[PATCH] riscv: mm: init: Consolidate vars, functions
Jisheng Zhang
jszhang3 at mail.ustc.edu.cn
Wed Jun 2 17:27:14 PDT 2021
On Wed, 2 Jun 2021 12:54:40 -0700
Nathan Chancellor <nathan at kernel.org> wrote:
> On Wed, Jun 02, 2021 at 11:58:51PM +0800, Jisheng Zhang wrote:
> > On Wed, 2 Jun 2021 23:12:26 +0800
> > Jisheng Zhang <jszhang3 at mail.ustc.edu.cn> wrote:
> >
> > > On Tue, 1 Jun 2021 13:21:05 -0700
> > > Nathan Chancellor <nathan at kernel.org> wrote:
> > >
> > > > Hi Jisheng,
> > >
> > > Hi Nathan,
> > >
> > > >
> > > > On Sun, May 16, 2021 at 09:15:56PM +0800, Jisheng Zhang wrote:
> > > > > From: Jisheng Zhang <jszhang at kernel.org>
> > > > >
> > > > > Consolidate the following items in init.c
> > > > >
> > > > > Staticize global vars as much as possible;
> > > > > Add __initdata mark if the global var isn't needed after init
> > > > > Add __init mark if the func isn't needed after init
> > > > > Add __ro_after_init if the global var is read only after init
> > > > >
> > > > > Signed-off-by: Jisheng Zhang <jszhang at kernel.org>
> > > > > ---
> > > > > arch/riscv/include/asm/set_memory.h | 2 +-
> > > > > arch/riscv/mm/init.c | 36 +++++++++++++++--------------
> > > > > 2 files changed, 20 insertions(+), 18 deletions(-)
> > > > >
> > > > > diff --git a/arch/riscv/include/asm/set_memory.h b/arch/riscv/include/asm/set_memory.h
> > > > > index 086f757e8ba3..9d4d455726d4 100644
> > > > > --- a/arch/riscv/include/asm/set_memory.h
> > > > > +++ b/arch/riscv/include/asm/set_memory.h
> > > > > @@ -27,7 +27,7 @@ static inline int set_memory_rw_nx(unsigned long addr, int numpages) { return 0;
> > > > > #endif
> > > > >
> > > > > #if defined(CONFIG_64BIT) && defined(CONFIG_STRICT_KERNEL_RWX)
> > > > > -void protect_kernel_linear_mapping_text_rodata(void);
> > > > > +void __init protect_kernel_linear_mapping_text_rodata(void);
> > > > > #else
> > > > > static inline void protect_kernel_linear_mapping_text_rodata(void) {}
> > > > > #endif
> > > > > diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
> > > > > index 4c4c92ce0bb8..eac2d5c27b3e 100644
> > > > > --- a/arch/riscv/mm/init.c
> > > > > +++ b/arch/riscv/mm/init.c
> > > > > @@ -53,7 +53,7 @@ struct pt_alloc_ops {
> > > > > #endif
> > > > > };
> > > > >
> > > > > -static phys_addr_t dma32_phys_limit __ro_after_init;
> > > > > +static phys_addr_t dma32_phys_limit __initdata;
> > > > >
> > > > > static void __init zone_sizes_init(void)
> > > > > {
> > > > > @@ -184,7 +184,7 @@ extern char _sdata[], _edata[];
> > > > > #endif /* CONFIG_XIP_KERNEL */
> > > > >
> > > > > #ifdef CONFIG_MMU
> > > > > -static struct pt_alloc_ops _pt_ops __ro_after_init;
> > > > > +static struct pt_alloc_ops _pt_ops __initdata;
> > > > >
> > > > > #ifdef CONFIG_XIP_KERNEL
> > > > > #define pt_ops (*(struct pt_alloc_ops *)XIP_FIXUP(&_pt_ops))
> > > > > @@ -200,13 +200,13 @@ EXPORT_SYMBOL(va_pa_offset);
> > > > > #endif
> > > > > /* Offset between kernel mapping virtual address and kernel load address */
> > > > > #ifdef CONFIG_64BIT
> > > > > -unsigned long va_kernel_pa_offset;
> > > > > +unsigned long va_kernel_pa_offset __ro_after_init;
> > > > > EXPORT_SYMBOL(va_kernel_pa_offset);
> > > > > #endif
> > > > > #ifdef CONFIG_XIP_KERNEL
> > > > > #define va_kernel_pa_offset (*((unsigned long *)XIP_FIXUP(&va_kernel_pa_offset)))
