[PATCH v2 06/11] riscv: dts: microchip: mpfs: Fix clock controller node

[Conor.Dooley at microchip.com]

On 16/12/2021 13:37, Geert Uytterhoeven wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> Fix the device node for the clock controller:
>    - Remove bogus "reg-names" property,
>    - Remove unneeded "clock-output-names" property.
> 
> Signed-off-by: Geert Uytterhoeven <geert at linux-m68k.org>
Ha, doing my job for me again - was hoping to send my v2 tomorrow too so 
good timing on your part.

Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
(I have booted the 5 patches for the polarfire on my board, so 
Tested-by: Conor Dooley <conor.dooley at microchip.com> too?)
> ---
> v2:
>    - New.
> ---
>   arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi | 9 ---------
>   1 file changed, 9 deletions(-)
> 
> diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> index b372bc6459bf163a..d9c1dee3fb25beb8 100644
> --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> @@ -197,17 +197,8 @@ dma at 3000000 {
>                  clkcfg: clkcfg at 20002000 {
>                          compatible = "microchip,mpfs-clkcfg";
>                          reg = <0x0 0x20002000 0x0 0x1000>;
> -                       reg-names = "mss_sysreg";
>                          clocks = <&refclk>;
>                          #clock-cells = <1>;
> -                       clock-output-names = "cpu", "axi", "ahb", "envm",       /* 0-3   */
> -                                "mac0", "mac1", "mmc", "timer",                /* 4-7   */
> -                               "mmuart0", "mmuart1", "mmuart2", "mmuart3",     /* 8-11  */
> -                               "mmuart4", "spi0", "spi1", "i2c0",              /* 12-15 */
> -                               "i2c1", "can0", "can1", "usb",                  /* 16-19 */
> -                               "rsvd", "rtc", "qspi", "gpio0",                 /* 20-23 */
> -                               "gpio1", "gpio2", "ddrc", "fic0",               /* 24-27 */
> -                               "fic1", "fic2", "fic3", "athena", "cfm";        /* 28-32 */
>                  };
> 
>                  serial0: serial at 20000000 {
> --
> 2.25.1
>