[RFC 05/32] char: impi, tpm: depend on HAS_IOPORT
Niklas Schnelle
schnelle at linux.ibm.com
Mon Dec 27 08:42:50 PST 2021
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add this dependency and ifdef
sections of code using inb()/outb() as alternative access methods.
Co-developed-by: Arnd Bergmann <arnd at kernel.org>
Signed-off-by: Arnd Bergmann <arnd at kernel.org>
Signed-off-by: Niklas Schnelle <schnelle at linux.ibm.com>
---
drivers/char/Kconfig | 3 ++-
drivers/char/ipmi/Makefile | 11 ++++-------
drivers/char/ipmi/ipmi_si_intf.c | 3 ++-
drivers/char/ipmi/ipmi_si_pci.c | 3 +++
drivers/char/tpm/Kconfig | 1 +
drivers/char/tpm/tpm_infineon.c | 14 ++++++++++----
drivers/char/tpm/tpm_tis_core.c | 19 ++++++++-----------
7 files changed, 30 insertions(+), 24 deletions(-)
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 740811893c57..3d046e364e53 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -33,6 +33,7 @@ config TTY_PRINTK_LEVEL
config PRINTER
tristate "Parallel printer support"
depends on PARPORT
+ depends on HAS_IOPORT
help
If you intend to attach a printer to the parallel port of your Linux
box (as opposed to using a serial printer; if the connector at the
@@ -346,7 +347,7 @@ config NVRAM
config DEVPORT
bool "/dev/port character device"
- depends on ISA || PCI
+ depends on HAS_IOPORT
default y
help
Say Y here if you want to support the /dev/port device. The /dev/port
diff --git a/drivers/char/ipmi/Makefile b/drivers/char/ipmi/Makefile
index 7ce790efad92..439bed4feb3a 100644
--- a/drivers/char/ipmi/Makefile
+++ b/drivers/char/ipmi/Makefile
@@ -5,13 +5,10 @@
ipmi_si-y := ipmi_si_intf.o ipmi_kcs_sm.o ipmi_smic_sm.o ipmi_bt_sm.o \
ipmi_si_hotmod.o ipmi_si_hardcode.o ipmi_si_platform.o \
- ipmi_si_port_io.o ipmi_si_mem_io.o
-ifdef CONFIG_PCI
-ipmi_si-y += ipmi_si_pci.o
-endif
-ifdef CONFIG_PARISC
-ipmi_si-y += ipmi_si_parisc.o
-endif
+ ipmi_si_mem_io.o
+ipmi_si-$(CONFIG_HAS_IOPORT) += ipmi_si_port_io.o
+ipmi_si-$(CONFIG_PCI) += ipmi_si_pci.o
+ipmi_si-$(CONFIG_PARISC) += ipmi_si_parisc.o
obj-$(CONFIG_IPMI_HANDLER) += ipmi_msghandler.o
obj-$(CONFIG_IPMI_DEVICE_INTERFACE) += ipmi_devintf.o
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 64dedb3ef8ec..e8094b4007de 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -1881,7 +1881,8 @@ int ipmi_si_add_smi(struct si_sm_io *io)
}
if (!io->io_setup) {
- if (io->addr_space == IPMI_IO_ADDR_SPACE) {
+ if (IS_ENABLED(CONFIG_HAS_IOPORT) &&
+ io->addr_space == IPMI_IO_ADDR_SPACE) {
io->io_setup = ipmi_si_port_setup;
} else if (io->addr_space == IPMI_MEM_ADDR_SPACE) {
io->io_setup = ipmi_si_mem_setup;
diff --git a/drivers/char/ipmi/ipmi_si_pci.c b/drivers/char/ipmi/ipmi_si_pci.c
index 74fa2055868b..b83d55685b22 100644
--- a/drivers/char/ipmi/ipmi_si_pci.c
+++ b/drivers/char/ipmi/ipmi_si_pci.c
@@ -97,6 +97,9 @@ static int ipmi_pci_probe(struct pci_dev *pdev,
}
if (pci_resource_flags(pdev, 0) & IORESOURCE_IO) {
+ if (!IS_ENABLED(CONFIG_HAS_IOPORT))
+ return -ENXIO;
+
io.addr_space = IPMI_IO_ADDR_SPACE;
io.io_setup = ipmi_si_port_setup;