> > > > > #endif
> > > > > -unsigned long va_kernel_xip_pa_offset;
> > > > > +unsigned long va_kernel_xip_pa_offset __ro_after_init;
> > > > > EXPORT_SYMBOL(va_kernel_xip_pa_offset);
> > > > > #ifdef CONFIG_XIP_KERNEL
> > > > > #define va_kernel_xip_pa_offset (*((unsigned long *)XIP_FIXUP(&va_kernel_xip_pa_offset)))
> > > > > @@ -216,7 +216,7 @@ EXPORT_SYMBOL(pfn_base);
> > > > >
> > > > > pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
> > > > > pgd_t trampoline_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
> > > > > -pte_t fixmap_pte[PTRS_PER_PTE] __page_aligned_bss;
> > > > > +static pte_t fixmap_pte[PTRS_PER_PTE] __page_aligned_bss;
> > > > >
> > > > > pgd_t early_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
> > > > >
> > > > > @@ -253,7 +253,7 @@ static inline pte_t *__init get_pte_virt_fixmap(phys_addr_t pa)
> > > > > return (pte_t *)set_fixmap_offset(FIX_PTE, pa);
> > > > > }
> > > > >
> > > > > -static inline pte_t *get_pte_virt_late(phys_addr_t pa)
> > > > > +static inline pte_t *__init get_pte_virt_late(phys_addr_t pa)
> > > > > {
> > > > > return (pte_t *) __va(pa);
> > > > > }
> > > > > @@ -272,7 +272,7 @@ static inline phys_addr_t __init alloc_pte_fixmap(uintptr_t va)
> > > > > return memblock_phys_alloc(PAGE_SIZE, PAGE_SIZE);
> > > > > }
> > > > >
> > > > > -static phys_addr_t alloc_pte_late(uintptr_t va)
> > > > > +static phys_addr_t __init alloc_pte_late(uintptr_t va)
> > > > > {
> > > > > unsigned long vaddr;
> > > > >
> > > > > @@ -296,10 +296,10 @@ static void __init create_pte_mapping(pte_t *ptep,
> > > > >
> > > > > #ifndef __PAGETABLE_PMD_FOLDED
> > > > >
> > > > > -pmd_t trampoline_pmd[PTRS_PER_PMD] __page_aligned_bss;
> > > > > -pmd_t fixmap_pmd[PTRS_PER_PMD] __page_aligned_bss;
> > > > > -pmd_t early_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
> > > > > -pmd_t early_dtb_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
> > > > > +static pmd_t trampoline_pmd[PTRS_PER_PMD] __page_aligned_bss;
> > > > > +static pmd_t fixmap_pmd[PTRS_PER_PMD] __page_aligned_bss;
> > > > > +static pmd_t early_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
> > > > > +static pmd_t early_dtb_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
> > > > >
> > > > > #ifdef CONFIG_XIP_KERNEL
> > > > > #define trampoline_pmd ((pmd_t *)XIP_FIXUP(trampoline_pmd))
> > > > > @@ -319,7 +319,7 @@ static pmd_t *__init get_pmd_virt_fixmap(phys_addr_t pa)
> > > > > return (pmd_t *)set_fixmap_offset(FIX_PMD, pa);
> > > > > }
> > > > >
> > > > > -static pmd_t *get_pmd_virt_late(phys_addr_t pa)
> > > > > +static pmd_t *__init get_pmd_virt_late(phys_addr_t pa)
> > > > > {
> > > > > return (pmd_t *) __va(pa);
> > > > > }
> > > > > @@ -336,7 +336,7 @@ static phys_addr_t __init alloc_pmd_fixmap(uintptr_t va)
> > > > > return memblock_phys_alloc(PAGE_SIZE, PAGE_SIZE);
> > > > > }
> > > > >
> > > > > -static phys_addr_t alloc_pmd_late(uintptr_t va)
> > > > > +static phys_addr_t __init alloc_pmd_late(uintptr_t va)
> > > > > {
> > > > > unsigned long vaddr;
> > > > >
> > > > > @@ -454,14 +454,16 @@ asmlinkage void __init __copy_data(void)
> > > > > #error "setup_vm() is called from head.S before relocate so it should not use absolute addressing."
