[PATCH] percpu: km: ensure it is used with NOMMU (either UP or SMP)

[Geert Uytterhoeven]

Hi Dennis,

On Tue, Dec 14, 2021 at 6:26 PM Dennis Zhou <dennis at kernel.org> wrote:
> On Tue, Dec 14, 2021 at 05:29:22PM +0100, Geert Uytterhoeven wrote:
> > On Wed, Dec 1, 2021 at 12:53 PM Vladimir Murzin <vladimir.murzin at arm.com> wrote:
> > > On 11/30/21 5:41 PM, Dennis Zhou wrote:
> > > > On Tue, Nov 30, 2021 at 05:29:54PM +0000, Vladimir Murzin wrote:
> > > >> Currently, NOMMU pull km allocator via !SMP dependency because most of
> > > >> them are UP, yet for SMP+NOMMU vm allocator gets pulled which:
> > > >>
> > > >> * may lead to broken build [1]
> > > >> * ...or not working runtime due to [2]
> > > >>
> > > >> It looks like SMP+NOMMU case was overlooked in bbddff054587 ("percpu:
> > > >> use percpu allocator on UP too") so restore that.
> > > >>
> > > >> [1]
> > > >> For ARM SMP+NOMMU (R-class cores)
> > > >>
> > > >> arm-none-linux-gnueabihf-ld: mm/percpu.o: in function `pcpu_post_unmap_tlb_flush':
> > > >> mm/percpu-vm.c:188: undefined reference to `flush_tlb_kernel_range'
> > > >>
> > > >> [2]
> > > >> static inline
> > > >> int vmap_pages_range_noflush(unsigned long addr, unsigned long end,
> > > >>                 pgprot_t prot, struct page **pages, unsigned int page_shift)
> > > >> {
> > > >>        return -EINVAL;
> > > >> }
> > > >>
> > > >> Signed-off-by: Vladimir Murzin <vladimir.murzin at arm.com>
> > > >> ---
> > > >>  mm/Kconfig | 3 +--
> > > >>  1 file changed, 1 insertion(+), 2 deletions(-)
> > > >>
> > > >> diff --git a/mm/Kconfig b/mm/Kconfig
> > > >> index d16ba92..66331e0 100644
> > > >> --- a/mm/Kconfig
> > > >> +++ b/mm/Kconfig
> > > >> @@ -425,9 +425,8 @@ config THP_SWAP
> > > >>  # UP and nommu archs use km based percpu allocator
> > > >>  #
> > > >>  config NEED_PER_CPU_KM
> > > >> -    depends on !SMP
> > > >>      bool
> > > >> -    default y
> > > >> +    default !SMP || !MMU
> > > >>
> > > >
> > > > Should this be `depends on !SMP || !MMU` with default yes? Because with
> > > > SMP && MMU, it shouldn't be an option to run with percpu-km.
> > >
> > > IIUC these are equivalent, truth table would not change if is under "depends"
> > > or "default"
> > >
> > > SMP    MMU   NEED_PER_CPU_KM
> > >  y      y    !y || !y => n || n => n
> > >  y      n    !y || !n => n || y => y
> > >  n      y    !n || !y => y || n => y
> > >  n      n    !n || !n => y || y => y
> > >
> > > >
> > > >>  config CLEANCACHE
> > > >>      bool "Enable cleancache driver to cache clean pages if tmem is present"
> > > >> --
> > > >> 2.7.4
> > > >>
> > > >
> > > > It's interesting to me that this is all coming up at once. Earlier this
> > > > month I had the same conversation with people involved with sh [1].
> > > >
> > > > [1] https://lore.kernel.org/linux-sh/YY7tp5attRyK42Zk@fedora/
> > > >
> > > > I can pull this shortly once I see whatever happened to linux-sh.
> > >
> > > Ahh, good to know! Adding SH folks here (start of discussion [0]). I see you came
> > > to the same conclusion, right?
> > >
> > > IIRC, RISC-V also have SMP+NOMMU, so adding them as well.
> >
> > I had seen the j-Core thread, but completely forgot about
> > Canaan K210 (RV64 SMP+NOMMU).
> >
> > This became commit 3583521aabac76e5 ("percpu: km: ensure it is used
> > with NOMMU (either UP or SMP)").  And now booting K210 prints:
> >
> >     percpu: wasting 10 pages per chunk
> >
> > a) Is this bad?
>
> It's not great.. Can you share the line on boot with the following
> prefix: pcpu-alloc [1].

There are no such lines.
"make mm/percpu.i mm/percpu.s" and inspecting the generated files,
and vmlinux, proves the code is there. But apparently it's not called.

So there may be no issue on my system?

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds