[PATCH v3 1/1] riscv: __asm_copy_to-from_user: Optimize unaligned memory access and pipeline stall
Geert Uytterhoeven
geert at linux-m68k.org
Tue Jul 13 11:10:33 PDT 2021
Hi Günter, Tsukamoto-san,
On Sat, Jul 10, 2021 at 3:50 AM Guenter Roeck <linux at roeck-us.net> wrote:
> On Wed, Jun 23, 2021 at 09:40:39PM +0900, Akira Tsukamoto wrote:
> > This patch will reduce cpu usage dramatically in kernel space especially
> > for application which use sys-call with large buffer size, such as network
> > applications. The main reason behind this is that every unaligned memory
> > access will raise exceptions and switch between s-mode and m-mode causing
> > large overhead.
> >
> > First copy in bytes until reaches the first word aligned boundary in
> > destination memory address. This is the preparation before the bulk
> > aligned word copy.
> >
> > The destination address is aligned now, but oftentimes the source address
> > is not in an aligned boundary. To reduce the unaligned memory access, it
> > reads the data from source in aligned boundaries, which will cause the
> > data to have an offset, and then combines the data in the next iteration
> > by fixing offset with shifting before writing to destination. The majority
> > of the improving copy speed comes from this shift copy.
> >
> > In the lucky situation that the both source and destination address are on
> > the aligned boundary, perform load and store with register size to copy the
> > data. Without the unrolling, it will reduce the speed since the next store
> > instruction for the same register using from the load will stall the
> > pipeline.
> >
> > At last, copying the remainder in one byte at a time.
> >
> > Signed-off-by: Akira Tsukamoto <akira.tsukamoto at gmail.com>
>
> This patch causes all riscv32 qemu emulations to stall during boot.
> The log suggests that something in kernel/user communication may be wrong.
>
> Bad case:
>
> Starting syslogd: OK
> Starting klogd: OK
> /etc/init.d/S02sysctl: line 68: syntax error: EOF in backquote substitution
> /etc/init.d/S20urandom: line 1: syntax error: unterminated quoted string
> Starting network: /bin/sh: syntax error: unterminated quoted string
> # first bad commit: [ca6eaaa210deec0e41cbfc380bf89cf079203569] riscv: __asm_copy_to-from_user: Optimize unaligned memory access and pipeline stall
Same here on vexriscv. Bisected to the same commit.
The actual scripts look fine when using "cat", but contain some garbage
when executing them using "sh -v".
Tsukamoto-san: glancing at the patch:
+ addi a0, a0, 8*SZREG
+ addi a1, a1, 8*SZREG
I think you forgot about rv32, where registers cover only 4
bytes each?
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
More information about the linux-riscv
mailing list