patchset helps SOC vendors to support their own custom interconnect
> > coherent solution with PTE attributes.
> >
> > For example, allwinner D1[1] uses T-HEAD C906 as main processor, C906 has
> > two modes in MMU:
> > - Compatible mode, the same as the definitions in spec.
> > - Enhanced mode, add custom DMA_COHERENT attribute bits in PTE which
> > not mentioned in spec.
> >
> > Allwinner D1 needs the enhanced mode to support the DMA type device with
> > non-coherent interconnect in its SOC. C906 uses BITS(63 - 59) as custom
> > attribute bits in PTE.
> >
> > The patchset contain 4 parts (asid, pgtable, cmo, soc) which have been tested
> > on D1:
> > - asid: T-HEAD C906 of D1 contains full asid hw facilities which has no
> > conflict with RISC-V spec, and hope these patches soon could be
> > approved.
> > - pgtable: Using a image-hdr to pass vendor specific information and
> > setup custom PTE attributes in a global struct variable during boot
> > stage. Also it needs define custom protection_map in linux/mm.
> > - cmo: We need deal with dma_sync & icache_sync & __vdso_icache_sync.
> > In this patchset, I just show you how T-HEAD C9xx work, and seems Atish
> > is working for the DMA infrustructure, please let me know the idea.
> > - soc: Add allwinner gmac driver & dts & Kconfig for sunxi test.
> >
> > The patchset could work with linux-5.13-rc4, here is the steps for D1:
> > - Download linux-5.13-rc4 and apply the patchset
> > - make ARCH=riscv CROSS_COMPILE=riscv64-linux- defconfig
> > - make ARCH=riscv CROSS_COMPILE=riscv64-linux- Image modules dtbs
> > - mkimage -A riscv -O linux -T kernel -C none -a 0x00200000 -e 0x00200000 -
> > n Linux -d arch/riscv/boot/Image uImage
> > - Download newest opensbi [2], build with [3], and get fw_dynamic.bin
> > - Copy uImage, fw_dynamic.bin, allwinner-d1-nezha-kit.dtb into boot
> > partition of TF card.
> > - Plugin the TF card and power on D1.
> >
> > Link: https://linux-sunxi.org/D1 [1]
> > Link: https://github.com/riscv/opensbi branch:master [2]
> > Link: https://github.com/riscv/opensbi/blob/master/docs/platform/thead-
> > c9xx.md [3]
> >
> > Changes since v1:
> > - Rebase on linux-5.13-rc4
> > - Support defconfig for different PTE attributes
> > - Support C906 icache_sync
> > - Add Allwinner D1 dts & Kconfig & gmac for testing
> > - Add asid optimization for D1 usage
> >
> > Guo Ren (10):
> > riscv: asid: Use global mappings for kernel pages
> > riscv: asid: Add ASID-based tlbflushing methods
> > riscv: asid: Optimize tlbflush coding convention
> > riscv: pgtable: Fixup _PAGE_CHG_MASK usage
> > riscv: pgtable: Add custom protection_map init
> > riscv: pgtable: Add DMA_COHERENT with custom PTE attributes
> > riscv: cmo: Add dma-noncoherency support
> > riscv: cmo: Add vendor custom icache sync
> > riscv: soc: Initial DTS for Allwinner D1 NeZha board
> > riscv: soc: Add Allwinner SoC kconfig option
>
> The series cover letter says DMA_COHERENT support but
> it is doing lot of stuff not related to DMA.
>
> Please keep the first three patches separate. They belong
> to your ASID series.
I just want to give out a whole view of how allwinner D1 works, which
could help soc folks run their mini system.
Christoph Hellwig has helped to update the ASID series, and I've given
the tested-by on my hardware 4*910 SMP & 906 D1
https://lore.kernel.org/linux-riscv/20210606152050.636038-1-hch@lst.de/T/#t
Ok, you won't see it in the next version patchset.
