[PATCH v2 09/11] riscv: dts: sifive: Group tuples in register properties

[Geert Uytterhoeven]

To improve human readability and enable automatic validation, the tuples
in "reg" properties containing register blocks should be grouped using
angle brackets.

Signed-off-by: Geert Uytterhoeven <geert at linux-m68k.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at canonical.com>
---
v2:
  - Add Reviewed-by.
---
 arch/riscv/boot/dts/sifive/fu540-c000.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
index 0caca0ccf6711ded..e2efcf08210926f8 100644
--- a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
+++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
@@ -196,8 +196,8 @@ i2c0: i2c at 10030000 {
 		};
 		qspi0: spi at 10040000 {
 			compatible = "sifive,fu540-c000-spi", "sifive,spi0";
-			reg = <0x0 0x10040000 0x0 0x1000
-			       0x0 0x20000000 0x0 0x10000000>;
+			reg = <0x0 0x10040000 0x0 0x1000>,
+			      <0x0 0x20000000 0x0 0x10000000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <51>;
 			clocks = <&prci PRCI_CLK_TLCLK>;
@@ -207,8 +207,8 @@ qspi0: spi at 10040000 {
 		};
 		qspi1: spi at 10041000 {
 			compatible = "sifive,fu540-c000-spi", "sifive,spi0";
-			reg = <0x0 0x10041000 0x0 0x1000
-			       0x0 0x30000000 0x0 0x10000000>;
+			reg = <0x0 0x10041000 0x0 0x1000>,
+			      <0x0 0x30000000 0x0 0x10000000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <52>;
 			clocks = <&prci PRCI_CLK_TLCLK>;
@@ -230,8 +230,8 @@ eth0: ethernet at 10090000 {
 			compatible = "sifive,fu540-c000-gem";
 			interrupt-parent = <&plic0>;
 			interrupts = <53>;
-			reg = <0x0 0x10090000 0x0 0x2000
-			       0x0 0x100a0000 0x0 0x1000>;
+			reg = <0x0 0x10090000 0x0 0x2000>,
+			      <0x0 0x100a0000 0x0 0x1000>;
 			local-mac-address = [00 00 00 00 00 00];
 			clock-names = "pclk", "hclk";
 			clocks = <&prci PRCI_CLK_GEMGXLPLL>,
-- 
2.25.1