[RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
Niklas Schnelle
schnelle at linux.ibm.com
Mon Dec 27 08:42:46 PST 2021
Introduce a new LEGACY_PCI Kconfig option which gates support for legacy
PCI devices including those attached to a PCI-to-PCI Express bridge and
PCI Express devices using legacy I/O spaces. Note that this is different
from non PCI uses of I/O ports such as by ACPI.
Add dependencies on LEGACY_PCI for all PCI drivers which only target
legacy PCI devices and ifdef legacy PCI specific functions in ata
handling.
Co-developed-by: Arnd Bergmann <arnd at kernel.org>
Signed-off-by: Arnd Bergmann <arnd at kernel.org>
Signed-off-by: Niklas Schnelle <schnelle at linux.ibm.com>
---
drivers/ata/Kconfig | 34 ++++++++--------
drivers/ata/ata_generic.c | 3 +-
drivers/ata/libata-sff.c | 2 +
drivers/comedi/Kconfig | 42 +++++++++++++++++++
drivers/gpio/Kconfig | 2 +-
drivers/hwmon/Kconfig | 6 +--
drivers/i2c/busses/Kconfig | 24 +++++------
drivers/input/gameport/Kconfig | 4 +-
drivers/isdn/hardware/mISDN/Kconfig | 14 +++----
drivers/media/cec/platform/Kconfig | 2 +-
drivers/media/pci/dm1105/Kconfig | 2 +-
drivers/media/radio/Kconfig | 2 +-
drivers/message/fusion/Kconfig | 8 ++--
drivers/net/arcnet/Kconfig | 2 +-
drivers/net/ethernet/8390/Kconfig | 2 +-
drivers/net/ethernet/amd/Kconfig | 2 +-
drivers/net/ethernet/intel/Kconfig | 4 +-
drivers/net/ethernet/sis/Kconfig | 6 +--
drivers/net/ethernet/ti/Kconfig | 4 +-
drivers/net/ethernet/via/Kconfig | 4 +-
drivers/net/fddi/Kconfig | 4 +-
drivers/net/wan/Kconfig | 2 +-
drivers/net/wireless/atmel/Kconfig | 4 +-
drivers/net/wireless/intersil/hostap/Kconfig | 4 +-
drivers/pci/Kconfig | 11 +++++
drivers/scsi/Kconfig | 20 ++++-----
drivers/scsi/aic7xxx/Kconfig.aic79xx | 2 +-
drivers/scsi/aic7xxx/Kconfig.aic7xxx | 2 +-
drivers/scsi/aic94xx/Kconfig | 2 +-
drivers/scsi/megaraid/Kconfig.megaraid | 2 +-
drivers/scsi/mvsas/Kconfig | 2 +-
drivers/scsi/qla2xxx/Kconfig | 2 +-
drivers/spi/Kconfig | 1 +
drivers/staging/sm750fb/Kconfig | 2 +-
drivers/staging/vt6655/Kconfig | 2 +-
drivers/tty/Kconfig | 2 +-
drivers/tty/serial/Kconfig | 2 +-
drivers/video/fbdev/Kconfig | 22 +++++-----
drivers/watchdog/Kconfig | 4 +-
sound/pci/Kconfig | 43 ++++++++++++++++----
40 files changed, 194 insertions(+), 110 deletions(-)
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index a7da8ea7b3ed..32e0489bd01c 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -556,7 +556,7 @@ comment "PATA SFF controllers with BMDMA"
config PATA_ALI
tristate "ALi PATA support"
- depends on PCI
+ depends on LEGACY_PCI
select PATA_TIMINGS
help
This option enables support for the ALi ATA interfaces
@@ -566,7 +566,7 @@ config PATA_ALI
config PATA_AMD
tristate "AMD/NVidia PATA support"
- depends on PCI
+ depends on LEGACY_PCI
select PATA_TIMINGS
help
This option enables support for the AMD and NVidia PATA
@@ -584,7 +584,7 @@ config PATA_ARASAN_CF
config PATA_ARTOP
tristate "ARTOP 6210/6260 PATA support"
- depends on PCI
+ depends on LEGACY_PCI
help
This option enables support for ARTOP PATA controllers.
@@ -621,7 +621,7 @@ config PATA_BK3710
config PATA_CMD64X
tristate "CMD64x PATA support"
- depends on PCI
+ depends on LEGACY_PCI
select PATA_TIMINGS
help
This option enables support for the CMD64x series chips
@@ -667,7 +667,7 @@ config PATA_CS5536
config PATA_CYPRESS
tristate "Cypress CY82C693 PATA support (Very Experimental)"
- depends on PCI
+ depends on LEGACY_PCI
select PATA_TIMINGS
help
This option enables support for the Cypress/Contaq CY82C693
@@ -707,7 +707,7 @@ config PATA_FTIDE010
config PATA_HPT366
tristate "HPT 366/368 PATA support"
- depends on PCI
+ depends on LEGACY_PCI
help
This option enables support for the HPT 366 and 368
PATA controllers via the new ATA layer.
@@ -716,7 +716,7 @@ config PATA_HPT366
config PATA_HPT37X
tristate "HPT 370/370A/371/372/374/302 PATA support"
- depends on PCI
+ depends on LEGACY_PCI
help
This option enables support for the majority of the later HPT
PATA controllers via the new ATA layer.
@@ -725,7 +725,7 @@ config PATA_HPT37X
config PATA_HPT3X2N
tristate "HPT 371N/372N/302N PATA support"
- depends on PCI
+ depends on LEGACY_PCI
help
This option enables support for the N variant HPT PATA
controllers via the new ATA layer.
@@ -828,7 +828,7 @@ config PATA_MPC52xx
config PATA_NETCELL
tristate "NETCELL Revolution RAID support"
- depends on PCI
+ depends on LEGACY_PCI
help
This option enables support for the Netcell Revolution RAID
PATA controller.
@@ -864,7 +864,7 @@ config PATA_OLDPIIX
config PATA_OPTIDMA
tristate "OPTI FireStar PATA support (Very Experimental)"
- depends on PCI
+ depends on LEGACY_PCI
help
This option enables DMA/PIO support for the later OPTi
controllers found on some old motherboards and in some
@@ -874,7 +874,7 @@ config PATA_OPTIDMA
config PATA_PDC2027X
tristate "Promise PATA 2027x support"
- depends on PCI
+ depends on LEGACY_PCI
help
This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
@@ -882,7 +882,7 @@ config PATA_PDC2027X
config PATA_PDC_OLD
tristate "Older Promise PATA controller support"
- depends on PCI
+ depends on LEGACY_PCI
help
This option enables support for the Promise 20246, 20262, 20263,
20265 and 20267 adapters.
@@ -910,7 +910,7 @@ config PATA_RDC
config PATA_SC1200
tristate "SC1200 PATA support"
- depends on PCI && (X86_32 || COMPILE_TEST)
+ depends on LEGACY_PCI && (X86_32 || COMPILE_TEST)
help
This option enables support for the NatSemi/AMD SC1200 SoC
companion chip used with the Geode processor family.
@@ -928,7 +928,7 @@ config PATA_SCH
config PATA_SERVERWORKS
tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
- depends on PCI
+ depends on LEGACY_PCI
help
This option enables support for the Serverworks OSB4/CSB5/CSB6 and
HT1000 PATA controllers, via the new ATA layer.
@@ -1005,7 +1005,7 @@ comment "PIO-only SFF controllers"
config PATA_CMD640_PCI
tristate "CMD640 PCI PATA support (Experimental)"
- depends on PCI
+ depends on LEGACY_PCI
select PATA_TIMINGS
help
This option enables support for the CMD640 PCI IDE
@@ -1086,7 +1086,7 @@ config PATA_NS87410
config PATA_OPTI
tristate "OPTI621/6215 PATA support (Very Experimental)"
- depends on PCI
+ depends on LEGACY_PCI
help
This option enables full PIO support for the early Opti ATA
controllers found on some old motherboards.
@@ -1197,7 +1197,7 @@ config ATA_GENERIC
config PATA_LEGACY
tristate "Legacy ISA PATA support (Experimental)"
- depends on (ISA || PCI)
+ depends on (ISA || LEGACY_PCI)
select PATA_TIMINGS
help
This option enables support for ISA/VLB/PCI bus legacy PATA
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 20a32e4d501d..791942217e2c 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -197,7 +197,8 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id
if (!(command & PCI_COMMAND_IO))
return -ENODEV;
- if (dev->vendor == PCI_VENDOR_ID_AL)
+ if (IS_ENABLED(CONFIG_LEGACY_PCI) &&
+ dev->vendor == PCI_VENDOR_ID_AL)
ata_pci_bmdma_clear_simplex(dev);
if (dev->vendor == PCI_VENDOR_ID_ATI) {
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index b71ea4a680b0..636848ab6839 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -3107,6 +3107,7 @@ EXPORT_SYMBOL_GPL(ata_bmdma_port_start32);
#ifdef CONFIG_PCI
+#ifdef CONFIG_LEGACY_PCI
/**
* ata_pci_bmdma_clear_simplex - attempt to kick device out of simplex
* @pdev: PCI device
@@ -3132,6 +3133,7 @@ int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev)
return 0;
}
EXPORT_SYMBOL_GPL(ata_pci_bmdma_clear_simplex);
+#endif
static void ata_bmdma_nodma(struct ata_host *host, const char *reason)
{
diff --git a/drivers/comedi/Kconfig b/drivers/comedi/Kconfig
index 3cb61fa2c5c3..1b642716c5d3 100644
--- a/drivers/comedi/Kconfig
+++ b/drivers/comedi/Kconfig
@@ -572,6 +572,7 @@ if COMEDI_PCI_DRIVERS
config COMEDI_8255_PCI
tristate "Generic PCI based 8255 digital i/o board support"
+ depends on LEGACY_PCI
select COMEDI_8255
help
Enable support for PCI based 8255 digital i/o boards. This driver
@@ -589,6 +590,7 @@ config COMEDI_8255_PCI
config COMEDI_ADDI_WATCHDOG
tristate
+ depends on LEGACY_PCI
help
Provides support for the watchdog subdevice found on many ADDI-DATA
boards. This module will be automatically selected when needed. The
@@ -596,6 +598,7 @@ config COMEDI_ADDI_WATCHDOG
config COMEDI_ADDI_APCI_1032
tristate "ADDI-DATA APCI_1032 support"
+ depends on LEGACY_PCI
help
Enable support for ADDI-DATA APCI_1032 cards
@@ -604,6 +607,7 @@ config COMEDI_ADDI_APCI_1032
config COMEDI_ADDI_APCI_1500
tristate "ADDI-DATA APCI_1500 support"
+ depends on LEGACY_PCI
help
Enable support for ADDI-DATA APCI_1500 cards
@@ -612,6 +616,7 @@ config COMEDI_ADDI_APCI_1500
config COMEDI_ADDI_APCI_1516
tristate "ADDI-DATA APCI-1016/1516/2016 support"
+ depends on LEGACY_PCI
select COMEDI_ADDI_WATCHDOG
help
Enable support for ADDI-DATA APCI-1016, APCI-1516 and APCI-2016 boards.
@@ -623,6 +628,7 @@ config COMEDI_ADDI_APCI_1516
config COMEDI_ADDI_APCI_1564
tristate "ADDI-DATA APCI_1564 support"
+ depends on LEGACY_PCI
select COMEDI_ADDI_WATCHDOG
help
Enable support for ADDI-DATA APCI_1564 cards
@@ -632,6 +638,7 @@ config COMEDI_ADDI_APCI_1564
config COMEDI_ADDI_APCI_16XX
tristate "ADDI-DATA APCI_16xx support"
+ depends on LEGACY_PCI
help
Enable support for ADDI-DATA APCI_16xx cards
@@ -640,6 +647,7 @@ config COMEDI_ADDI_APCI_16XX
config COMEDI_ADDI_APCI_2032
tristate "ADDI-DATA APCI_2032 support"
+ depends on LEGACY_PCI
select COMEDI_ADDI_WATCHDOG
help
Enable support for ADDI-DATA APCI_2032 cards
@@ -649,6 +657,7 @@ config COMEDI_ADDI_APCI_2032
config COMEDI_ADDI_APCI_2200
tristate "ADDI-DATA APCI_2200 support"
+ depends on LEGACY_PCI
select COMEDI_ADDI_WATCHDOG
help
Enable support for ADDI-DATA APCI_2200 cards
@@ -658,6 +667,7 @@ config COMEDI_ADDI_APCI_2200
config COMEDI_ADDI_APCI_3120
tristate "ADDI-DATA APCI_3120/3001 support"
+ depends on LEGACY_PCI
depends on HAS_DMA
help
Enable support for ADDI-DATA APCI_3120/3001 cards
@@ -667,6 +677,7 @@ config COMEDI_ADDI_APCI_3120
config COMEDI_ADDI_APCI_3501
tristate "ADDI-DATA APCI_3501 support"
+ depends on LEGACY_PCI
help
Enable support for ADDI-DATA APCI_3501 cards
@@ -675,6 +686,7 @@ config COMEDI_ADDI_APCI_3501
config COMEDI_ADDI_APCI_3XXX
tristate "ADDI-DATA APCI_3xxx support"
+ depends on LEGACY_PCI
help
Enable support for ADDI-DATA APCI_3xxx cards
@@ -683,6 +695,7 @@ config COMEDI_ADDI_APCI_3XXX
config COMEDI_ADL_PCI6208
tristate "ADLink PCI-6208A support"
+ depends on LEGACY_PCI
help
Enable support for ADLink PCI-6208A cards
@@ -691,6 +704,7 @@ config COMEDI_ADL_PCI6208
config COMEDI_ADL_PCI7X3X
tristate "ADLink PCI-723X/743X isolated digital i/o board support"
+ depends on LEGACY_PCI
help
Enable support for ADlink PCI-723X/743X isolated digital i/o boards.
Supported boards include the 32-channel PCI-7230 (16 in/16 out),
@@ -702,6 +716,7 @@ config COMEDI_ADL_PCI7X3X
config COMEDI_ADL_PCI8164
tristate "ADLink PCI-8164 4 Axes Motion Control board support"
+ depends on LEGACY_PCI
help
Enable support for ADlink PCI-8164 4 Axes Motion Control board
@@ -710,6 +725,7 @@ config COMEDI_ADL_PCI8164
config COMEDI_ADL_PCI9111
tristate "ADLink PCI-9111HR support"
+ depends on LEGACY_PCI
select COMEDI_8254
help
Enable support for ADlink PCI9111 cards
@@ -719,6 +735,7 @@ config COMEDI_ADL_PCI9111
config COMEDI_ADL_PCI9118
tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
+ depends on LEGACY_PCI
depends on HAS_DMA
select COMEDI_8254
help
@@ -729,6 +746,7 @@ config COMEDI_ADL_PCI9118
config COMEDI_ADV_PCI1710
tristate "Advantech PCI-171x and PCI-1731 support"
+ depends on LEGACY_PCI
select COMEDI_8254
help
Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711,
@@ -739,6 +757,7 @@ config COMEDI_ADV_PCI1710
config COMEDI_ADV_PCI1720
tristate "Advantech PCI-1720 support"
+ depends on LEGACY_PCI
help
Enable support for Advantech PCI-1720 Analog Output board.
@@ -747,6 +766,7 @@ config COMEDI_ADV_PCI1720
config COMEDI_ADV_PCI1723
tristate "Advantech PCI-1723 support"
+ depends on LEGACY_PCI
help
Enable support for Advantech PCI-1723 cards
@@ -755,6 +775,7 @@ config COMEDI_ADV_PCI1723
config COMEDI_ADV_PCI1724
tristate "Advantech PCI-1724U support"
+ depends on LEGACY_PCI
help
Enable support for Advantech PCI-1724U cards. These are 32-channel
analog output cards with voltage and current loop output ranges and
@@ -765,6 +786,7 @@ config COMEDI_ADV_PCI1724
config COMEDI_ADV_PCI1760
tristate "Advantech PCI-1760 support"
+ depends on LEGACY_PCI
help
Enable support for Advantech PCI-1760 board.
@@ -773,6 +795,7 @@ config COMEDI_ADV_PCI1760
config COMEDI_ADV_PCI_DIO
tristate "Advantech PCI DIO card support"
+ depends on LEGACY_PCI
select COMEDI_8254
select COMEDI_8255
help
@@ -786,6 +809,7 @@ config COMEDI_ADV_PCI_DIO
config COMEDI_AMPLC_DIO200_PCI
tristate "Amplicon PCI215/PCI272/PCIe215/PCIe236/PCIe296 DIO support"
+ depends on LEGACY_PCI
select COMEDI_AMPLC_DIO200
help
Enable support for Amplicon PCI215, PCI272, PCIe215, PCIe236
@@ -796,6 +820,7 @@ config COMEDI_AMPLC_DIO200_PCI
config COMEDI_AMPLC_PC236_PCI
tristate "Amplicon PCI236 DIO board support"
+ depends on LEGACY_PCI
select COMEDI_AMPLC_PC236
help
Enable support for Amplicon PCI236 DIO board.
@@ -805,6 +830,7 @@ config COMEDI_AMPLC_PC236_PCI
config COMEDI_AMPLC_PC263_PCI
tristate "Amplicon PCI263 relay board support"
+ depends on LEGACY_PCI
help
Enable support for Amplicon PCI263 relay board. This is a PCI board
with 16 reed relay output channels.
@@ -814,6 +840,7 @@ config COMEDI_AMPLC_PC263_PCI
config COMEDI_AMPLC_PCI224
tristate "Amplicon PCI224 and PCI234 support"
+ depends on LEGACY_PCI
select COMEDI_8254
help
Enable support for Amplicon PCI224 and PCI234 AO boards
@@ -823,6 +850,7 @@ config COMEDI_AMPLC_PCI224
config COMEDI_AMPLC_PCI230
tristate "Amplicon PCI230 and PCI260 support"
+ depends on LEGACY_PCI
select COMEDI_8254
select COMEDI_8255
help
@@ -834,6 +862,7 @@ config COMEDI_AMPLC_PCI230
config COMEDI_CONTEC_PCI_DIO
tristate "Contec PIO1616L digital I/O board support"
+ depends on LEGACY_PCI
help
Enable support for the Contec PIO1616L digital I/O board
@@ -842,6 +871,7 @@ config COMEDI_CONTEC_PCI_DIO
config COMEDI_DAS08_PCI
tristate "DAS-08 PCI support"
+ depends on LEGACY_PCI
select COMEDI_DAS08
help
Enable support for PCI DAS-08 cards.
@@ -861,6 +891,7 @@ config COMEDI_DT3000
config COMEDI_DYNA_PCI10XX
tristate "Dynalog PCI DAQ series support"
+ depends on LEGACY_PCI
help
Enable support for Dynalog PCI DAQ series
PCI-1050
@@ -894,6 +925,7 @@ config COMEDI_ICP_MULTI
config COMEDI_DAQBOARD2000
tristate "IOtech DAQboard/2000 support"
+ depends on LEGACY_PCI
select COMEDI_8255
help
Enable support for the IOtech DAQboard/2000
@@ -911,6 +943,7 @@ config COMEDI_JR3_PCI
config COMEDI_KE_COUNTER
tristate "Kolter-Electronic PCI Counter 1 card support"
+ depends on LEGACY_PCI
help
Enable support for Kolter-Electronic PCI Counter 1 cards
@@ -919,6 +952,7 @@ config COMEDI_KE_COUNTER
config COMEDI_CB_PCIDAS64
tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support"
+ depends on LEGACY_PCI
select COMEDI_8255
help
Enable support for ComputerBoards/MeasurementComputing PCI-DAS 64xx,
@@ -929,6 +963,7 @@ config COMEDI_CB_PCIDAS64
config COMEDI_CB_PCIDAS
tristate "MeasurementComputing PCI-DAS support"
+ depends on LEGACY_PCI
select COMEDI_8254
select COMEDI_8255
help
@@ -942,6 +977,7 @@ config COMEDI_CB_PCIDAS
config COMEDI_CB_PCIDDA
tristate "MeasurementComputing PCI-DDA series support"
+ depends on LEGACY_PCI
select COMEDI_8255
help
Enable support for ComputerBoards/MeasurementComputing PCI-DDA
@@ -953,6 +989,7 @@ config COMEDI_CB_PCIDDA
config COMEDI_CB_PCIMDAS
tristate "MeasurementComputing PCIM-DAS1602/16, PCIe-DAS1602/16 support"
+ depends on LEGACY_PCI
select COMEDI_8254
select COMEDI_8255
help
@@ -964,6 +1001,7 @@ config COMEDI_CB_PCIMDAS
config COMEDI_CB_PCIMDDA
tristate "MeasurementComputing PCIM-DDA06-16 support"
+ depends on LEGACY_PCI
select COMEDI_8255
help
Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16
@@ -973,6 +1011,7 @@ config COMEDI_CB_PCIMDDA
config COMEDI_ME4000
tristate "Meilhaus ME-4000 support"
+ depends on LEGACY_PCI
select COMEDI_8254
help
Enable support for Meilhaus PCI data acquisition cards
@@ -1031,6 +1070,7 @@ config COMEDI_NI_670X
config COMEDI_NI_LABPC_PCI
tristate "NI Lab-PC PCI-1200 support"
+ depends on LEGACY_PCI
select COMEDI_NI_LABPC
help
Enable support for National Instruments Lab-PC PCI-1200.
@@ -1040,6 +1080,7 @@ config COMEDI_NI_LABPC_PCI
config COMEDI_NI_PCIDIO
tristate "NI PCI-DIO32HS, PCI-6533, PCI-6534 support"
+ depends on LEGACY_PCI
depends on HAS_DMA
select COMEDI_MITE
select COMEDI_8255
@@ -1052,6 +1093,7 @@ config COMEDI_NI_PCIDIO
config COMEDI_NI_PCIMIO
tristate "NI PCI-MIO-E series and M series support"
+ depends on LEGACY_PCI
depends on HAS_DMA
select COMEDI_NI_TIOCMD
select COMEDI_8255
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 60d9374c72c0..d36afa5ac6fc 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -687,7 +687,7 @@ config GPIO_VR41XX
config GPIO_VX855
tristate "VIA VX855/VX875 GPIO"
- depends on (X86 || COMPILE_TEST) && PCI
+ depends on (X86 || COMPILE_TEST) && LEGACY_PCI
select MFD_CORE
select MFD_VX855
help
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 64bd3dfba2c4..09397562c396 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1654,7 +1654,7 @@ config SENSORS_S3C_RAW
config SENSORS_SIS5595
tristate "Silicon Integrated Systems Corp. SiS5595"
- depends on PCI
+ depends on LEGACY_PCI
help
If you say yes here you get support for the integrated sensors in
SiS5595 South Bridges.
@@ -1985,7 +1985,7 @@ config SENSORS_VIA_CPUTEMP
config SENSORS_VIA686A
tristate "VIA686A"
- depends on PCI
+ depends on LEGACY_PCI
help
If you say yes here you get support for the integrated sensors in
Via 686A/B South Bridges.
@@ -2006,7 +2006,7 @@ config SENSORS_VT1211
config SENSORS_VT8231
tristate "VIA VT8231"
- depends on PCI
+ depends on LEGACY_PCI
select HWMON_VID
help
If you say yes here then you get support for the integrated sensors
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index dce392839017..a8d6274dc965 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -11,7 +11,7 @@ comment "PC SMBus host controller drivers"
config I2C_ALI1535
tristate "ALI 1535"
- depends on PCI
+ depends on LEGACY_PCI
help
If you say yes to this option, support will be included for the SMB
Host controller on Acer Labs Inc. (ALI) M1535 South Bridges. The SMB
@@ -23,7 +23,7 @@ config I2C_ALI1535
config I2C_ALI1563
tristate "ALI 1563"
- depends on PCI
+ depends on LEGACY_PCI
help
If you say yes to this option, support will be included for the SMB
Host controller on Acer Labs Inc. (ALI) M1563 South Bridges. The SMB
@@ -35,7 +35,7 @@ config I2C_ALI1563
config I2C_ALI15X3
tristate "ALI 15x3"
- depends on PCI
+ depends on LEGACY_PCI
help
If you say yes to this option, support will be included for the
Acer Labs Inc. (ALI) M1514 and M1543 motherboard I2C interfaces.
@@ -45,7 +45,7 @@ config I2C_ALI15X3
config I2C_AMD756
tristate "AMD 756/766/768/8111 and nVidia nForce"
- depends on PCI
+ depends on LEGACY_PCI
help
If you say yes to this option, support will be included for the AMD
756/766/768 mainboard I2C interfaces. The driver also includes
@@ -70,7 +70,7 @@ config I2C_AMD756_S4882
config I2C_AMD8111
tristate "AMD 8111"
- depends on PCI
+ depends on LEGACY_PCI
help
If you say yes to this option, support will be included for the
second (SMBus 2.0) AMD 8111 mainboard I2C interface.
@@ -154,7 +154,7 @@ config I2C_I801
config I2C_ISCH
tristate "Intel SCH SMBus 1.0"
- depends on PCI
+ depends on LEGACY_PCI
select LPC_SCH
help
Say Y here if you want to use SMBus controller on the Intel SCH
@@ -221,7 +221,7 @@ config I2C_CHT_WC
config I2C_NFORCE2
tristate "Nvidia nForce2, nForce3 and nForce4"
- depends on PCI
+ depends on LEGACY_PCI
help
If you say yes to this option, support will be included for the Nvidia
nForce2, nForce3 and nForce4 families of mainboard I2C interfaces.
@@ -253,7 +253,7 @@ config I2C_NVIDIA_GPU
config I2C_SIS5595
tristate "SiS 5595"
- depends on PCI
+ depends on LEGACY_PCI
help
If you say yes to this option, support will be included for the
SiS5595 SMBus (a subset of I2C) interface.
@@ -263,7 +263,7 @@ config I2C_SIS5595
config I2C_SIS630
tristate "SiS 630/730/964"
- depends on PCI
+ depends on LEGACY_PCI
help
If you say yes to this option, support will be included for the
SiS630, SiS730 and SiS964 SMBus (a subset of I2C) interface.
@@ -273,7 +273,7 @@ config I2C_SIS630
config I2C_SIS96X
tristate "SiS 96x"
- depends on PCI
+ depends on LEGACY_PCI
help
If you say yes to this option, support will be included for the SiS
96x SMBus (a subset of I2C) interfaces. Specifically, the following
@@ -291,7 +291,7 @@ config I2C_SIS96X
config I2C_VIA
tristate "VIA VT82C586B"
- depends on PCI
+ depends on LEGACY_PCI
select I2C_ALGOBIT
help
If you say yes to this option, support will be included for the VIA
@@ -302,7 +302,7 @@ config I2C_VIA
config I2C_VIAPRO
tristate "VIA VT82C596/82C686/82xx and CX700/VX8xx/VX900"
- depends on PCI
+ depends on LEGACY_PCI
help
If you say yes to this option, support will be included for the VIA
VT82C596 and later SMBus interface. Specifically, the following
diff --git a/drivers/input/gameport/Kconfig b/drivers/input/gameport/Kconfig
index 5a2c2fb3217d..082280f95333 100644
--- a/drivers/input/gameport/Kconfig
+++ b/drivers/input/gameport/Kconfig
@@ -43,7 +43,7 @@ config GAMEPORT_L4
config GAMEPORT_EMU10K1
tristate "SB Live and Audigy gameport support"
- depends on PCI
+ depends on LEGACY_PCI
help
Say Y here if you have a SoundBlaster Live! or SoundBlaster
Audigy card and want to use its gameport.
@@ -53,7 +53,7 @@ config GAMEPORT_EMU10K1
config GAMEPORT_FM801
tristate "ForteMedia FM801 gameport support"
- depends on PCI
+ depends on LEGACY_PCI
help
Say Y here if you have ForteMedia FM801 PCI audio controller
(Abit AU10, Genius Sound Maker, HP Workstation zx2000,
diff --git a/drivers/isdn/hardware/mISDN/Kconfig b/drivers/isdn/hardware/mISDN/Kconfig
index 078eeadf707a..2c5e16483179 100644
--- a/drivers/isdn/hardware/mISDN/Kconfig
+++ b/drivers/isdn/hardware/mISDN/Kconfig
@@ -7,14 +7,14 @@ comment "mISDN hardware drivers"
config MISDN_HFCPCI
tristate "Support for HFC PCI cards"
depends on MISDN
- depends on PCI
+ depends on LEGACY_PCI
help
Enable support for cards with Cologne Chip AG's
HFC PCI chip.
config MISDN_HFCMULTI
tristate "Support for HFC multiport cards (HFC-4S/8S/E1)"
- depends on PCI || CPM1
+ depends on LEGACY_PCI || CPM1
depends on MISDN
help
Enable support for cards with Cologne Chip AG's HFC multiport
@@ -43,7 +43,7 @@ config MISDN_HFCUSB
config MISDN_AVMFRITZ
tristate "Support for AVM FRITZ!CARD PCI"
depends on MISDN
- depends on PCI
+ depends on LEGACY_PCI
select MISDN_IPAC
help
Enable support for AVMs FRITZ!CARD PCI cards
@@ -51,7 +51,7 @@ config MISDN_AVMFRITZ
config MISDN_SPEEDFAX
tristate "Support for Sedlbauer Speedfax+"
depends on MISDN
- depends on PCI
+ depends on LEGACY_PCI
select MISDN_IPAC
select MISDN_ISAR
help
@@ -60,7 +60,7 @@ config MISDN_SPEEDFAX
config MISDN_INFINEON
tristate "Support for cards with Infineon chipset"
depends on MISDN
- depends on PCI
+ depends on LEGACY_PCI
select MISDN_IPAC
help
Enable support for cards with ISAC + HSCX, IPAC or IPAC-SX
@@ -69,14 +69,14 @@ config MISDN_INFINEON
config MISDN_W6692
tristate "Support for cards with Winbond 6692"
depends on MISDN
- depends on PCI
+ depends on LEGACY_PCI
help
Enable support for Winbond 6692 PCI chip based cards.
config MISDN_NETJET
tristate "Support for NETJet cards"
depends on MISDN
- depends on PCI
+ depends on LEGACY_PCI
depends on TTY
select MISDN_IPAC
select MISDN_HDLC
diff --git a/drivers/media/cec/platform/Kconfig b/drivers/media/cec/platform/Kconfig
index b672d3142eb7..5e92ece5b104 100644
--- a/drivers/media/cec/platform/Kconfig
+++ b/drivers/media/cec/platform/Kconfig
@@ -100,7 +100,7 @@ config CEC_TEGRA
config CEC_SECO
tristate "SECO Boards HDMI CEC driver"
depends on (X86 || IA64) || COMPILE_TEST
- depends on PCI && DMI
+ depends on LEGACY_PCI && DMI
select CEC_CORE
select CEC_NOTIFIER
help
diff --git a/drivers/media/pci/dm1105/Kconfig b/drivers/media/pci/dm1105/Kconfig
index e0e3af67c99c..9ecab93685d4 100644
--- a/drivers/media/pci/dm1105/Kconfig
+++ b/drivers/media/pci/dm1105/Kconfig
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config DVB_DM1105
tristate "SDMC DM1105 based PCI cards"
- depends on DVB_CORE && PCI && I2C && I2C_ALGOBIT
+ depends on DVB_CORE && LEGACY_PCI && I2C && I2C_ALGOBIT
select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT
select DVB_STV0288 if MEDIA_SUBDRV_AUTOSELECT
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index d29e29645e04..32eb73993998 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -67,7 +67,7 @@ config USB_DSBR
config RADIO_MAXIRADIO
tristate "Guillemot MAXI Radio FM 2000 radio"
- depends on VIDEO_V4L2 && PCI
+ depends on VIDEO_V4L2 && LEGACY_PCI
select RADIO_TEA575X
help
Choose Y here if you have this radio card. This card may also be
diff --git a/drivers/message/fusion/Kconfig b/drivers/message/fusion/Kconfig
index a3d0288fd0e2..cec5995e1911 100644
--- a/drivers/message/fusion/Kconfig
+++ b/drivers/message/fusion/Kconfig
@@ -2,7 +2,7 @@
menuconfig FUSION
bool "Fusion MPT device support"
- depends on PCI
+ depends on LEGACY_PCI
help
Say Y here to get to see options for Fusion Message
Passing Technology (MPT) drivers.
