[PATCH v17 00/16] RISC-V Kendryte K210 support improvements
Damien Le Moal
damien.lemoal at wdc.com
Sun Feb 7 18:12:40 EST 2021
This series of patches improves support for boards based on the Canaan
Kendryte K210 RISC-V dual core SoC. Minimal support for this SoC is
already included in the kernel. These patches complete it, enabling
support for most peripherals present on the SoC as well as introducing
device trees for the various K210 boards available on the market today
from SiPeed and Kendryte.
The patches here are the remaining patches not yet applied.
Patch 1 adds the SoC clock driver.
Patches 2 to 8 add and update device tree bindings documentation to
document the K210 device tree files. In particular, patch 2 and 3
define compatible strings used for the SoC CPU and for the K210 based
Patches 9 to 14 update the existing K210 base device tree and add new
device tree files for several K210 based boards: MAIX Bit, MAIXDUINO,
MAIX Dock and MAIX Go boards from SiPeed and the KD233 development
board from Canaan.
Finally the last two patches updates the k210 nommu defconfig to include
the newly implemented drivers and provide a new default configuration
file enabling SD card support.
A lot of the work on the device tree and on the K210 drivers come from
the work by Sean Anderson for the U-Boot project support of the K210
SoC. Sean also helped with debugging many aspects of the K210 support.
A tree with all patches applied is available here:
https://github.com/damien-lemoal/linux, k210-sysctl-v30 branch.
A demonstration of this series used on a SiPeed MAIX Dock
board together with an I2C servo controller can be seen here:
This tree was used to build userspace busybox environment image that is
then copied onto an SD card formatted with ext2:
Of note is that running this userspace environment requires a revert of
commit 2217b982624680d19a80ebb4600d05c8586c4f96 introduced during the
5.9 development cycle. Without this revert, execution of the init
process fails. A problem with the riscv port of elf2flt is suspected but
not confirmed. I am now starting to investigate this problem.
Reviews and comments are as always much welcome.
Changes from v16:
* Rebased on rc7
* Addressed Rob's comment on patch 7
* Added review and ack tags.
Changes from v15:
* Addressed Rob's comments on patches 4 and 5
* Fixed patch 7 ngpios property
* Added review and ack tags.
Changes from v14:
* Fixed typo in patch 4
* Added reviewed-by tags
Changes from v13:
* Rebased on rc6
* Removed FPIOA driver patch as it is already queued.
Changes from v12:
* Addressed Rab's comments: keep SoC specific compatible string for DT
nodes reusing existing IP blocks (e.g. PLIC and CLINT).
* Addressed dt-bindings schema file check warnings.
Changes from v11:
* Addressed Stephen's comment on the clock driver
* Fixed and added device tree bindings yaml files and fixed the device
tree files to fix all warnings generated by make dtbs_check
* Rebased on riscv tree fixes + latest riscv for-next branches.
Changes from v10:
* Rebased on riscv tree fixes+for-next branches. Patches already applied
to these branches were removed from this series.
* Fixed the clock driver and pinctrl driver patch titles to indicate the
correct target sub-components.
* Applied reviewed-by tags from Anup.
Changes from v9:
* Added patch 6 to avoid DTS compilation errors after patch 9 is
applied and until patch 16 is applied.
Changes from v8:
* Addressed Rob's comments on the sysctl driver bindings documentation
* Fixed a typo in the fpios driver bindings documentation
Changes from v7:
* Removed the __init annotation for the drivers reset, pinctrl and
sysctl drivers probe functions as suggested by Geert. Also removed
the __refdata annotation for the struct platform_driver variables of
Changes from v6:
* Annotate struct platform_driver variables with __refdata to avoid
section mismatch compilation errors
* Add empty sentinel entry to of_device_id tables of the sysctl, reset
and pinctrl drivers.
Changes from v5:
* Addressed Philipp's comment on the reset controller driver
* Added patch 6 to reduce the size of the clock driver patch
(now patch 12).
Changes from v4:
* Simplified reset controller driver using of_xlate callback as
suggested by Philipp
* Fixed compilation error when using other configs than one of the
* Addressed most clock driver comments from Stephen.
* Removed CONFIG_GPIO_SYSFS from defconfigs
* Rebased on 5.10-rc7
Changes from V3:
* Add one entry per driver in MAINTAINERS file
Changes from V2:
* Add MAINTAINERS file entry for the SoC support, listing myself as
* Removed use of postcore_initcall() for declaring the drivers, using
the regular builtin_platform_driver() instead.