> > > > > #endif
> > > > >
> > > > > -uintptr_t load_pa, load_sz;
> > > > > +static uintptr_t load_pa __initdata;
> > > >
> > > > Making load_pa static causing clang built kernels to no longer boot,
> > > > hanging after just a few lines of output in the console:
> > > >
> > > > https://github.com/ClangBuiltLinux/continuous-integration2/runs/2717606254?check_suite_focus=true
> > > >
> > > > I am not sure why that would make a difference nor why GCC is okay with
> > > > it. If it is a clang bug, it appears to be there for a while, given that
> > > > it reproduces back to clang-11.
> > >
> > > I can reproduce the issue. Here are my findindings:
> > >
> > > * gcc + binutils can't reproduce it
> > > * clang + llvm-utils + ias can reproduce it
> > > * clang + binutils can reproduce it
>
> Yes, this seems like something strictly related to clang so that is what
> I have been testing with.
>
> > > All below tests are done with clang + binutils.
> > >
> > > Then I applied below modification:
> > >
> > > -static uintptr_t load_pa __initdata;
> > > +uintptr_t load_pa __initdata;
> > >
> > > I got below panic log:
> > > [ 0.015418] Unable to handle kernel paging request at virtual address fffffffffffffff9
> > > [ 0.016432] Oops [#1]
> > > [ 0.016679] Modules linked in:
> > > [ 0.017103] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.13.0-rc1+ #5
> > > [ 0.017711] Hardware name: riscv-virtio,qemu (DT)
> > > [ 0.018201] epc : trace_hardirqs_on+0x60/0xb2
> > > [ 0.018582] ra : restore_all+0xe/0x66
> > > [ 0.018879] epc : ffffffff800cb09a ra : ffffffff800027b8 sp : ffffffff80c03dd0
> > > [ 0.019376] gp : ffffffff80d001c8 tp : ffffffff80c0c180 t0 : 0000000000000020
> > > [ 0.019870] t1 : ffffffff80006e40 t2 : ffffffff800d2e0a s0 : ffffffff80c03e00
> > > [ 0.020346] s1 : 0000000000000001 a0 : 0000000000000001 a1 : 0000000000000001
> > > [ 0.020800] a2 : 0000000000000001 a3 : 0000000000000000 a4 : 0000000000000000
> > > [ 0.021243] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000054494d45
> > > [ 0.021717] s2 : ffffffff800027b8 s3 : ffffffff80d35968 s4 : ffffffff8061e1d8
> > > [ 0.022179] s5 : ffffffff80c0c180 s6 : ffffffe000e34b50 s7 : 00000000800130f0
> > > [ 0.022674] s8 : 000000000000007f s9 : 0000000080012010 s10: 0000000000000000
> > > [ 0.023176] s11: 0000000000000000 t3 : ffffffff80d00108 t4 : ffffffff80006e40
> > > [ 0.023693] t5 : ffffffff80006e40 t6 : ffffffff800d2e0a
> > > [ 0.024153] status: 0000000000000100 badaddr: fffffffffffffff9 cause: 000000000000000d
> > > [ 0.025367] Call Trace:
> > > [ 0.025749] [<ffffffff800cb09a>] trace_hardirqs_on+0x60/0xb2
> > > [ 0.026402] [<ffffffff800027b8>] restore_all+0xe/0x66
> > > [ 0.027261] Unable to handle kernel paging request at virtual address fffffffffffffffa
> > > [ 0.027827] Oops [#2]
> > > [ 0.028013] Modules linked in:
> > > [ 0.028321] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 5.13.0-rc1+ #5
> > > [ 0.028839] Hardware name: riscv-virtio,qemu (DT)
> > > [ 0.029166] epc : trace_hardirqs_on+0x60/0xb2
> > > [ 0.029505] ra : restore_all+0xe/0x66
> > > [ 0.029785] epc : ffffffff800cb09a ra : ffffffff800027b8 sp : ffffffff80c03a80
> > > [ 0.030266] gp : ffffffff80d001c8 tp : ffffffff80c0c180 t0 : 0000000000000020
> > > [ 0.030748] t1 : ffffffff80006e40 t2 : ffffffff800d2e0a s0 : ffffffff80c03ab0
> > > [ 0.031227] s1 : 0000000000000001 a0 : 0000000000000002 a1 : 0000000000000002
