[PATCH v16 09/16] riscv: Update Canaan Kendryte K210 device tree
Rob Herring
robh at kernel.org
Fri Feb 5 15:25:05 EST 2021
On Fri, Feb 05, 2021 at 03:58:20PM +0900, Damien Le Moal wrote:
> Update the Canaan Kendryte K210 base device tree k210.dtsi to define
> all peripherals of the SoC, their clocks and reset lines. The device
> tree file k210.dts is renamed to k210_generic.dts and becomes the
> default value selection of the SOC_CANAAN_K210_DTB_BUILTIN_SOURCE
> configuration option. No device beside the serial console is defined by
> this device tree. This makes this generic device tree suitable for use
> with a builtin initramfs with all known K210 based boards.
>
> These changes result in the K210_CLK_ACLK clock ID to be unused and
> removed from the dt-bindings k210-clk.h header file.
>
> Most updates to the k210.dtsi file come from Sean Anderson's work on
> U-Boot support for the K210.
>
> Cc: Rob Herring <robh at kernel.org>
> Cc: devicetree at vger.kernel.org
> Signed-off-by: Damien Le Moal <damien.lemoal at wdc.com>
> ---
> arch/riscv/Kconfig.socs | 2 +-
> arch/riscv/boot/dts/canaan/k210.dts | 23 -
> arch/riscv/boot/dts/canaan/k210.dtsi | 535 +++++++++++++++++++-
> arch/riscv/boot/dts/canaan/k210_generic.dts | 46 ++
> include/dt-bindings/clock/k210-clk.h | 1 -
> 5 files changed, 554 insertions(+), 53 deletions(-)
> delete mode 100644 arch/riscv/boot/dts/canaan/k210.dts
> create mode 100644 arch/riscv/boot/dts/canaan/k210_generic.dts
>
> diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
> index 6402746c68f3..7efcece8896c 100644
> --- a/arch/riscv/Kconfig.socs
> +++ b/arch/riscv/Kconfig.socs
> @@ -51,7 +51,7 @@ config SOC_CANAAN_K210_DTB_SOURCE
> string "Source file for the Canaan Kendryte K210 builtin DTB"
> depends on SOC_CANAAN
> depends on SOC_CANAAN_K210_DTB_BUILTIN
> - default "k210"
> + default "k210_generic"
> help
> Base name (without suffix, relative to arch/riscv/boot/dts/canaan)
> for the DTS file that will be used to produce the DTB linked into the
> diff --git a/arch/riscv/boot/dts/canaan/k210.dts b/arch/riscv/boot/dts/canaan/k210.dts
> deleted file mode 100644
> index 0d1f28fce6b2..000000000000
> --- a/arch/riscv/boot/dts/canaan/k210.dts
> +++ /dev/null
> @@ -1,23 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0+
> -/*
> - * Copyright (C) 2020 Western Digital Corporation or its affiliates.
> - */
> -
> -/dts-v1/;
> -
> -#include "k210.dtsi"
> -
> -/ {
> - model = "Kendryte K210 generic";
> - compatible = "kendryte,k210";
> -
> - chosen {
> - bootargs = "earlycon console=ttySIF0";
> - stdout-path = "serial0";
> - };
> -};
> -
> -&uarths0 {
> - status = "okay";
> -};
> -
> diff --git a/arch/riscv/boot/dts/canaan/k210.dtsi b/arch/riscv/boot/dts/canaan/k210.dtsi
> index 354b263195a3..63c1f4c98d6c 100644
> --- a/arch/riscv/boot/dts/canaan/k210.dtsi
> +++ b/arch/riscv/boot/dts/canaan/k210.dtsi
> @@ -1,9 +1,11 @@
> // SPDX-License-Identifier: GPL-2.0+
> /*
> - * Copyright (C) 2019 Sean Anderson <seanga2 at gmail.com>
> + * Copyright (C) 2019-20 Sean Anderson <seanga2 at gmail.com>
> * Copyright (C) 2020 Western Digital Corporation or its affiliates.
> */
> #include <dt-bindings/clock/k210-clk.h>
> +#include <dt-bindings/pinctrl/k210-fpioa.h>
> +#include <dt-bindings/reset/k210-rst.h>
>
> / {
> /*
> @@ -12,14 +14,33 @@ / {
> */
> #address-cells = <1>;
> #size-cells = <1>;
> - compatible = "kendryte,k210";
> + compatible = "canaan,kendryte-k210";
>
> aliases {
> + cpu0 = &cpu0;
> + cpu1 = &cpu1;
> + dma0 = &dmac0;
> + gpio0 = &gpio0;
> + gpio1 = &gpio1_0;
> + i2c0 = &i2c0;
> + i2c1 = &i2c1;
> + i2c2 = &i2c2;
> + pinctrl0 = &fpioa;
> serial0 = &uarths0;
> + serial1 = &uart1;
> + serial2 = &uart2;
> + serial3 = &uart3;
> + spi0 = &spi0;
> + spi1 = &spi1;
> + spi2 = &spi2;
> + spi3 = &spi3;
> + timer0 = &timer0;
> + timer1 = &timer1;
> + timer2 = &timer2;
Don't add random aliases. Really, only the serialN ones should be here.
cpu, dma, pinctrl, timer are definitely non-standard.
> };
>
> /*
> - * The K210 has an sv39 MMU following the priviledge specification v1.9.
> + * The K210 has an sv39 MMU following the privileged specification v1.9.
> * Since this is a non-ratified draft specification, the kernel does not
> * support it and the K210 support enabled only for the !MMU case.
> * Be consistent with this by setting the CPUs MMU type to "none".
> @@ -30,14 +51,14 @@ cpus {
> timebase-frequency = <7800000>;
> cpu0: cpu at 0 {
> device_type = "cpu";
> + compatible = "canaan,k210", "riscv";
> reg = <0>;
> - compatible = "kendryte,k210", "sifive,rocket0", "riscv";
> riscv,isa = "rv64imafdc";
> - mmu-type = "none";
> - i-cache-size = <0x8000>;
> + mmu-type = "riscv,none";
> i-cache-block-size = <64>;
> - d-cache-size = <0x8000>;
> + i-cache-size = <0x8000>;
> d-cache-block-size = <64>;
> + d-cache-size = <0x8000>;
> cpu0_intc: interrupt-controller {
> #interrupt-cells = <1>;
> interrupt-controller;
> @@ -46,14 +67,14 @@ cpu0_intc: interrupt-controller {
> };
> cpu1: cpu at 1 {
> device_type = "cpu";
> + compatible = "canaan,k210", "riscv";
> reg = <1>;
> - compatible = "kendryte,k210", "sifive,rocket0", "riscv";
> riscv,isa = "rv64imafdc";
> - mmu-type = "none";
> - i-cache-size = <0x8000>;
> + mmu-type = "riscv,none";
> i-cache-block-size = <64>;
> - d-cache-size = <0x8000>;
> + i-cache-size = <0x8000>;
> d-cache-block-size = <64>;
> + d-cache-size = <0x8000>;
> cpu1_intc: interrupt-controller {
> #interrupt-cells = <1>;
> interrupt-controller;
> @@ -64,10 +85,15 @@ cpu1_intc: interrupt-controller {
>
> sram: memory at 80000000 {
> device_type = "memory";
> + compatible = "canaan,k210-sram";
> reg = <0x80000000 0x400000>,
> <0x80400000 0x200000>,
> <0x80600000 0x200000>;
> reg-names = "sram0", "sram1", "aisram";
> + clocks = <&sysclk K210_CLK_SRAM0>,
> + <&sysclk K210_CLK_SRAM1>,
> + <&sysclk K210_CLK_AI>;
> + clock-names = "sram0", "sram1", "aisram";
> };
>
> clocks {
> @@ -81,40 +107,493 @@ in0: oscillator {
> soc {
> #address-cells = <1>;
> #size-cells = <1>;
> - compatible = "kendryte,k210-soc", "simple-bus";
> + compatible = "simple-bus";
> ranges;
> interrupt-parent = <&plic0>;
>
> - sysctl: sysctl at 50440000 {
> - compatible = "kendryte,k210-sysctl", "simple-mfd";
> - reg = <0x50440000 0x1000>;
> - #clock-cells = <1>;
> + debug0: debug at 0 {
> + compatible = "canaan,k210-debug", "riscv,debug";
Not documented.
> + reg = <0x0 0x1000>;
> + status = "disabled";
> + };
> +
> + rom0: nvmem at 1000 {
> + reg = <0x1000 0x1000>;
> + read-only;
> + status = "disabled";
> };
>
> clint0: clint at 2000000 {
interrupt-controller at ...
> - #interrupt-cells = <1>;
> - compatible = "riscv,clint0";
> + compatible = "canaan,k210-clint", "sifive,clint0";
> reg = <0x2000000 0xC000>;
> - interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
> - &cpu1_intc 3 &cpu1_intc 7>;
> + interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
> + &cpu1_intc 3 &cpu1_intc 7>;
> };
>
> - plic0: interrupt-controller at c000000 {
> + plic0: interrupt-controller at C000000 {
No, lowercase hex in unit-addresses was correct.
> #interrupt-cells = <1>;
> - interrupt-controller;
> - compatible = "kendryte,k210-plic0", "riscv,plic0";
> + #address-cells = <0>;
> + compatible = "canaan,k210-plic", "sifive,plic-1.0.0";
> reg = <0xC000000 0x4000000>;
> - interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 0xffffffff>,
> - <&cpu1_intc 11>, <&cpu1_intc 0xffffffff>;
> + interrupt-controller;
> + interrupts-extended = <&cpu0_intc 11 &cpu1_intc 11>;
> riscv,ndev = <65>;
> - riscv,max-priority = <7>;
> };
>
> uarths0: serial at 38000000 {
> - compatible = "kendryte,k210-uarths", "sifive,uart0";
> + compatible = "canaan,k210-uarths", "sifive,uart0";
> reg = <0x38000000 0x1000>;
> interrupts = <33>;
> - clocks = <&sysctl K210_CLK_CPU>;
> + clocks = <&sysclk K210_CLK_CPU>;
> + status = "disabled";
> + };
> +
> + gpio0: gpio-controller at 38001000 {
> + #interrupt-cells = <2>;
> + #gpio-cells = <2>;
> + compatible = "canaan,k210-gpiohs", "sifive,gpio0";
> + reg = <0x38001000 0x1000>;
> + interrupt-controller;
> + interrupts = <34 35 36 37 38 39 40 41
> + 42 43 44 45 46 47 48 49
> + 50 51 52 53 54 55 56 57
> + 58 59 60 61 62 63 64 65>;
> + gpio-controller;
> + ngpios = <32>;
> + status = "disabled";
> + };
> +
> + kpu0: kpu at 40800000 {
> + compatible = "canaan,k210-kpu";
> + reg = <0x40800000 0xc00000>;
> + interrupts = <25>;
> + clocks = <&sysclk K210_CLK_AI>;
> + status = "disabled";
> + };
> +
> + fft0: fft at 42000000 {
> + compatible = "canaan,k210-fft";
> + reg = <0x42000000 0x400000>;
> + interrupts = <26>;
> + clocks = <&sysclk K210_CLK_FFT>;
> + resets = <&sysrst K210_RST_FFT>;
> + status = "disabled";
> + };
> +
> + dmac0: dma-controller at 50000000 {
> + compatible = "snps,axi-dma-1.01a";
> + reg = <0x50000000 0x1000>;
> + interrupts = <27 28 29 30 31 32>;
> + clocks = <&sysclk K210_CLK_DMA>, <&sysclk K210_CLK_DMA>;
> + clock-names = "core-clk", "cfgr-clk";
> + resets = <&sysrst K210_RST_DMA>;
> + dma-channels = <6>;
> + snps,dma-masters = <2>;
> + snps,priority = <0 1 2 3 4 5>;
> + snps,data-width = <5>;
> + snps,block-size = <0x200000 0x200000 0x200000
> + 0x200000 0x200000 0x200000>;