@@ -14,7 +14,7 @@ if FUSION
config FUSION_SPI
tristate "Fusion MPT ScsiHost drivers for SPI"
- depends on PCI && SCSI
+ depends on LEGACY_PCI && SCSI
select SCSI_SPI_ATTRS
help
SCSI HOST support for a parallel SCSI host adapters.
@@ -29,7 +29,7 @@ config FUSION_SPI
config FUSION_FC
tristate "Fusion MPT ScsiHost drivers for FC"
- depends on PCI && SCSI
+ depends on LEGACY_PCI && SCSI
depends on SCSI_FC_ATTRS
help
SCSI HOST support for a Fiber Channel host adapters.
@@ -48,7 +48,7 @@ config FUSION_FC
config FUSION_SAS
tristate "Fusion MPT ScsiHost drivers for SAS"
- depends on PCI && SCSI
+ depends on LEGACY_PCI && SCSI
select SCSI_SAS_ATTRS
help
SCSI HOST support for a SAS host adapters.
diff --git a/drivers/net/arcnet/Kconfig b/drivers/net/arcnet/Kconfig
index a51b9dab6d3a..b8038287c4f2 100644
--- a/drivers/net/arcnet/Kconfig
+++ b/drivers/net/arcnet/Kconfig
@@ -4,7 +4,7 @@
#
menuconfig ARCNET
- depends on NETDEVICES && (ISA || PCI || PCMCIA)
+ depends on NETDEVICES && (ISA || LEGACY_PCI || PCMCIA)
tristate "ARCnet support"
help
If you have a network card of this type, say Y and check out the
diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
index a4130e643342..0fa43943ea74 100644
--- a/drivers/net/ethernet/8390/Kconfig
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -117,7 +117,7 @@ config NE2000
config NE2K_PCI
tristate "PCI NE2000 and clones support (see help)"
- depends on PCI
+ depends on LEGACY_PCI
select CRC32
help
This driver is for NE2000 compatible PCI cards. It will not work
diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig
index 899c8a2a34b6..0ac61a5f1a37 100644
--- a/drivers/net/ethernet/amd/Kconfig
+++ b/drivers/net/ethernet/amd/Kconfig
@@ -56,7 +56,7 @@ config LANCE
config PCNET32
tristate "AMD PCnet32 PCI support"
- depends on PCI
+ depends on LEGACY_PCI
select CRC32
select MII
help
diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
index 0b274d8fa45b..45a3c42945fc 100644
--- a/drivers/net/ethernet/intel/Kconfig
+++ b/drivers/net/ethernet/intel/Kconfig
@@ -18,7 +18,7 @@ if NET_VENDOR_INTEL
config E100
tristate "Intel(R) PRO/100+ support"
- depends on PCI
+ depends on LEGACY_PCI
select MII
help
This driver supports Intel(R) PRO/100 family of adapters.
@@ -41,7 +41,7 @@ config E100
config E1000
tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
- depends on PCI
+ depends on LEGACY_PCI
help
This driver supports Intel(R) PRO/1000 gigabit ethernet family of
adapters. For more information on how to identify your adapter, go
diff --git a/drivers/net/ethernet/sis/Kconfig b/drivers/net/ethernet/sis/Kconfig
index 775d76d9890e..bd1b1b81b0e8 100644
--- a/drivers/net/ethernet/sis/Kconfig
+++ b/drivers/net/ethernet/sis/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_SIS
bool "Silicon Integrated Systems (SiS) devices"
default y
- depends on PCI
+ depends on LEGACY_PCI
help
If you have a network (Ethernet) card belonging to this class, say Y.
@@ -19,7 +19,7 @@ if NET_VENDOR_SIS
config SIS900
tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
- depends on PCI
+ depends on LEGACY_PCI
select CRC32
select MII
help
@@ -35,7 +35,7 @@ config SIS900
config SIS190
tristate "SiS190/SiS191 gigabit ethernet support"
- depends on PCI
+ depends on LEGACY_PCI
select CRC32
select MII
help
diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
index affcf92cd3aa..8b1d67b00e68 100644
--- a/drivers/net/ethernet/ti/Kconfig
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_TI
bool "Texas Instruments (TI) devices"
default y
- depends on PCI || EISA || AR7 || ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3
+ depends on LEGACY_PCI || EISA || AR7 || ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3
help
If you have a network (Ethernet) card belonging to this class, say Y.
@@ -159,7 +159,7 @@ config TI_KEYSTONE_NETCP_ETHSS
config TLAN
tristate "TI ThunderLAN support"
- depends on (PCI || EISA)
+ depends on (LEGACY_PCI || EISA)
help
If you have a PCI Ethernet network card based on the ThunderLAN chip
which is supported by this driver, say Y here.
diff --git a/drivers/net/ethernet/via/Kconfig b/drivers/net/ethernet/via/Kconfig
index da287ef65be7..0ca7d8f7bfde 100644
--- a/drivers/net/ethernet/via/Kconfig
+++ b/drivers/net/ethernet/via/Kconfig
@@ -18,8 +18,8 @@ if NET_VENDOR_VIA
config VIA_RHINE
tristate "VIA Rhine support"
- depends on PCI || (OF_IRQ && GENERIC_PCI_IOMAP)
- depends on PCI || ARCH_VT8500 || COMPILE_TEST
+ depends on LEGACY_PCI || (OF_IRQ && GENERIC_PCI_IOMAP)
+ depends on LEGACY_PCI || ARCH_VT8500 || COMPILE_TEST
depends on HAS_DMA
select CRC32
select MII
diff --git a/drivers/net/fddi/Kconfig b/drivers/net/fddi/Kconfig
index 846bf41c2717..1753c08d6423 100644
--- a/drivers/net/fddi/Kconfig
+++ b/drivers/net/fddi/Kconfig
@@ -5,7 +5,7 @@
config FDDI
tristate "FDDI driver support"
- depends on PCI || EISA || TC
+ depends on LEGACY_PCI || EISA || TC
help
Fiber Distributed Data Interface is a high speed local area network
design; essentially a replacement for high speed Ethernet. FDDI can
@@ -29,7 +29,7 @@ config DEFZA
config DEFXX
tristate "Digital DEFTA/DEFEA/DEFPA adapter support"
- depends on FDDI && (PCI || EISA || TC)
+ depends on FDDI && (LEGACY_PCI || EISA || TC)
help
This is support for the DIGITAL series of TURBOchannel (DEFTA),
EISA (DEFEA) and PCI (DEFPA) controllers which can connect you
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 592a8389fc5a..631c4c1c56c8 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -250,7 +250,7 @@ config C101
config FARSYNC
tristate "FarSync T-Series support"
- depends on HDLC && PCI
+ depends on HDLC && LEGACY_PCI
help
Support for the FarSync T-Series X.21 (and V.35/V.24) cards by
FarSite Communications Ltd.
diff --git a/drivers/net/wireless/atmel/Kconfig b/drivers/net/wireless/atmel/Kconfig
index ca45a1021cf4..9baa4a19dd38 100644
--- a/drivers/net/wireless/atmel/Kconfig
+++ b/drivers/net/wireless/atmel/Kconfig
@@ -14,7 +14,7 @@ if WLAN_VENDOR_ATMEL
config ATMEL
tristate "Atmel at76c50x chipset 802.11b support"
- depends on CFG80211 && (PCI || PCMCIA)
+ depends on CFG80211 && (LEGACY_PCI || PCMCIA)
select WIRELESS_EXT
select WEXT_PRIV
select FW_LOADER
@@ -32,7 +32,7 @@ config ATMEL
config PCI_ATMEL
tristate "Atmel at76c506 PCI cards"
- depends on ATMEL && PCI
+ depends on ATMEL && LEGACY_PCI
help
Enable support for PCI and mini-PCI cards containing the
Atmel at76c506 chip.
diff --git a/drivers/net/wireless/intersil/hostap/Kconfig b/drivers/net/wireless/intersil/hostap/Kconfig
index c865d3156cea..9bcd1c8546ff 100644
--- a/drivers/net/wireless/intersil/hostap/Kconfig
+++ b/drivers/net/wireless/intersil/hostap/Kconfig
@@ -56,7 +56,7 @@ config HOSTAP_FIRMWARE_NVRAM
config HOSTAP_PLX
tristate "Host AP driver for Prism2/2.5/3 in PLX9052 PCI adaptors"
- depends on PCI && HOSTAP
+ depends on LEGACY_PCI && HOSTAP
help
Host AP driver's version for Prism2/2.5/3 PC Cards in PLX9052 based
PCI adaptors.
