[PATCH v3 06/11] riscv: dts: microchip: mpfs: Fix clock controller node

Geert Uytterhoeven geert at linux-m68k.org
Fri Dec 17 04:49:27 PST 2021


Fix the device node for the clock controller:
  - Remove bogus "reg-names" property,
  - Remove unneeded "clock-output-names" property.

Signed-off-by: Geert Uytterhoeven <geert at linux-m68k.org>
Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
Tested-by: Conor Dooley <conor.dooley at microchip.com>
---
v3:
  - Add Reviewed-by, Tested-by,

v2:
  - New.
---
 arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
index b372bc6459bf163a..d9c1dee3fb25beb8 100644
--- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
@@ -197,17 +197,8 @@ dma at 3000000 {
 		clkcfg: clkcfg at 20002000 {
 			compatible = "microchip,mpfs-clkcfg";
 			reg = <0x0 0x20002000 0x0 0x1000>;
-			reg-names = "mss_sysreg";
 			clocks = <&refclk>;
 			#clock-cells = <1>;
-			clock-output-names = "cpu", "axi", "ahb", "envm",	/* 0-3   */
-				 "mac0", "mac1", "mmc", "timer",		/* 4-7   */
-				"mmuart0", "mmuart1", "mmuart2", "mmuart3",	/* 8-11  */
-				"mmuart4", "spi0", "spi1", "i2c0",		/* 12-15 */
-				"i2c1", "can0", "can1", "usb",			/* 16-19 */
-				"rsvd", "rtc", "qspi", "gpio0",			/* 20-23 */
-				"gpio1", "gpio2", "ddrc", "fic0",		/* 24-27 */
-				"fic1", "fic2", "fic3", "athena", "cfm";	/* 28-32 */
 		};
 
 		serial0: serial at 20000000 {
-- 
2.25.1




More information about the linux-riscv mailing list