[PATCH 3/4] riscv: Improve kasan population function
Alexandre Ghiti
alex at ghiti.fr
Mon Feb 8 14:30:16 EST 2021
Current population code populates a whole page table without taking care
of what could have been already allocated and without taking into account
possible index in page table, assuming the virtual address to map is always
aligned on the page table size, which, for example, won't be the case when
the kernel will get pushed to the end of the address space.
Address those problems by rewriting the kasan population function,
splitting it into subfunctions for each different page table level.
Signed-off-by: Alexandre Ghiti <alex at ghiti.fr>
---
arch/riscv/mm/kasan_init.c | 91 ++++++++++++++++++++++++++------------
1 file changed, 63 insertions(+), 28 deletions(-)
diff --git a/arch/riscv/mm/kasan_init.c b/arch/riscv/mm/kasan_init.c
index 7bbe09416a2e..b7d4d9abd144 100644
--- a/arch/riscv/mm/kasan_init.c
+++ b/arch/riscv/mm/kasan_init.c
@@ -47,37 +47,72 @@ asmlinkage void __init kasan_early_init(void)
local_flush_tlb_all();
}
-static void __init populate(void *start, void *end)
+static void kasan_populate_pte(pmd_t *pmd, unsigned long vaddr, unsigned long end)
+{
+ phys_addr_t phys_addr;
+ pte_t *ptep, *base_pte;
+
+ if (pmd_none(*pmd))
+ base_pte = memblock_alloc(PTRS_PER_PTE * sizeof(pte_t), PAGE_SIZE);
+ else
+ base_pte = (pte_t *)pmd_page_vaddr(*pmd);
+
+ ptep = base_pte + pte_index(vaddr);
+
+ do {
+ if (pte_none(*ptep)) {
+ phys_addr = memblock_phys_alloc(PAGE_SIZE, PAGE_SIZE);
+ set_pte(ptep, pfn_pte(PFN_DOWN(phys_addr), PAGE_KERNEL));
+ }
+ } while (ptep++, vaddr += PAGE_SIZE, vaddr != end);
+
+ set_pmd(pmd, pfn_pmd(PFN_DOWN(__pa(base_pte)), PAGE_TABLE));
+}
+
+static void kasan_populate_pmd(pgd_t *pgd, unsigned long vaddr, unsigned long end)
+{
+ phys_addr_t phys_addr;
+ pmd_t *pmdp, *base_pmd;
+ unsigned long next;
+
+ base_pmd = (pmd_t *)pgd_page_vaddr(*pgd);
+ if (base_pmd == lm_alias(kasan_early_shadow_pmd))
+ base_pmd = memblock_alloc(PTRS_PER_PMD * sizeof(pmd_t), PAGE_SIZE);
+
+ pmdp = base_pmd + pmd_index(vaddr);
+
+ do {
+ next = pmd_addr_end(vaddr, end);
+ kasan_populate_pte(pmdp, vaddr, next);
+ } while (pmdp++, vaddr = next, vaddr != end);
+
+ /*
+ * Wait for the whole PGD to be populated before setting the PGD in
+ * the page table, otherwise, if we did set the PGD before populating
+ * it entirely, memblock could allocate a page at a physical address
+ * where KASAN is not populated yet and then we'd get a page fault.
+ */
+ set_pgd(pgd, pfn_pgd(PFN_DOWN(__pa(base_pmd)), PAGE_TABLE));
+}
+
+static void kasan_populate_pgd(unsigned long vaddr, unsigned long end)
+{
+ phys_addr_t phys_addr;
+ pgd_t *pgdp = pgd_offset_k(vaddr);
+ unsigned long next;
+
+ do {
+ next = pgd_addr_end(vaddr, end);
+ kasan_populate_pmd(pgdp, vaddr, next);
+ } while (pgdp++, vaddr = next, vaddr != end);
+}
+
+static void __init kasan_populate(void *start, void *end)
{
- unsigned long i, offset;
unsigned long vaddr = (unsigned long)start & PAGE_MASK;
unsigned long vend = PAGE_ALIGN((unsigned long)end);
- unsigned long n_pages = (vend - vaddr) / PAGE_SIZE;
- unsigned long n_ptes =
- ((n_pages + PTRS_PER_PTE) & -PTRS_PER_PTE) / PTRS_PER_PTE;
- unsigned long n_pmds =
- ((n_ptes + PTRS_PER_PMD) & -PTRS_PER_PMD) / PTRS_PER_PMD;
-
- pte_t *pte =
- memblock_alloc(n_ptes * PTRS_PER_PTE * sizeof(pte_t), PAGE_SIZE);
- pmd_t *pmd =
- memblock_alloc(n_pmds * PTRS_PER_PMD * sizeof(pmd_t), PAGE_SIZE);
- pgd_t *pgd = pgd_offset_k(vaddr);
-
- for (i = 0; i < n_pages; i++) {
- phys_addr_t phys = memblock_phys_alloc(PAGE_SIZE, PAGE_SIZE);
- set_pte(&pte[i], pfn_pte(PHYS_PFN(phys), PAGE_KERNEL));
- }
-
- for (i = 0, offset = 0; i < n_ptes; i++, offset += PTRS_PER_PTE)
- set_pmd(&pmd[i],
- pfn_pmd(PFN_DOWN(__pa(&pte[offset])),
- __pgprot(_PAGE_TABLE)));
- for (i = 0, offset = 0; i < n_pmds; i++, offset += PTRS_PER_PMD)
- set_pgd(&pgd[i],
- pfn_pgd(PFN_DOWN(__pa(&pmd[offset])),
- __pgprot(_PAGE_TABLE)));
+ kasan_populate_pgd(vaddr, vend);
local_flush_tlb_all();
memset(start, KASAN_SHADOW_INIT, end - start);
@@ -99,7 +134,7 @@ void __init kasan_init(void)
if (start >= end)
break;
- populate(kasan_mem_to_shadow(start), kasan_mem_to_shadow(end));
+ kasan_populate(kasan_mem_to_shadow(start), kasan_mem_to_shadow(end));
};
for (i = 0; i < PTRS_PER_PTE; i++)
--
2.20.1
More information about the linux-riscv
mailing list