> + snps,axi-max-burst-len = <256>;
> + status = "disabled";
> + };
> +
> + apb0: bus at 50200000 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "simple-pm-bus";
> + ranges;
> + clocks = <&sysclk K210_CLK_APB0>;
> +
> + gpio1: gpio at 50200000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,dw-apb-gpio";
> + reg = <0x50200000 0x80>;
> + clocks = <&sysclk K210_CLK_APB0>,
> + <&sysclk K210_CLK_GPIO>;
> + clock-names = "bus", "db";
> + resets = <&sysrst K210_RST_GPIO>;
> + status = "disabled";
> +
> + gpio1_0: gpio-port at 0 {
> + #gpio-cells = <2>;
> + #interrupt-cells = <2>;
> + compatible = "snps,dw-apb-gpio-port";
> + reg = <0>;
> + interrupt-controller;
> + interrupts = <23>;
> + gpio-controller;
> + ngpios = <8>;
> + };
> + };
> +
> + uart1: serial at 50210000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x50210000 0x100>;
> + interrupts = <11>;
> + clocks = <&sysclk K210_CLK_UART1>,
> + <&sysclk K210_CLK_APB0>;
> + clock-names = "baudclk", "apb_pclk";
> + resets = <&sysrst K210_RST_UART1>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + dcd-override;
> + dsr-override;
> + cts-override;
> + ri-override;
> + status = "disabled";
> + };
> +
> + uart2: serial at 50220000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x50220000 0x100>;
> + interrupts = <12>;
> + clocks = <&sysclk K210_CLK_UART2>,
> + <&sysclk K210_CLK_APB0>;
> + clock-names = "baudclk", "apb_pclk";
> + resets = <&sysrst K210_RST_UART2>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + dcd-override;
> + dsr-override;
> + cts-override;
> + ri-override;
> + status = "disabled";
> + };
> +
> + uart3: serial at 50230000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x50230000 0x100>;
> + interrupts = <13>;
> + clocks = <&sysclk K210_CLK_UART3>,
> + <&sysclk K210_CLK_APB0>;
> + clock-names = "baudclk", "apb_pclk";
> + resets = <&sysrst K210_RST_UART3>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + dcd-override;
> + dsr-override;
> + cts-override;
> + ri-override;
> + status = "disabled";
> + };
> +
> + spi2: spi at 50240000 {
> + compatible = "canaan,k210-spi";
> + spi-slave;
> + reg = <0x50240000 0x100>;
> + interrupts = <3>;
> + clocks = <&sysclk K210_CLK_SPI2>,
> + <&sysclk K210_CLK_APB0>;
> + clock-names = "ssi_clk", "pclk";
> + resets = <&sysrst K210_RST_SPI2>;
> + spi-max-frequency = <25000000>;
> + status = "disabled";
> + };
> +
> + i2s0: i2s at 50250000 {
> + compatible = "snps,designware-i2s";
> + reg = <0x50250000 0x200>;
> + interrupts = <5>;
> + clocks = <&sysclk K210_CLK_I2S0>;
> + clock-names = "i2sclk";
> + resets = <&sysrst K210_RST_I2S0>;
> + status = "disabled";
> + };
> +
> + apu0: sound at 520250200 {
> + compatible = "canaan,k210-apu";
> + reg = <0x50250200 0x200>;
The unit-address and 'reg' value don't match.