@@ -70,7 +70,7 @@ config HOSTAP_PLX
config HOSTAP_PCI
tristate "Host AP driver for Prism2.5 PCI adaptors"
- depends on PCI && HOSTAP
+ depends on LEGACY_PCI && HOSTAP
help
Host AP driver's version for Prism2.5 PCI adaptors.
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 43e615aa12ff..e0c99ddc145c 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -23,6 +23,17 @@ menuconfig PCI
if PCI
+config LEGACY_PCI
+ bool "Enable support for legacy PCI devices"
+ depends on HAVE_PCI
+ help
+ This option enables support for legacy PCI devices. This includes
+ PCI devices attached directly or via a bridge on a PCI Express bus.
+ It also includes compatibility features on PCI Express devices which
+ make use of legacy I/O spaces.
+
+ For maximum compatibility with old hardware say 'Y'
+
config PCI_DOMAINS
bool
depends on PCI
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 6e3a04107bb6..5436b2be2c73 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -333,7 +333,7 @@ config SGIWD93_SCSI
config BLK_DEV_3W_XXXX_RAID
tristate "3ware 5/6/7/8xxx ATA-RAID support"
- depends on PCI && SCSI
+ depends on LEGACY_PCI && SCSI
help
3ware is the only hardware ATA-Raid product in Linux to date.
This card is 2,4, or 8 channel master mode support only.
@@ -380,7 +380,7 @@ config SCSI_3W_SAS
config SCSI_ACARD
tristate "ACARD SCSI support"
- depends on PCI && SCSI
+ depends on LEGACY_PCI && SCSI
help
This driver supports the ACARD SCSI host adapter.
Support Chip <ATP870 ATP876 ATP880 ATP885>
@@ -472,7 +472,7 @@ config SCSI_DPT_I2O
config SCSI_ADVANSYS
tristate "AdvanSys SCSI support"
depends on SCSI
- depends on ISA || EISA || PCI
+ depends on ISA || EISA || LEGACY_PCI
depends on ISA_DMA_API || !ISA
help
This is a driver for all SCSI host adapters manufactured by
@@ -643,7 +643,7 @@ config SCSI_SNIC_DEBUG_FS
config SCSI_DMX3191D
tristate "DMX3191D SCSI support"
- depends on PCI && SCSI
+ depends on LEGACY_PCI && SCSI
select SCSI_SPI_ATTRS
help
This is support for Domex DMX3191D SCSI Host Adapters.
@@ -657,7 +657,7 @@ config SCSI_FDOMAIN
config SCSI_FDOMAIN_PCI
tristate "Future Domain TMC-3260/AHA-2920A PCI SCSI support"
- depends on PCI && SCSI
+ depends on LEGACY_PCI && SCSI
select SCSI_FDOMAIN
help
This is support for Future Domain's PCI SCSI host adapters (TMC-3260)
@@ -710,7 +710,7 @@ config SCSI_GENERIC_NCR5380
config SCSI_IPS
tristate "IBM ServeRAID support"
- depends on PCI && SCSI
+ depends on LEGACY_PCI && SCSI
help
This is support for the IBM ServeRAID hardware RAID controllers.
See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html>
@@ -770,7 +770,7 @@ config SCSI_IBMVFC_TRACE
config SCSI_INITIO
tristate "Initio 9100U(W) support"
- depends on PCI && SCSI
+ depends on LEGACY_PCI && SCSI
help
This is support for the Initio 91XXU(W) SCSI host adapter. Please
read the SCSI-HOWTO, available from
@@ -781,7 +781,7 @@ config SCSI_INITIO
config SCSI_INIA100
tristate "Initio INI-A100U2W support"
- depends on PCI && SCSI
+ depends on LEGACY_PCI && SCSI
help
This is support for the Initio INI-A100U2W SCSI host adapter.
Please read the SCSI-HOWTO, available from
@@ -1130,7 +1130,7 @@ config SCSI_QLOGIC_FAS
config SCSI_QLOGIC_1280
tristate "Qlogic QLA 1240/1x80/1x160 SCSI support"
- depends on PCI && SCSI
+ depends on LEGACY_PCI && SCSI
help
Say Y if you have a QLogic ISP1240/1x80/1x160 SCSI host adapter.
@@ -1187,7 +1187,7 @@ config SCSI_SIM710
config SCSI_DC395x
tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support"
- depends on PCI && SCSI
+ depends on LEGACY_PCI && SCSI
select SCSI_SPI_ATTRS
help
This driver supports PCI SCSI host adapters based on the ASIC
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic79xx b/drivers/scsi/aic7xxx/Kconfig.aic79xx
index a47dbd500e9a..64332cc73ea0 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic79xx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic79xx
@@ -5,7 +5,7 @@
#
config SCSI_AIC79XX
tristate "Adaptec AIC79xx U320 support"
- depends on PCI && SCSI
+ depends on LEGACY_PCI && SCSI
select SCSI_SPI_ATTRS
help
This driver supports all of Adaptec's Ultra 320 PCI-X
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic7xxx b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
index 0cfd92ce750a..3fa5dc1d1186 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic7xxx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
@@ -5,7 +5,7 @@
#
config SCSI_AIC7XXX
tristate "Adaptec AIC7xxx Fast -> U160 support"
- depends on (PCI || EISA) && SCSI
+ depends on (LEGACY_PCI || EISA) && SCSI
select SCSI_SPI_ATTRS
help
This driver supports all of Adaptec's Fast through Ultra 160 PCI
diff --git a/drivers/scsi/aic94xx/Kconfig b/drivers/scsi/aic94xx/Kconfig
index 71931c371b1c..b0cbf65dbe5b 100644
--- a/drivers/scsi/aic94xx/Kconfig
+++ b/drivers/scsi/aic94xx/Kconfig
@@ -8,7 +8,7 @@
config SCSI_AIC94XX
tristate "Adaptec AIC94xx SAS/SATA support"
- depends on PCI
+ depends on LEGACY_PCI
select SCSI_SAS_LIBSAS
select FW_LOADER
help
diff --git a/drivers/scsi/megaraid/Kconfig.megaraid b/drivers/scsi/megaraid/Kconfig.megaraid
index 2adc2afd9f91..4ec46aede490 100644
--- a/drivers/scsi/megaraid/Kconfig.megaraid
+++ b/drivers/scsi/megaraid/Kconfig.megaraid
@@ -67,7 +67,7 @@ config MEGARAID_MAILBOX
config MEGARAID_LEGACY
tristate "LSI Logic Legacy MegaRAID Driver"
- depends on PCI && SCSI
+ depends on LEGACY_PCI && SCSI
help
This driver supports the LSI MegaRAID 418, 428, 438, 466, 762, 490
and 467 SCSI host adapters. This driver also support the all U320
diff --git a/drivers/scsi/mvsas/Kconfig b/drivers/scsi/mvsas/Kconfig
index 79812b80743b..f41f3f4a9f34 100644
--- a/drivers/scsi/mvsas/Kconfig
+++ b/drivers/scsi/mvsas/Kconfig
@@ -9,7 +9,7 @@
config SCSI_MVSAS
tristate "Marvell 88SE64XX/88SE94XX SAS/SATA support"
- depends on PCI
+ depends on LEGACY_PCI
select SCSI_SAS_LIBSAS
select FW_LOADER
help
diff --git a/drivers/scsi/qla2xxx/Kconfig b/drivers/scsi/qla2xxx/Kconfig
index 802c373fd6d9..93afb73858ce 100644
--- a/drivers/scsi/qla2xxx/Kconfig
+++ b/drivers/scsi/qla2xxx/Kconfig
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config SCSI_QLA_FC
tristate "QLogic QLA2XXX Fibre Channel Support"
- depends on PCI && SCSI
+ depends on LEGACY_PCI && SCSI
depends on SCSI_FC_ATTRS
depends on NVME_FC || !NVME_FC
select FW_LOADER
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 596705d24400..cfbd45767095 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -204,6 +204,7 @@ config SPI_BITBANG
config SPI_BUTTERFLY
tristate "Parallel port adapter for AVR Butterfly (DEVELOPMENT)"
depends on PARPORT
+ depends on HAS_IOPORT
select SPI_BITBANG
help
This uses a custom parallel port cable to connect to an AVR
diff --git a/drivers/staging/sm750fb/Kconfig b/drivers/staging/sm750fb/Kconfig
index 8c0d8a873d5b..d332f912b964 100644
--- a/drivers/staging/sm750fb/Kconfig
+++ b/drivers/staging/sm750fb/Kconfig
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
config FB_SM750
tristate "Silicon Motion SM750 framebuffer support"
- depends on FB && PCI
+ depends on FB && LEGACY_PCI
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
diff --git a/drivers/staging/vt6655/Kconfig b/drivers/staging/vt6655/Kconfig
index d1cd5de46dcf..dd236f54d3a2 100644
--- a/drivers/staging/vt6655/Kconfig
+++ b/drivers/staging/vt6655/Kconfig
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
config VT6655
tristate "VIA Technologies VT6655 support"
- depends on PCI && MAC80211 && m
+ depends on LEGACY_PCI && MAC80211 && m
help
This is a vendor-written driver for VIA VT6655.