> > > [ 0.031717] a2 : 0000000000000001 a3 : 0000000000000000 a4 : 0000000000000000
> > > [ 0.032199] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000054494d45
> > > [ 0.032680] s2 : ffffffff800027b8 s3 : ffffffff80d35968 s4 : ffffffff8061e1d8
> > > [ 0.033160] s5 : ffffffff80c0c180 s6 : ffffffe000e34b50 s7 : 00000000800130f0
> > > [ 0.033642] s8 : 000000000000007f s9 : 0000000080012010 s10: 0000000000000000
> > > [ 0.034123] s11: 0000000000000000 t3 : ffffffff80d00108 t4 : ffffffff80006e40
> > > [ 0.034601] t5 : ffffffff80006e40 t6 : ffffffff800d2e0a
> > > [ 0.034965] status: 0000000000000100 badaddr: fffffffffffffffa cause: 000000000000000d
> > > [ 0.035492] Call Trace:
> > > [ 0.035682] [<ffffffff800cb09a>] trace_hardirqs_on+0x60/0xb2
> > > [ 0.036077] [<ffffffff800027b8>] restore_all+0xe/0x66
> > > [ 0.036545] ---[ end trace 7f4fbff09d927668 ]---
> > > [ 0.037188] Kernel panic - not syncing: Attempted to kill the idle task!
> > > [ 0.038107] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]---
> > >
> > > Then I checked 5.13-rc1, above panic log can be reproduced too. So the issue
> > > should exist there for a while. I never tried clang with riscv, did you remember
> > > which last commit or version clang works, I may try to bisect.
> V> >
> >
> > More findings:
> >
> > *The above panic issue can also be seen from 5.12-rc2. If disable FTRACE, then
> > the panic disappears, kernel can boot
> >
> > *so I retested riscv next tree w/ FTRACE disabled, kernel can boot w/ below
> > modification:
>
> Yeah, I do not enable CONFIG_FTRACE because it is not enabled in
> ARCH=riscv defconfig by default.
>
> > -static uintptr_t load_pa __initdata;
> > +uintptr_t load_pa __initdata;
> >
> > This is a weird issue. Any clue is appreciated.
>
> Unfortunately, this is outside of my realm of expertise, as I am
> unfamiliar with RISC-V at this level. Maybe Palmer has some ideas. I
> would think that changing this variable to static would be fine given
> that the symbol is only used in this translation unit but clearly not. I
> have attempted to debug this in gdb but that does not really get me
> anywhere: I cannot break on start_kernel() for whatever reason and the
> kernel never gets to my breakpoint in setup_vm().
>
> I did decide to through a BUG() around arch/riscv/mm/init.c to see
> exactly which statement causes everything to hang. I landed on:
>
> csr_write(CSR_SATP, PFN_DOWN(__pa_symbol(swapper_pg_dir)) | SATP_MODE);
>
> in setup_vm_final(). No idea how that is relevant to this.
>
> Some people in the ClangBuiltLinux bi-weekly meeting today pointed out
> that since load_pa is assigned to the linker defined symbol _start,
> there could be some optimization that goes awry here. I have keyed that
Thanks for the inspiration. Below patch fixes the hang issue, but I didn't
go through all necessary WRITE_ONCE convertions.
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index ae32f78207f0..fa9336a2583f 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -504,7 +504,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
va_kernel_xip_pa_offset = kernel_virt_addr - xiprom;
#else
- load_pa = (uintptr_t)(&_start);
+ WRITE_ONCE(load_pa, (uintptr_t)(&_start));
load_sz = (uintptr_t)(&_end) - load_pa;
#endif
> list in now. For full context:
>
> https://lore.kernel.org/r/YLaWseLdg5JYElVx@Ryzen-9-3900X.localdomain/
>
> Cheers,
> Nathan
More information about the linux-riscv
mailing list