> + status = "disabled";
> + };
> +
> + i2s1: i2s at 50260000 {
> + compatible = "snps,designware-i2s";
> + reg = <0x50260000 0x200>;
> + interrupts = <6>;
> + clocks = <&sysclk K210_CLK_I2S1>;
> + clock-names = "i2sclk";
> + resets = <&sysrst K210_RST_I2S1>;
> + status = "disabled";
> + };
> +
> + i2s2: i2s at 50270000 {
> + compatible = "snps,designware-i2s";
> + reg = <0x50270000 0x200>;
> + interrupts = <7>;
> + clocks = <&sysclk K210_CLK_I2S2>;
> + clock-names = "i2sclk";
> + resets = <&sysrst K210_RST_I2S2>;
> + status = "disabled";
> + };
> +
> + i2c0: i2c at 50280000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x50280000 0x100>;
> + interrupts = <8>;
> + clocks = <&sysclk K210_CLK_I2C0>,
> + <&sysclk K210_CLK_APB0>;
> + clock-names = "ref", "pclk";
> + resets = <&sysrst K210_RST_I2C0>;
> + status = "disabled";
> + };
> +
> + i2c1: i2c at 50290000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x50290000 0x100>;
> + interrupts = <9>;
> + clocks = <&sysclk K210_CLK_I2C1>,
> + <&sysclk K210_CLK_APB0>;
> + clock-names = "ref", "pclk";
> + resets = <&sysrst K210_RST_I2C1>;
> + status = "disabled";
> + };
> +
> + i2c2: i2c at 502A0000 {
Again, lowercase hex.
> + compatible = "snps,designware-i2c";
> + reg = <0x502A0000 0x100>;
> + interrupts = <10>;
> + clocks = <&sysclk K210_CLK_I2C2>,
> + <&sysclk K210_CLK_APB0>;
> + clock-names = "ref", "pclk";
> + resets = <&sysrst K210_RST_I2C2>;
> + status = "disabled";
> + };
> +
> + fpioa: pinmux at 502B0000 {
> + compatible = "canaan,k210-fpioa";
> + reg = <0x502B0000 0x100>;
> + clocks = <&sysclk K210_CLK_FPIOA>,
> + <&sysclk K210_CLK_APB0>;
> + clock-names = "ref", "pclk";
> + resets = <&sysrst K210_RST_FPIOA>;
> + canaan,k210-sysctl-power = <&sysctl 108>;
> + status = "disabled";
> + };
> +
> + sha256: sha256 at 502C0000 {
> + compatible = "canaan,k210-sha256";
> + reg = <0x502C0000 0x100>;
> + clocks = <&sysclk K210_CLK_SHA>;
> + resets = <&sysrst K210_RST_SHA>;
> + status = "disabled";
> + };
> +
> + timer0: timer at 502D0000 {
> + compatible = "snps,dw-apb-timer";
> + reg = <0x502D0000 0x100>;
> + interrupts = <14 15>;
> + clocks = <&sysclk K210_CLK_TIMER0>,
> + <&sysclk K210_CLK_APB0>;
> + clock-names = "timer", "pclk";
> + resets = <&sysrst K210_RST_TIMER0>;
> + status = "disabled";
> + };
> +
> + timer1: timer at 502E0000 {
> + compatible = "snps,dw-apb-timer";
> + reg = <0x502E0000 0x100>;
> + interrupts = <16 17>;
> + clocks = <&sysclk K210_CLK_TIMER1>,
> + <&sysclk K210_CLK_APB0>;
> + clock-names = "timer", "pclk";
> + resets = <&sysrst K210_RST_TIMER1>;
> + status = "disabled";
> + };
> +
> + timer2: timer at 502F0000 {
> + compatible = "snps,dw-apb-timer";
> + reg = <0x502F0000 0x100>;
> + interrupts = <18 19>;
> + clocks = <&sysclk K210_CLK_TIMER2>,
> + <&sysclk K210_CLK_APB0>;
> + clock-names = "timer", "pclk";
> + resets = <&sysrst K210_RST_TIMER2>;
> + status = "disabled";
> + };
> + };
> +
> + apb1: bus at 50400000 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "simple-pm-bus";
> + ranges;
> + clocks = <&sysclk K210_CLK_APB1>;
> +
> + wdt0: watchdog at 50400000 {