* Fixed fpio pinctrl driver bindings documentation as commented by
Geert: removed input-schmitt and added input-schmitt-disable, fixed
typo and added input-disable and output-disable.
* Fixed device tree to have cs-gpios active low, as per the default, as
active high necessity was an artifact of the gpio level double
inversion bug fixed recently.
* Removed CONFIG_VT from defconfigs to reduce the kernel image size as
suggested by Geert.
Changes from v1:
* Improved DT bindings documentation
* SPI and GPIO patches removed from this series (and being processed
directly through the relevant subsystems directly)
* Improved device trees
* Various cleanup and improvments of the drivers
Damien Le Moal (16):
clk: Add RISC-V Canaan Kendryte K210 clock driver
dt-bindings: add Canaan boards compatible strings
dt-bindings: update risc-v cpu properties
dt-bindings: update sifive plic compatible string
dt-bindings: update sifive clint compatible string
dt-bindings: update sifive uart compatible string
dt-bindings: fix sifive gpio properties
dt-bindings: add resets property to dw-apb-timer
riscv: Update Canaan Kendryte K210 device tree
riscv: Add SiPeed MAIX BiT board device tree
riscv: Add SiPeed MAIX DOCK board device tree
riscv: Add SiPeed MAIX GO board device tree
riscv: Add SiPeed MAIXDUINO board device tree
riscv: Add Kendryte KD233 board device tree
riscv: Update Canaan Kendryte K210 defconfig
riscv: Add Canaan Kendryte K210 SD card defconfig
.../devicetree/bindings/gpio/sifive,gpio.yaml | 25 +-
.../sifive,plic-1.0.0.yaml | 13 +-
.../devicetree/bindings/riscv/canaan.yaml | 47 +
.../devicetree/bindings/riscv/cpus.yaml | 2 +
.../bindings/serial/sifive-serial.yaml | 1 +
.../bindings/timer/sifive,clint.yaml | 12 +-
.../bindings/timer/snps,dw-apb-timer.yaml | 3 +
MAINTAINERS | 1 +
arch/riscv/Kconfig.socs | 2 +-
arch/riscv/boot/dts/canaan/canaan_kd233.dts | 177 +++
arch/riscv/boot/dts/canaan/k210.dts | 23 -
arch/riscv/boot/dts/canaan/k210.dtsi | 493 +++++++-
arch/riscv/boot/dts/canaan/k210_generic.dts | 46 +
.../riscv/boot/dts/canaan/sipeed_maix_bit.dts | 234 ++++
.../boot/dts/canaan/sipeed_maix_dock.dts | 236 ++++
arch/riscv/boot/dts/canaan/sipeed_maix_go.dts | 244 ++++
.../boot/dts/canaan/sipeed_maixduino.dts | 209 ++++
arch/riscv/configs/nommu_k210_defconfig | 44 +-
.../riscv/configs/nommu_k210_sdcard_defconfig | 92 ++
drivers/clk/Kconfig | 8 +
drivers/clk/Makefile | 1 +
drivers/clk/clk-k210.c | 1012 +++++++++++++++++
drivers/soc/canaan/Kconfig | 18 +-
drivers/soc/canaan/Makefile | 2 +-
drivers/soc/canaan/k210-sysctl.c | 205 +---
include/dt-bindings/clock/k210-clk.h | 1 -
include/soc/canaan/k210-sysctl.h | 2 +
27 files changed, 2902 insertions(+), 251 deletions(-)
create mode 100644 Documentation/devicetree/bindings/riscv/canaan.yaml
create mode 100644 arch/riscv/boot/dts/canaan/canaan_kd233.dts
delete mode 100644 arch/riscv/boot/dts/canaan/k210.dts
create mode 100644 arch/riscv/boot/dts/canaan/k210_generic.dts
create mode 100644 arch/riscv/boot/dts/canaan/sipeed_maix_bit.dts
create mode 100644 arch/riscv/boot/dts/canaan/sipeed_maix_dock.dts
create mode 100644 arch/riscv/boot/dts/canaan/sipeed_maix_go.dts
create mode 100644 arch/riscv/boot/dts/canaan/sipeed_maixduino.dts
create mode 100644 arch/riscv/configs/nommu_k210_sdcard_defconfig
create mode 100644 drivers/clk/clk-k210.c
More information about the linux-riscv