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index cc30ff93e2e4..460326a529d6 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -203,7 +203,7 @@ config MOXA_INTELLIO
config MOXA_SMARTIO
tristate "Moxa SmartIO support v. 2.0"
- depends on SERIAL_NONSTANDARD && PCI
+ depends on SERIAL_NONSTANDARD && LEGACY_PCI
help
Say Y here if you have a Moxa SmartIO multiport serial card and/or
want to help develop a new version of this driver.
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index fc543ac97c13..607791b7f693 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -908,7 +908,7 @@ config SERIAL_VR41XX_CONSOLE
config SERIAL_JSM
tristate "Digi International NEO and Classic PCI Support"
- depends on PCI
+ depends on LEGACY_PCI
select SERIAL_CORE
help
This is a driver for Digi International's Neo and Classic series
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 6ed5e608dd04..a3446d44c118 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -343,7 +343,7 @@ config FB_IMX
config FB_CYBER2000
tristate "CyberPro 2000/2010/5000 support"
- depends on FB && PCI && (BROKEN || !SPARC64)
+ depends on FB && LEGACY_PCI && (BROKEN || !SPARC64)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -1264,7 +1264,7 @@ config FB_ATY128_BACKLIGHT
Say Y here if you want to control the backlight of your display.
config FB_ATY
- tristate "ATI Mach64 display support" if PCI || ATARI
+ tristate "ATI Mach64 display support" if LEGACY_PCI || ATARI
depends on FB && !SPARC32
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
@@ -1315,7 +1315,7 @@ config FB_ATY_BACKLIGHT
config FB_S3
tristate "S3 Trio/Virge support"
- depends on FB && PCI
+ depends on FB && LEGACY_PCI
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -1374,7 +1374,7 @@ config FB_SAVAGE_ACCEL
config FB_SIS
tristate "SiS/XGI display support"
- depends on FB && PCI
+ depends on FB && LEGACY_PCI
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -1404,7 +1404,7 @@ config FB_SIS_315
config FB_VIA
tristate "VIA UniChrome (Pro) and Chrome9 display support"
- depends on FB && PCI && GPIOLIB && I2C && (X86 || COMPILE_TEST)
+ depends on FB && LEGACY_PCI && GPIOLIB && I2C && (X86 || COMPILE_TEST)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -1442,7 +1442,7 @@ endif
config FB_NEOMAGIC
tristate "NeoMagic display support"
- depends on FB && PCI
+ depends on FB && LEGACY_PCI
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
@@ -1470,7 +1470,7 @@ config FB_KYRO
config FB_3DFX
tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support"
- depends on FB && PCI
+ depends on FB && LEGACY_PCI
select FB_CFB_IMAGEBLIT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
@@ -1518,7 +1518,7 @@ config FB_VOODOO1
config FB_VT8623
tristate "VIA VT8623 support"
- depends on FB && PCI
+ depends on FB && LEGACY_PCI
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -1532,7 +1532,7 @@ config FB_VT8623
config FB_TRIDENT
tristate "Trident/CyberXXX/CyberBlade support"
- depends on FB && PCI
+ depends on FB && LEGACY_PCI
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -1554,7 +1554,7 @@ config FB_TRIDENT
config FB_ARK
tristate "ARK 2000PV support"
- depends on FB && PCI
+ depends on FB && LEGACY_PCI
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -2226,7 +2226,7 @@ config FB_SSD1307
config FB_SM712
tristate "Silicon Motion SM712 framebuffer support"
- depends on FB && PCI
+ depends on FB && LEGACY_PCI
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 9d222ba17ec6..05258109bcc2 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -2053,7 +2053,7 @@ comment "PCI-based Watchdog Cards"
config PCIPCWATCHDOG
tristate "Berkshire Products PCI-PC Watchdog"
- depends on PCI
+ depends on LEGACY_PCI
help
This is the driver for the Berkshire Products PCI-PC Watchdog card.
This card simply watches your kernel to make sure it doesn't freeze,
@@ -2068,7 +2068,7 @@ config PCIPCWATCHDOG
config WDTPCI
tristate "PCI-WDT500/501 Watchdog timer"
- depends on PCI
+ depends on LEGACY_PCI
help
If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N.
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index 41ce12597177..07d9587eede4 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -23,10 +23,10 @@ config SND_AD1889
config SND_ALS300
tristate "Avance Logic ALS300/ALS300+"
+ depends on LEGACY_PCI && ZONE_DMA
select SND_PCM
select SND_AC97_CODEC
select SND_OPL3_LIB
- depends on ZONE_DMA
help
Say 'Y' or 'M' to include support for Avance Logic ALS300/ALS300+
@@ -35,6 +35,7 @@ config SND_ALS300
config SND_ALS4000
tristate "Avance Logic ALS4000"
+ depends on LEGACY_PCI
depends on ISA_DMA_API
select SND_OPL3_LIB
select SND_MPU401_UART
@@ -49,6 +50,7 @@ config SND_ALS4000
config SND_ALI5451
tristate "ALi M5451 PCI Audio Controller"
+ depends on LEGACY_PCI
select SND_MPU401_UART
select SND_AC97_CODEC
depends on ZONE_DMA
@@ -96,6 +98,7 @@ config SND_ATIIXP_MODEM
config SND_AU8810
tristate "Aureal Advantage"
+ depends on LEGACY_PCI
select SND_MPU401_UART
select SND_AC97_CODEC
help
@@ -110,6 +113,7 @@ config SND_AU8810
config SND_AU8820
tristate "Aureal Vortex"
+ depends on LEGACY_PCI
select SND_MPU401_UART
select SND_AC97_CODEC
help
@@ -123,6 +127,7 @@ config SND_AU8820
config SND_AU8830
tristate "Aureal Vortex 2"
+ depends on LEGACY_PCI
select SND_MPU401_UART
select SND_AC97_CODEC
help
@@ -151,13 +156,13 @@ config SND_AW2
config SND_AZT3328
tristate "Aztech AZF3328 / PCI168"
+ depends on LEGACY_PCI && ZONE_DMA
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_PCM
select SND_RAWMIDI
select SND_AC97_CODEC
select SND_TIMER
- depends on ZONE_DMA
help
Say Y here to include support for Aztech AZF3328 (PCI168)
soundcards.