> + compatible = "snps,dw-wdt";
> + reg = <0x50400000 0x100>;
> + interrupts = <21>;
> + clocks = <&sysclk K210_CLK_WDT0>,
> + <&sysclk K210_CLK_APB1>;
> + clock-names = "tclk", "pclk";
> + resets = <&sysrst K210_RST_WDT0>;
> + status = "disabled";
> + };
> +
> + wdt1: watchdog at 50410000 {
> + compatible = "snps,dw-wdt";
> + reg = <0x50410000 0x100>;
> + interrupts = <22>;
> + clocks = <&sysclk K210_CLK_WDT1>,
> + <&sysclk K210_CLK_APB1>;
> + clock-names = "tclk", "pclk";
> + resets = <&sysrst K210_RST_WDT1>;
> + status = "disabled";
> + };
> +
> + otp0: nvmem at 50420000 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "canaan,k210-otp";
> + reg = <0x50420000 0x100>,
> + <0x88000000 0x20000>;
> + reg-names = "reg", "mem";
> + clocks = <&sysclk K210_CLK_ROM>;
> + resets = <&sysrst K210_RST_ROM>;
> + read-only;
> + status = "disabled";
Your disabled nodes seem a bit excessive. A device should really only be
disabled if it's a board level decision to use or not. I'd assume the
OTP is always there and usable.
> +
> + /* Bootloader */
> + firmware at 00000 {
Drop leading 0s.
Is this memory mapped? If so, you are missing 'ranges' in the parent to
make it translateable.
> + reg = <0x00000 0xC200>;
> + };
> +
> + /*
> + * config string as described in RISC-V
> + * privileged spec 1.9
> + */
> + config-1-9 at 1c000 {
> + reg = <0x1C000 0x1000>;
> + };
> +
> + /*
> + * Device tree containing only registers,
> + * interrupts, and cpus
> + */
> + fdt at 1d000 {
> + reg = <0x1D000 0x2000>;
> + };
> +
> + /* CPU/ROM credits */
> + credits at 1f000 {
> + reg = <0x1F000 0x1000>;
> + };
> + };
> +
> + dvp0: camera at 50430000 {
> + compatible = "canaan,k210-dvp";
No documented. Seems to be several of them.
> + reg = <0x50430000 0x100>;
> + interrupts = <24>;
> + clocks = <&sysclk K210_CLK_DVP>;
> + resets = <&sysrst K210_RST_DVP>;
> + canaan,k210-misc-offset = <&sysctl 84>;
> + status = "disabled";
> + };
> +
> + sysctl: syscon at 50440000 {
> + compatible = "canaan,k210-sysctl",
> + "syscon", "simple-mfd";
> + reg = <0x50440000 0x100>;
> + clocks = <&sysclk K210_CLK_APB1>;
> + clock-names = "pclk";
> +
> + sysclk: clock-controller {
> + #clock-cells = <1>;
> + compatible = "canaan,k210-clk";
> + clocks = <&in0>;
> + };
> +
> + sysrst: reset-controller {
> + compatible = "canaan,k210-rst";
> + #reset-cells = <1>;
> + };
> +
> + reboot: syscon-reboot {
> + compatible = "syscon-reboot";
> + regmap = <&sysctl>;
> + offset = <48>;
> + mask = <1>;
> + value = <1>;
> + };
> + };
> +
> + aes0: aes at 50450000 {
> + compatible = "canaan,k210-aes";
> + reg = <0x50450000 0x100>;
> + clocks = <&sysclk K210_CLK_AES>;
> + resets = <&sysrst K210_RST_AES>;
> + status = "disabled";
> + };
> +
> + rtc: rtc at 50460000 {
> + compatible = "canaan,k210-rtc";
> + reg = <0x50460000 0x100>;
> + clocks = <&in0>;
> + resets = <&sysrst K210_RST_RTC>;
> + interrupts = <20>;
> + status = "disabled";
> + };
> + };
> +
> + apb2: bus at 52000000 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "simple-pm-bus";
> + ranges;
> + clocks = <&sysclk K210_CLK_APB2>;
