[v4 00/11] Improve RISC-V Perf support using SBI PMU and sscofpmf extension
Atish Patra
atishp at atishpatra.org
Tue Dec 14 10:29:34 PST 2021
On Tue, Dec 14, 2021 at 1:14 AM Nikita Shubin <nikita.shubin at maquefel.me> wrote:
>
> Hello Atish!
>
> I get linker error if CONFIG_RISCV_PMU_LEGACY is not set:
>
> riscv64-unknown-linux-gnu-ld: drivers/perf/riscv_pmu_sbi.o: in function
> `pmu_sbi_device_probe': linux/drivers/perf/riscv_pmu_sbi.c:688:
> undefined reference to `riscv_pmu_legacy_init'
>
> It looks like you need some guards or a dummy function for
> riscv_pmu_legacy_init.
Ahh yes. Thanks for catching that. I will fix it in the next version.
>
> On Mon, 25 Oct 2021 12:53:39 -0700
> Atish Patra <atish.patra at wdc.com> wrote:
>
> > This series adds improved perf support for RISC-V based system using
> > SBI PMU extension[1] and Sscofpmf extension[2]. The SBI PMU extension
> > allows the kernel to program the counters for different events and
> > start/stop counters while the sscofpmf extension allows the counter
> > overflow interrupt and privilege mode filtering. An hardware platform
> > can leverage SBI PMU extension without the sscofpmf extension if it
> > supports mcountinhibit and mcounteren. However, the reverse is not
> > true. With both of these extension enabled, a platform can take
> > advantage of all both event counting and sampling using perf tool.
> >
> > This series introduces a platform perf driver instead of a existing
> > arch specific implementation. The new perf implementation has adopted
> > a modular approach where most of the generic event handling is done
> > in the core library while individual PMUs need to only implement
> > necessary features specific to the PMU. This is easily extensible and
> > any future RISC-V PMU implementation can leverage this. Currently,
> > SBI PMU driver & legacy PMU driver are implemented as a part of this
> > series.
> >
> > The legacy driver tries to reimplement the existing minimal perf
> > under a new config to maintain backward compatibility. This
> > implementation only allows monitoring of always running
> > cycle/instruction counters. Moreover, they can not be started or
> > stopped. In general, this is very limited and not very useful. That's
> > why, I am not very keen to carry the support into the new driver.
> > However, I don't want to break perf for any existing hardware
> > platforms. If everybody agrees that we don't need legacy perf
> > implementation for older implementation, I will be happy to drop
> > PATCH 4.
> >
> > This series has been tested in Qemu (RV64 & RV32) and HiFive
> > Unmatched. Qemu[5] & OpenSBI [3] patches are required to test it on
> > Qemu and a dt patch required in U-Boot[6] for HiFive Unmatched. Qemu
> > changes are not backward compatible. That means, you can not use perf
> > anymore on older Qemu versions with latest OpenSBI and/or Kernel.
> > However, newer kernel will just use legacy pmu driver if old OpenSBI
> > is detected.
> >
> > The U-Boot patch is just an example that encodes few of the events
> > defined in fu740 documentation [7] in the DT. We can update the DT to
> > include all the events defined if required.
> >
> > Here is an output of perf stat/report while running perf benchmark
> > with OpenSBI, Linux kernel and U-Boot patches applied.
> >
> > HiFive Unmatched:
> > =================
> > perf stat -e cycles -e instructions -e L1-icache-load-misses -e
> > branches -e branch-misses \ -e r0000000000000200 -e r0000000000000400
> > \ -e r0000000000000800 perf bench sched messaging -g 25 -l 15
> >
> > # Running 'sched/messaging' benchmark:
> > # 20 sender and receiver processes per group
> > # 25 groups == 1000 processes run
> >
> > Total time: 0.826 [sec]
> >
> > Performance counter stats for 'perf bench sched messaging -g 25 -l
> > 15':
> >
> > 3426710073 cycles (65.92%)
> > 1348772808 instructions #0.39 insn per cycle
> > (75.44%) 0 L1-icache-load-misses (72.28%)
> > 201133996 branches (67.88%)
> > 44663584 branch-misses #22.21% of all branches
> > (35.01%) 248194747 r0000000000000200 (41.94%) --> Integer
> > load instruction retired 156879950 r0000000000000400
> > (43.58%) --> Integer store instruction retired 6988678
> > r0000000000000800 (47.91%) --> Atomic memory operation retired
> >
> > 1.931335000 seconds time elapsed
> >
> > 1.100415000 seconds user
> > 3.755176000 seconds sys
> >
> >
> > QEMU:
> > =========
> > Perf stat:
> > =========
> >
> > [root at fedora-riscv riscv]# perf stat -e r8000000000000005 -e
> > r8000000000000007 \ -e r8000000000000006 -e r0000000000020002 -e
> > r0000000000020004 -e branch-misses \ -e cache-misses -e
> > dTLB-load-misses -e dTLB-store-misses -e iTLB-load-misses \ -e cycles
> > -e instructions perf bench sched messaging -g 15 -l 10 \ Running with
> > 15*40 (== 600) tasks. Time: 6.578
> >
> > Performance counter stats for './hackbench -pipe 15 process':
> >
> > 1,794 r8000000000000005 (52.59%) -->
> > SBI_PMU_FW_SET_TIMER 2,859 r8000000000000007 (60.74%) -->
> > SBI_PMU_FW_IPI_RECVD 4,205 r8000000000000006 (68.71%) -->
> > SBI_PMU_FW_IPI_SENT 0 r0000000000020002 (81.69%)
> > <not counted> r0000000000020004 (0.00%)
> > <not counted> branch-misses (0.00%)
> > <not counted> cache-misses (0.00%)
> > 7,878,328 dTLB-load-misses (15.60%)
> > 680,270 dTLB-store-misses (28.45%)
> > 8,287,931 iTLB-load-misses (39.24%)
> > 20,008,506,675 cycles (48.60%)
> > 21,484,427,932 instructions # 1.07 insn per cycle (56.60%)
> >
> > 1.681344735 seconds time elapsed
> >
> > 0.614460000 seconds user
> > 8.313254000 seconds sys
> >
> >
> > Perf record:
> > ============
> > [root at fedora-riscv riscv]# perf record -e cycles -e instructions \
> > -e dTLB-load-misses -e dTLB-store-misses -e iTLB-load-misses -c 10000
> > \ perf bench sched messaging -g 15 -l 10
> > # Running 'sched/messaging' benchmark:
> > # 20 sender and receiver processes per group
> > # 15 groups == 600 processes run
> >
> > Total time: 1.261 [sec]
> > [ perf record: Woken up 1 times to write data ]
> > [ perf record: Captured and wrote 0.101 MB perf.data (845 samples) ]
> >
> > [root at fedora-riscv riscv]# perf report
> > Available samples
> > 407 cycles
> > _ 407 instructions
> > _ 18 dTLB-load-misses
> > _ 2 dTLB-store-misses
> > _ 11 iTLB-load-misses
> > _
> > [1]
> > https://github.com/riscv-non-isa/riscv-sbi-doc/blob/master/riscv-sbi.adoc
> > [2]
> > https://drive.google.com/file/d/171j4jFjIkKdj5LWcExphq4xG_2sihbfd/edit
> > [3] https://github.com/atishp04/opensbi/tree/pmu_sscofpmf_v2 [4]
> > https://github.com/atishp04/linux/tree/riscv_pmu_v4 [5]
> > https://github.com/atishp04/qemu/tree/riscv_pmu_v3 [6]
> > https://github.com/atishp04/u-boot/tree/hifive_unmatched_dt_pmu [7]
> > https://sifive.cdn.prismic.io/sifive/de1491e5-077c-461d-9605-e8a0ce57337d_fu740-c000-manual-v1p3.pdf
> >
> > Changes from v3->v4:
> > 1. Do not proceed overflow handler if event doesn't set for sampling.
> > 2. overflow status register is only read after counters are stopped.
> > 3. Added the PMU DT node for HiFive Unmatched.
> >
> > Changes from v2->v3:
> > 1. Added interrupt overflow support.
> > 2. Cleaned up legacy driver initialization.
> > 3. Supports perf record now.
> > 4. Added the DT binding and maintainers file.
> > 5. Changed cpu hotplug notifier to be multi-state.
> > 6. OpenSBI doesn't disable cycle/instret counter during boot. Update
> > the perf code to disable all the counter during the boot.
> >
> > Changes from v1->v2
> > 1. Implemented the latest SBI PMU extension specification.
> > 2. The core platform driver was changed to operate as a library while
> > only sbi based PMU is built as a driver. The legacy one is just a
> > fallback if SBI PMU extension is not available.
> >
> > Atish Patra (11):
> > RISC-V: Remove the current perf implementation
> > RISC-V: Add CSR encodings for all HPMCOUNTERS
> > RISC-V: Add a perf core library for pmu drivers
> > RISC-V: Add a simple platform driver for RISC-V legacy perf
> > RISC-V: Add RISC-V SBI PMU extension definitions
> > dt-binding: pmu: Add RISC-V PMU DT bindings
> > RISC-V: Add perf platform driver based on SBI PMU extension
> > RISC-V: Add interrupt support for perf
> > Documentation: riscv: Remove the old documentation
> > riscv: dts: fu740: Add pmu node
> > MAINTAINERS: Add entry for RISC-V PMU drivers
> >
> > .../devicetree/bindings/perf/riscv,pmu.yaml | 51 ++
> > Documentation/riscv/pmu.rst | 255 ------
> > MAINTAINERS | 10 +
> > arch/riscv/Kconfig | 13 -
> > arch/riscv/boot/dts/sifive/fu740-c000.dtsi | 3 +
> > arch/riscv/include/asm/csr.h | 66 +-
> > arch/riscv/include/asm/perf_event.h | 72 --
> > arch/riscv/include/asm/sbi.h | 97 +++
> > arch/riscv/kernel/Makefile | 1 -
> > arch/riscv/kernel/perf_event.c | 485 ------------
> > drivers/perf/Kconfig | 25 +
> > drivers/perf/Makefile | 5 +
> > drivers/perf/riscv_pmu.c | 331 ++++++++
> > drivers/perf/riscv_pmu_legacy.c | 143 ++++
> > drivers/perf/riscv_pmu_sbi.c | 732 ++++++++++++++++++
> > include/linux/cpuhotplug.h | 1 +
> > include/linux/perf/riscv_pmu.h | 69 ++
> > 17 files changed, 1532 insertions(+), 827 deletions(-)
> > create mode 100644
> > Documentation/devicetree/bindings/perf/riscv,pmu.yaml delete mode
> > 100644 Documentation/riscv/pmu.rst delete mode 100644
> > arch/riscv/kernel/perf_event.c create mode 100644
> > drivers/perf/riscv_pmu.c create mode 100644
> > drivers/perf/riscv_pmu_legacy.c create mode 100644
> > drivers/perf/riscv_pmu_sbi.c create mode 100644
> > include/linux/perf/riscv_pmu.h
> >
> > --
> > 2.31.1
> >
> >
> > _______________________________________________
> > linux-riscv mailing list
> > linux-riscv at lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-riscv
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
--
Regards,
Atish
More information about the linux-riscv
mailing list