} else {
diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
index 4a5516406c22..4bc52ed08015 100644
--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@@ -137,6 +137,7 @@ config TCG_NSC
config TCG_ATMEL
tristate "Atmel TPM Interface"
depends on PPC64 || HAS_IOPORT_MAP
+ depends on HAS_IOPORT
help
If you have a TPM security chip from Atmel say Yes and it
will be accessible from within Linux. To compile this driver
diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c
index 9c924a1440a9..2d2ae37153ba 100644
--- a/drivers/char/tpm/tpm_infineon.c
+++ b/drivers/char/tpm/tpm_infineon.c
@@ -51,34 +51,40 @@ static struct tpm_inf_dev tpm_dev;
static inline void tpm_data_out(unsigned char data, unsigned char offset)
{
+#ifdef CONFIG_HAS_IOPORT
if (tpm_dev.iotype == TPM_INF_IO_PORT)
outb(data, tpm_dev.data_regs + offset);
else
+#endif
writeb(data, tpm_dev.mem_base + tpm_dev.data_regs + offset);
}
static inline unsigned char tpm_data_in(unsigned char offset)
{
+#ifdef CONFIG_HAS_IOPORT
if (tpm_dev.iotype == TPM_INF_IO_PORT)
return inb(tpm_dev.data_regs + offset);
- else
- return readb(tpm_dev.mem_base + tpm_dev.data_regs + offset);
+#endif
+ return readb(tpm_dev.mem_base + tpm_dev.data_regs + offset);
}
static inline void tpm_config_out(unsigned char data, unsigned char offset)
{
+#ifdef CONFIG_HAS_IOPORT
if (tpm_dev.iotype == TPM_INF_IO_PORT)
outb(data, tpm_dev.config_port + offset);
else
+#endif
writeb(data, tpm_dev.mem_base + tpm_dev.index_off + offset);
}
static inline unsigned char tpm_config_in(unsigned char offset)
{
+#ifdef CONFIG_HAS_IOPORT
if (tpm_dev.iotype == TPM_INF_IO_PORT)
return inb(tpm_dev.config_port + offset);
- else
- return readb(tpm_dev.mem_base + tpm_dev.index_off + offset);
+#endif
+ return readb(tpm_dev.mem_base + tpm_dev.index_off + offset);
}
/* TPM header definitions */
diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index b2659a4c4016..eb298e82861e 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -879,11 +879,6 @@ static void tpm_tis_clkrun_enable(struct tpm_chip *chip, bool value)
clkrun_val &= ~LPC_CLKRUN_EN;
iowrite32(clkrun_val, data->ilb_base_addr + LPC_CNTRL_OFFSET);
- /*
- * Write any random value on port 0x80 which is on LPC, to make
- * sure LPC clock is running before sending any TPM command.
- */
- outb(0xCC, 0x80);
} else {
data->clkrun_enabled--;
if (data->clkrun_enabled)
@@ -894,13 +889,15 @@ static void tpm_tis_clkrun_enable(struct tpm_chip *chip, bool value)
/* Enable LPC CLKRUN# */
clkrun_val |= LPC_CLKRUN_EN;
iowrite32(clkrun_val, data->ilb_base_addr + LPC_CNTRL_OFFSET);
-
- /*
- * Write any random value on port 0x80 which is on LPC, to make
- * sure LPC clock is running before sending any TPM command.
- */
- outb(0xCC, 0x80);
}
+
+#ifdef CONFIG_HAS_IOPORT
+ /*
+ * Write any random value on port 0x80 which is on LPC, to make
+ * sure LPC clock is running before sending any TPM command.
+ */
+ outb(0xCC, 0x80);
+#endif
}
static const struct tpm_class_ops tpm_tis = {
--
2.32.0
More information about the linux-riscv
mailing list