@@ -172,6 +177,7 @@ config SND_AZT3328
config SND_BT87X
tristate "Bt87x Audio Capture"
+ depends on LEGACY_PCI
select SND_PCM
help
If you want to record audio from TV cards based on
@@ -193,6 +199,7 @@ config SND_BT87X_OVERCLOCK
config SND_CA0106
tristate "SB Audigy LS / Live 24bit"
+ depends on LEGACY_PCI
select SND_AC97_CODEC
select SND_RAWMIDI
select SND_VMASTER
@@ -205,6 +212,7 @@ config SND_CA0106
config SND_CMIPCI
tristate "C-Media 8338, 8738, 8768, 8770"
+ depends on LEGACY_PCI
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_PCM
@@ -221,6 +229,7 @@ config SND_OXYGEN_LIB
config SND_OXYGEN
tristate "C-Media 8786, 8787, 8788 (Oxygen)"
+ depends on LEGACY_PCI
select SND_OXYGEN_LIB
select SND_PCM
select SND_MPU401_UART
@@ -246,6 +255,7 @@ config SND_OXYGEN
config SND_CS4281
tristate "Cirrus Logic (Sound Fusion) CS4281"
+ depends on LEGACY_PCI
select SND_OPL3_LIB
select SND_RAWMIDI
select SND_AC97_CODEC
@@ -257,6 +267,7 @@ config SND_CS4281
config SND_CS46XX
tristate "Cirrus Logic (Sound Fusion) CS4280/CS461x/CS462x/CS463x"
+ depends on LEGACY_PCI
select SND_RAWMIDI
select SND_AC97_CODEC
select FW_LOADER
@@ -290,6 +301,7 @@ config SND_CS5530
config SND_CS5535AUDIO
tristate "CS5535/CS5536 Audio"
depends on X86_32 || MIPS || COMPILE_TEST
+ depends on LEGACY_PCI
select SND_PCM
select SND_AC97_CODEC
help
@@ -307,6 +319,7 @@ config SND_CS5535AUDIO
config SND_CTXFI
tristate "Creative Sound Blaster X-Fi"
+ depends on LEGACY_PCI
select SND_PCM
help
If you want to use soundcards based on Creative Sound Blastr X-Fi
@@ -462,13 +475,13 @@ config SND_INDIGODJX
config SND_EMU10K1
tristate "Emu10k1 (SB Live!, Audigy, E-mu APS)"
+ depends on LEGACY_PCI && ZONE_DMA
select FW_LOADER
select SND_HWDEP
select SND_RAWMIDI
select SND_AC97_CODEC
select SND_TIMER
select SND_SEQ_DEVICE if SND_SEQUENCER != n
- depends on ZONE_DMA
help
Say Y to include support for Sound Blaster PCI 512, Live!,
Audigy and E-mu APS (partially supported) soundcards.
@@ -489,6 +502,7 @@ config SND_EMU10K1_SEQ
config SND_EMU10K1X
tristate "Emu10k1X (Dell OEM Version)"
+ depends on LEGACY_PCI
select SND_AC97_CODEC
select SND_RAWMIDI
depends on ZONE_DMA
@@ -501,6 +515,7 @@ config SND_EMU10K1X
config SND_ENS1370
tristate "(Creative) Ensoniq AudioPCI 1370"
+ depends on LEGACY_PCI
select SND_RAWMIDI
select SND_PCM
help
@@ -511,6 +526,7 @@ config SND_ENS1370
config SND_ENS1371
tristate "(Creative) Ensoniq AudioPCI 1371/1373"
+ depends on LEGACY_PCI
select SND_RAWMIDI
select SND_AC97_CODEC
help
@@ -522,10 +538,10 @@ config SND_ENS1371
config SND_ES1938
tristate "ESS ES1938/1946/1969 (Solo-1)"
+ depends on LEGACY_PCI && ZONE_DMA
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_AC97_CODEC
- depends on ZONE_DMA
help
Say Y here to include support for soundcards based on ESS Solo-1
(ES1938, ES1946, ES1969) chips.
@@ -535,9 +551,9 @@ config SND_ES1938
config SND_ES1968
tristate "ESS ES1968/1978 (Maestro-1/2/2E)"
+ depends on LEGACY_PCI && ZONE_DMA
select SND_MPU401_UART
select SND_AC97_CODEC
- depends on ZONE_DMA
help
Say Y here to include support for soundcards based on ESS Maestro
1/2/2E chips.
@@ -569,6 +585,7 @@ config SND_ES1968_RADIO
config SND_FM801
tristate "ForteMedia FM801"
+ depends on LEGACY_PCI
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_AC97_CODEC
@@ -621,10 +638,10 @@ config SND_HDSPM
config SND_ICE1712
tristate "ICEnsemble ICE1712 (Envy24)"
+ depends on LEGACY_PCI && ZONE_DMA
select SND_MPU401_UART
select SND_AC97_CODEC
select BITREVERSE
- depends on ZONE_DMA
help
Say Y here to include support for soundcards based on the
ICE1712 (Envy24) chip.
@@ -640,6 +657,7 @@ config SND_ICE1712
config SND_ICE1724
tristate "ICE/VT1724/1720 (Envy24HT/PT)"
+ depends on LEGACY_PCI && ZONE_DMA
select SND_RAWMIDI
select SND_AC97_CODEC
select SND_VMASTER
@@ -712,6 +730,7 @@ config SND_LX6464ES
config SND_MAESTRO3
tristate "ESS Allegro/Maestro3"
select SND_AC97_CODEC
+ depends on LEGACY_PCI
depends on ZONE_DMA
help
Say Y here to include support for soundcards based on ESS Maestro 3
@@ -753,6 +772,7 @@ config SND_NM256
config SND_PCXHR
tristate "Digigram PCXHR"
+ depends on LEGACY_PCI
select FW_LOADER
select SND_PCM
select SND_HWDEP
@@ -764,6 +784,7 @@ config SND_PCXHR
config SND_RIPTIDE
tristate "Conexant Riptide"
+ depends on LEGACY_PCI
select FW_LOADER
select SND_OPL3_LIB
select SND_MPU401_UART
@@ -808,6 +829,7 @@ config SND_RME9652
config SND_SE6X
tristate "Studio Evolution SE6X"
depends on SND_OXYGEN=n && SND_VIRTUOSO=n # PCI ID conflict
+ depends on LEGACY_PCI
select SND_OXYGEN_LIB
select SND_PCM
select SND_MPU401_UART
@@ -827,10 +849,10 @@ config SND_SIS7019
config SND_SONICVIBES
tristate "S3 SonicVibes"
+ depends on LEGACY_PCI && ZONE_DMA
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_AC97_CODEC
- depends on ZONE_DMA
help
Say Y here to include support for soundcards based on the S3
SonicVibes chip.
@@ -840,9 +862,9 @@ config SND_SONICVIBES
config SND_TRIDENT
tristate "Trident 4D-Wave DX/NX; SiS 7018"
+ depends on LEGACY_PCI && ZONE_DMA
select SND_MPU401_UART
select SND_AC97_CODEC
- depends on ZONE_DMA
help
Say Y here to include support for soundcards based on Trident
4D-Wave DX/NX or SiS 7018 chips.
@@ -852,6 +874,7 @@ config SND_TRIDENT
config SND_VIA82XX
tristate "VIA 82C686A/B, 8233/8235 AC97 Controller"
+ depends on LEGACY_PCI
select SND_MPU401_UART
select SND_AC97_CODEC
help
@@ -863,6 +886,7 @@ config SND_VIA82XX
config SND_VIA82XX_MODEM
tristate "VIA 82C686A/B, 8233 based Modems"
+ depends on LEGACY_PCI
select SND_AC97_CODEC
help
Say Y here to include support for the integrated MC97 modem on
@@ -873,6 +897,7 @@ config SND_VIA82XX_MODEM
config SND_VIRTUOSO
tristate "Asus Virtuoso 66/100/200 (Xonar)"
+ depends on LEGACY_PCI
select SND_OXYGEN_LIB
select SND_PCM
select SND_MPU401_UART
@@ -889,6 +914,7 @@ config SND_VIRTUOSO
config SND_VX222
tristate "Digigram VX222"
+ depends on LEGACY_PCI
select SND_VX_LIB
help
Say Y here to include support for Digigram VX222 soundcards.
@@ -898,6 +924,7 @@ config SND_VX222
config SND_YMFPCI
tristate "Yamaha YMF724/740/744/754"
+ depends on LEGACY_PCI
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_AC97_CODEC
--
2.32.0
More information about the linux-riscv
mailing list