[PATCH 03/17] fix open-coded for_each_set_bit()

Yury Norov yury.norov at gmail.com
Sat Dec 18 13:19:59 PST 2021


Mellanox driver has an open-coded for_each_set_bit(). Fix it.

Signed-off-by: Yury Norov <yury.norov at gmail.com>
---
 drivers/net/ethernet/mellanox/mlx4/cmd.c | 23 ++++++-----------------
 1 file changed, 6 insertions(+), 17 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c
index e10b7b04b894..c56d2194cbfc 100644
--- a/drivers/net/ethernet/mellanox/mlx4/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c
@@ -1994,21 +1994,16 @@ static void mlx4_allocate_port_vpps(struct mlx4_dev *dev, int port)
 
 static int mlx4_master_activate_admin_state(struct mlx4_priv *priv, int slave)
 {
-	int port, err;
+	int p, port, err;
 	struct mlx4_vport_state *vp_admin;
 	struct mlx4_vport_oper_state *vp_oper;
 	struct mlx4_slave_state *slave_state =
 		&priv->mfunc.master.slave_state[slave];
 	struct mlx4_active_ports actv_ports = mlx4_get_active_ports(
 			&priv->dev, slave);
-	int min_port = find_first_bit(actv_ports.ports,
-				      priv->dev.caps.num_ports) + 1;
-	int max_port = min_port - 1 +
-		bitmap_weight(actv_ports.ports, priv->dev.caps.num_ports);
 
-	for (port = min_port; port <= max_port; port++) {
-		if (!test_bit(port - 1, actv_ports.ports))
-			continue;
+	for_each_set_bit(p, actv_ports.ports, priv->dev.caps.num_ports) {
+		port = p + 1;
 		priv->mfunc.master.vf_oper[slave].smi_enabled[port] =
 			priv->mfunc.master.vf_admin[slave].enable_smi[port];
 		vp_oper = &priv->mfunc.master.vf_oper[slave].vport[port];
@@ -2063,19 +2058,13 @@ static int mlx4_master_activate_admin_state(struct mlx4_priv *priv, int slave)
 
 static void mlx4_master_deactivate_admin_state(struct mlx4_priv *priv, int slave)
 {
-	int port;
+	int p, port;
 	struct mlx4_vport_oper_state *vp_oper;
 	struct mlx4_active_ports actv_ports = mlx4_get_active_ports(
 			&priv->dev, slave);
-	int min_port = find_first_bit(actv_ports.ports,
-				      priv->dev.caps.num_ports) + 1;
-	int max_port = min_port - 1 +
-		bitmap_weight(actv_ports.ports, priv->dev.caps.num_ports);
 
-
-	for (port = min_port; port <= max_port; port++) {
-		if (!test_bit(port - 1, actv_ports.ports))
-			continue;
+	for_each_set_bit(p, actv_ports.ports, priv->dev.caps.num_ports) {
+		port = p + 1;
 		priv->mfunc.master.vf_oper[slave].smi_enabled[port] =
 			MLX4_VF_SMI_DISABLED;
 		vp_oper = &priv->mfunc.master.vf_oper[slave].vport[port];
-- 
2.30.2




More information about the linux-riscv mailing list