[PATCH] Revert "dts: phy: add GPIO number and active state used for phy reset"

Palmer Dabbelt palmer at dabbelt.com
Thu Feb 4 22:41:12 EST 2021


From: Palmer Dabbelt <palmerdabbelt at google.com>

VSC8541 phys need a special reset sequence, which the driver doesn't
currentlny support.  As a result enabling the reset via GPIO essentially
guarnteees that the device won't work correctly.

This reverts commit a0fa9d727043da2238432471e85de0bdb8a8df65.

Fixes: a0fa9d727043 ("dts: phy: add GPIO number and active state used for phy reset")
Cc: stable at vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt at google.com>
---
 arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
index 24d75a146e02..60846e88ae4b 100644
--- a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
+++ b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
@@ -90,7 +90,6 @@ &eth0 {
 	phy0: ethernet-phy at 0 {
 		compatible = "ethernet-phy-id0007.0771";
 		reg = <0>;
-		reset-gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
 	};
 };
 
-- 
2.30.0.478.g8a0d178c01-goog




More information about the linux-riscv mailing list