>
> I also dislike the fact that you are continuously sending
> SBI DMA sync patches without any discussion on the
> UnixPlatform mailing list for SBI spec changes.
SBI DMA sync is not critical for us, I could follow your definition
when you are ready. Even CBO trap emulation is okay for me.
>
> Regards,
> Anup
>
> >
> > liush (1):
> > riscv: soc: Allwinner D1 GMAC driver only for temp use
> >
> > arch/riscv/Kconfig | 9 +
> > arch/riscv/Kconfig.socs | 12 +
> > arch/riscv/boot/dts/Makefile | 1 +
> > arch/riscv/boot/dts/allwinner/Makefile | 2 +
> > .../boot/dts/allwinner/allwinner-d1-nezha-kit.dts | 29 +
> > arch/riscv/boot/dts/allwinner/allwinner-d1.dtsi | 100 +
> > arch/riscv/configs/defconfig | 1 +
> > arch/riscv/include/asm/cacheflush.h | 48 +-
> > arch/riscv/include/asm/mmu_context.h | 2 +
> > arch/riscv/include/asm/pgtable-64.h | 8 +-
> > arch/riscv/include/asm/pgtable-bits.h | 20 +-
> > arch/riscv/include/asm/pgtable.h | 44 +-
> > arch/riscv/include/asm/sbi.h | 15 +
> > arch/riscv/include/asm/soc.h | 1 +
> > arch/riscv/include/asm/tlbflush.h | 22 +
> > arch/riscv/include/asm/vendorid_list.h | 1 +
> > arch/riscv/kernel/sbi.c | 19 +
> > arch/riscv/kernel/soc.c | 22 +
> > arch/riscv/kernel/vdso/flush_icache.S | 33 +-
> > arch/riscv/mm/Makefile | 1 +
> > arch/riscv/mm/cacheflush.c | 3 +-
> > arch/riscv/mm/context.c | 2 +-
> > arch/riscv/mm/dma-mapping.c | 53 +
> > arch/riscv/mm/init.c | 26 +
> > arch/riscv/mm/tlbflush.c | 57 +-
> > drivers/net/ethernet/Kconfig | 1 +
> > drivers/net/ethernet/Makefile | 1 +
> > drivers/net/ethernet/allwinnertmp/Kconfig | 17 +
> > drivers/net/ethernet/allwinnertmp/Makefile | 7 +
> > drivers/net/ethernet/allwinnertmp/sunxi-gmac-ops.c | 690 ++++++
> > drivers/net/ethernet/allwinnertmp/sunxi-gmac.c | 2240
> > ++++++++++++++++++++
> > drivers/net/ethernet/allwinnertmp/sunxi-gmac.h | 258 +++
> > drivers/net/phy/realtek.c | 2 +-
> > mm/mmap.c | 4 +
> > 34 files changed, 3714 insertions(+), 37 deletions(-) create mode 100644
> > arch/riscv/boot/dts/allwinner/Makefile
> > create mode 100644 arch/riscv/boot/dts/allwinner/allwinner-d1-nezha-
> > kit.dts
> > create mode 100644 arch/riscv/boot/dts/allwinner/allwinner-d1.dtsi
> > create mode 100644 arch/riscv/mm/dma-mapping.c create mode 100644
> > drivers/net/ethernet/allwinnertmp/Kconfig
> > create mode 100644 drivers/net/ethernet/allwinnertmp/Makefile
> > create mode 100644 drivers/net/ethernet/allwinnertmp/sunxi-gmac-ops.c
> > create mode 100644 drivers/net/ethernet/allwinnertmp/sunxi-gmac.c
> > create mode 100644 drivers/net/ethernet/allwinnertmp/sunxi-gmac.h
> >
> > --
> > 2.7.4
>
--
Best Regards
Guo Ren
ML: https://lore.kernel.org/linux-csky/
More information about the linux-riscv
mailing list