> +
> + spi0: spi at 52000000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "canaan,k210-spi";
> + reg = <0x52000000 0x100>;
> + interrupts = <1>;
> + clocks = <&sysclk K210_CLK_SPI0>,
> + <&sysclk K210_CLK_APB2>;
> + clock-names = "ssi_clk", "pclk";
> + resets = <&sysrst K210_RST_SPI0>;
> + reset-names = "spi";
> + spi-max-frequency = <25000000>;
> + num-cs = <4>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> +
> + spi1: spi at 53000000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "canaan,k210-spi";
> + reg = <0x53000000 0x100>;
> + interrupts = <2>;
> + clocks = <&sysclk K210_CLK_SPI1>,
> + <&sysclk K210_CLK_APB2>;
> + clock-names = "ssi_clk", "pclk";
> + resets = <&sysrst K210_RST_SPI1>;
> + reset-names = "spi";
> + spi-max-frequency = <25000000>;
> + num-cs = <4>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> +
> + spi3: spi at 54000000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,dwc-ssi-1.01a";
> + reg = <0x54000000 0x200>;
> + interrupts = <4>;
> + clocks = <&sysclk K210_CLK_SPI3>,
> + <&sysclk K210_CLK_APB2>;
> + clock-names = "ssi_clk", "pclk";
> + resets = <&sysrst K210_RST_SPI3>;
> + reset-names = "spi";
> + /* Could possibly go up to 200 MHz */
> + spi-max-frequency = <100000000>;
> + num-cs = <4>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> };
> };
> };
> diff --git a/arch/riscv/boot/dts/canaan/k210_generic.dts b/arch/riscv/boot/dts/canaan/k210_generic.dts
> new file mode 100644
> index 000000000000..396c8ca4d24d
> --- /dev/null
> +++ b/arch/riscv/boot/dts/canaan/k210_generic.dts
> @@ -0,0 +1,46 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2019-20 Sean Anderson <seanga2 at gmail.com>
> + * Copyright (C) 2020 Western Digital Corporation or its affiliates.
> + */
> +
> +/dts-v1/;
> +
> +#include "k210.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +
> +/ {
> + model = "Kendryte K210 generic";
> + compatible = "canaan,kendryte-k210";
> +
> + chosen {
> + bootargs = "earlycon console=ttySIF0";
> + stdout-path = "serial0:115200n8";
> + };
> +};
> +
> +&fpioa {
> + pinctrl-0 = <&jtag_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +
> + jtag_pins: jtag-pinmux {
> + pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
> + <K210_FPIOA(1, K210_PCF_JTAG_TDI)>,
> + <K210_FPIOA(2, K210_PCF_JTAG_TMS)>,
> + <K210_FPIOA(3, K210_PCF_JTAG_TDO)>;
> + };
> +
> + uarths_pins: uarths-pinmux {
> + pinmux = <K210_FPIOA(4, K210_PCF_UARTHS_RX)>,
> + <K210_FPIOA(5, K210_PCF_UARTHS_TX)>;
> + };
> +};
> +
> +&uarths0 {
> + pinctrl-0 = <&uarths_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> diff --git a/include/dt-bindings/clock/k210-clk.h b/include/dt-bindings/clock/k210-clk.h
> index a48176ad3c23..b2de702cbf75 100644
> --- a/include/dt-bindings/clock/k210-clk.h
> +++ b/include/dt-bindings/clock/k210-clk.h
> @@ -9,7 +9,6 @@
> /*
> * Kendryte K210 SoC clock identifiers (arbitrary values).
> */
> -#define K210_CLK_ACLK 0
> #define K210_CLK_CPU 0
> #define K210_CLK_SRAM0 1
> #define K210_CLK_SRAM1 2
> --
> 2.29.2
>
More information about the linux-riscv
mailing list