[PATCH v2 15/17] riscv: dts: microchip: refactor icicle kit device tree
conor.dooley at microchip.com
conor.dooley at microchip.com
Fri Dec 17 01:33:23 PST 2021
From: Conor Dooley <conor.dooley at microchip.com>
Assorted minor changes to the MPFS/Icicle kit device tree:
- rename serial to mmuart to match microchip documentation
- enable mmuart4 instead of mmuart0
- move stdout path to serial1 to avoid collision with
bootloader running on the e51
- split memory node to match updated fpga design
- move phy0 inside mac1 node to match phy configuration
- add labels where missing (cpus, cache controller)
- add missing address cells & interrupts to MACs
Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
---
.../microchip/microchip-mpfs-icicle-kit.dts | 52 ++++++++------
.../boot/dts/microchip/microchip-mpfs.dtsi | 70 ++++++++++---------
2 files changed, 68 insertions(+), 54 deletions(-)
diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
index 174f977c164b..f6542ef76046 100644
--- a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
+++ b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
@@ -1,5 +1,5 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/* Copyright (c) 2020 Microchip Technology Inc */
+/* Copyright (c) 2020-2021 Microchip Technology Inc */
/dts-v1/;
@@ -13,25 +13,34 @@ / {
compatible = "microchip,mpfs-icicle-kit", "microchip,mpfs";
aliases {
- ethernet0 = &emac1;
- serial0 = &serial0;
- serial1 = &serial1;
- serial2 = &serial2;
- serial3 = &serial3;
+ ethernet0 = &mac1;
+ serial0 = &mmuart0;
+ serial1 = &mmuart1;
+ serial2 = &mmuart2;
+ serial3 = &mmuart3;
+ serial4 = &mmuart4;
};
chosen {
- stdout-path = "serial0:115200n8";
+ stdout-path = "serial1:115200n8";
};
cpus {
timebase-frequency = <RTCCLK_FREQ>;
};
- memory at 80000000 {
+ ddrc_cache_lo: memory at 80000000 {
device_type = "memory";
- reg = <0x0 0x80000000 0x0 0x40000000>;
+ reg = <0x0 0x80000000 0x0 0x2e000000>;
clocks = <&clkcfg CLK_DDRC>;
+ status = "okay";
+ };
+
+ ddrc_cache_hi: memory at 1000000000 {
+ device_type = "memory";
+ reg = <0x10 0x0 0x0 0x40000000>;
+ clocks = <&clkcfg CLK_DDRC>;
+ status = "okay";
};
};
@@ -39,19 +48,19 @@ &refclk {
clock-frequency = <600000000>;
};
-&serial0 {
+&mmuart1 {
status = "okay";
};
-&serial1 {
+&mmuart2 {
status = "okay";
};
-&serial2 {
+&mmuart3 {
status = "okay";
};
-&serial3 {
+&mmuart4 {
status = "okay";
};
@@ -61,29 +70,32 @@ &mmc {
bus-width = <4>;
disable-wp;
cap-sd-highspeed;
+ cap-mmc-highspeed;
card-detect-delay = <200>;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
sd-uhs-sdr104;
};
-&emac0 {
+&mac0 {
phy-mode = "sgmii";
phy-handle = <&phy0>;
- phy0: ethernet-phy at 8 {
- reg = <8>;
- ti,fifo-depth = <0x01>;
- };
};
-&emac1 {
+&mac1 {
status = "okay";
phy-mode = "sgmii";
phy-handle = <&phy1>;
phy1: ethernet-phy at 9 {
reg = <9>;
- ti,fifo-depth = <0x01>;
+ ti,fifo-depth = <0x1>;
+ };
+ phy0: ethernet-phy at 8 {
+ reg = <8>;
+ ti,fifo-depth = <0x1>;
};
};
diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
index 808500be26c3..d311c5ea27c9 100644
--- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
@@ -1,5 +1,5 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/* Copyright (c) 2020 Microchip Technology Inc */
+/* Copyright (c) 2020-2021 Microchip Technology Inc */
/dts-v1/;
#include "dt-bindings/clock/microchip,mpfs-clock.h"
@@ -16,7 +16,7 @@ cpus {
#address-cells = <1>;
#size-cells = <0>;
- cpu at 0 {
+ cpu0: cpu at 0 {
compatible = "sifive,e51", "sifive,rocket0", "riscv";
device_type = "cpu";
i-cache-block-size = <64>;
@@ -34,7 +34,7 @@ cpu0_intc: interrupt-controller {
};
};
- cpu at 1 {
+ cpu1: cpu at 1 {
compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
d-cache-block-size = <64>;
d-cache-sets = <64>;
@@ -61,7 +61,7 @@ cpu1_intc: interrupt-controller {
};
};
- cpu at 2 {
+ cpu2: cpu at 2 {
compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
d-cache-block-size = <64>;
d-cache-sets = <64>;
@@ -88,7 +88,7 @@ cpu2_intc: interrupt-controller {
};
};
- cpu at 3 {
+ cpu3: cpu at 3 {
compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
d-cache-block-size = <64>;
d-cache-sets = <64>;
@@ -115,7 +115,7 @@ cpu3_intc: interrupt-controller {
};
};
- cpu at 4 {
+ cpu4: cpu at 4 {
compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
d-cache-block-size = <64>;
d-cache-sets = <64>;
@@ -153,8 +153,9 @@ soc {
compatible = "simple-bus";
ranges;
- cache-controller at 2010000 {
+ cctrllr: cache-controller at 2010000 {
compatible = "sifive,fu540-c000-ccache", "cache";
+ reg = <0x0 0x2010000 0x0 0x1000>;
cache-block-size = <64>;
cache-level = <2>;
cache-sets = <1024>;
@@ -162,10 +163,9 @@ cache-controller at 2010000 {
cache-unified;
interrupt-parent = <&plic>;
interrupts = <1>, <2>, <3>;
- reg = <0x0 0x2010000 0x0 0x1000>;
};
- clint at 2000000 {
+ clint: clint at 2000000 {
compatible = "sifive,fu540-c000-clint", "sifive,clint0";
reg = <0x0 0x2000000 0x0 0xC000>;
interrupts-extended = <&cpu0_intc HART_INT_M_SOFT>,
@@ -198,15 +198,6 @@ plic: interrupt-controller at c000000 {
riscv,ndev = <186>;
};
- dma at 3000000 {
- compatible = "sifive,fu540-c000-pdma";
- reg = <0x0 0x3000000 0x0 0x8000>;
- interrupt-parent = <&plic>;
- interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>,
- <30>;
- #dma-cells = <1>;
- };
-
clkcfg: clkcfg at 20002000 {
compatible = "microchip,mpfs-clkcfg";
reg = <0x0 0x20002000 0x0 0x1000>;
@@ -214,7 +205,7 @@ clkcfg: clkcfg at 20002000 {
#clock-cells = <1>;
};
- serial0: serial at 20000000 {
+ mmuart0: serial at 20000000 {
compatible = "ns16550a";
reg = <0x0 0x20000000 0x0 0x400>;
reg-io-width = <4>;
@@ -223,10 +214,10 @@ serial0: serial at 20000000 {
interrupts = <90>;
current-speed = <115200>;
clocks = <&clkcfg CLK_MMUART0>;
- status = "disabled";
+ status = "disabled"; /* Reserved for the HSS */
};
- serial1: serial at 20100000 {
+ mmuart1: serial at 20100000 {
compatible = "ns16550a";
reg = <0x0 0x20100000 0x0 0x400>;
reg-io-width = <4>;
@@ -238,7 +229,7 @@ serial1: serial at 20100000 {
status = "disabled";
};
- serial2: serial at 20102000 {
+ mmuart2: serial at 20102000 {
compatible = "ns16550a";
reg = <0x0 0x20102000 0x0 0x400>;
reg-io-width = <4>;
@@ -250,7 +241,7 @@ serial2: serial at 20102000 {
status = "disabled";
};
- serial3: serial at 20104000 {
+ mmuart3: serial at 20104000 {
compatible = "ns16550a";
reg = <0x0 0x20104000 0x0 0x400>;
reg-io-width = <4>;
@@ -262,42 +253,53 @@ serial3: serial at 20104000 {
status = "disabled";
};
+ mmuart4: serial at 20106000 {
+ compatible = "ns16550a";
+ reg = <0x0 0x20106000 0x0 0x400>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ interrupt-parent = <&plic>;
+ interrupts = <94>;
+ clocks = <&clkcfg CLK_MMUART4>;
+ current-speed = <115200>;
+ status = "disabled";
+ };
+
/* Common node entry for emmc/sd */
mmc: mmc at 20008000 {
compatible = "microchip,mpfs-sd4hc", "cdns,sd4hc";
reg = <0x0 0x20008000 0x0 0x1000>;
interrupt-parent = <&plic>;
- interrupts = <88>, <89>;
+ interrupts = <88>;
clocks = <&clkcfg CLK_MMC>;
max-frequency = <200000000>;
status = "disabled";
};
- emac0: ethernet at 20110000 {
+ mac0: ethernet at 20110000 {
compatible = "cdns,macb";
reg = <0x0 0x20110000 0x0 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupt-parent = <&plic>;
- interrupts = <64>, <65>, <66>, <67>;
+ interrupts = <64>, <65>, <66>, <67>, <68>, <69>;
local-mac-address = [00 00 00 00 00 00];
clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AHB>;
clock-names = "pclk", "hclk";
status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
};
- emac1: ethernet at 20112000 {
+ mac1: ethernet at 20112000 {
compatible = "cdns,macb";
reg = <0x0 0x20112000 0x0 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupt-parent = <&plic>;
- interrupts = <70>, <71>, <72>, <73>;
+ interrupts = <70>, <71>, <72>, <73>, <74>, <75>;
local-mac-address = [00 00 00 00 00 00];
clocks = <&clkcfg CLK_MAC1>, <&clkcfg CLK_AHB>;
- status = "disabled";
clock-names = "pclk", "hclk";
- #address-cells = <1>;
- #size-cells = <0>;
+ status = "disabled";
};
-
};
};
--
2.33.1
More information about the linux-riscv
mailing list