[PATCH v3 5/6] riscv: dts: sifive unmatched: Fix regulator for board rev3
David Abdurachmanov
david.abdurachmanov at gmail.com
Thu Dec 2 19:55:25 PST 2021
"
On Thu, Dec 2, 2021 at 11:45 PM Palmer Dabbelt <palmer at dabbelt.com> wrote:
>
> On Fri, 19 Nov 2021 14:55:41 PST (-0800), plr.vincent at gmail.com wrote:
> > The existing values are rejected by the da9063 regulator driver, as they
> > are unachievable with the declared chip setup (non-merged vcore and bmem
> > are unable to provide the declared curent).
> >
> > Fix voltages to match rev3 schematics, which also matches their boot-up
>
> There's a few references to rev 3 here. I'm not sure if that means we
> should have multiple device trees -- this one seems pretty benign, but
> some of the regulator stuff worries me there, where anything rev 3
> specific might not be safe on other revisions.
As I mentioned some time before there is no such thing as Unmatched "A00".
The production boards is:
PCB revision: 3
BOM revision: B
BOM variant: 0
Or "3B0".
There are a few "3A0" boards out in the wild, but the changes are
minimal and the same DT applies.
>
> Did any previous revisions make it out of the lab?
>
> > configuration within the chip's available precision.
> > Declare bcore1/bcore2 and bmem/bio as merged.
> > Set ldo09 and ldo10 as always-on as their consumers are not declared but
> > exist.
> > Drop ldo current limits as there is no current limit feature for these
> > regulators in the DA9063. Fixes warnings like:
> > DA9063_LDO3: Operation of current configuration missing
> >
> > Signed-off-by: Vincent Pelletier <plr.vincent at gmail.com>
> >
> > ---
> > Changes since v2:
> > - Fix end-of-commit-message separator so change lists do not end up in them.
> > Changes since v1:
> > - Remove trailing "." on subject line.
> > ---
> > .../boot/dts/sifive/hifive-unmatched-a00.dts | 84 ++++++-------------
> > 1 file changed, 24 insertions(+), 60 deletions(-)
> >
> > diff --git a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
> > index 6e7775fdae32..1abad0eec02e 100644
> > --- a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
> > +++ b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
> > @@ -93,47 +93,31 @@ wdt {
> > };
> >
> > regulators {
> > - vdd_bcore1: bcore1 {
> > - regulator-min-microvolt = <900000>;
> > - regulator-max-microvolt = <900000>;
> > - regulator-min-microamp = <5000000>;
> > - regulator-max-microamp = <5000000>;
> > - regulator-always-on;
> > - };
> > -
> > - vdd_bcore2: bcore2 {
> > - regulator-min-microvolt = <900000>;
> > - regulator-max-microvolt = <900000>;
> > - regulator-min-microamp = <5000000>;
> > - regulator-max-microamp = <5000000>;
> > + vdd_bcore: bcores-merged {
> > + regulator-min-microvolt = <1050000>;
> > + regulator-max-microvolt = <1050000>;
> > + regulator-min-microamp = <4800000>;
> > + regulator-max-microamp = <4800000>;
> > regulator-always-on;
> > };
> >
> > vdd_bpro: bpro {
> > regulator-min-microvolt = <1800000>;
> > regulator-max-microvolt = <1800000>;
> > - regulator-min-microamp = <2500000>;
> > - regulator-max-microamp = <2500000>;
> > + regulator-min-microamp = <2400000>;
> > + regulator-max-microamp = <2400000>;
> > regulator-always-on;
> > };
> >
> > vdd_bperi: bperi {
> > - regulator-min-microvolt = <1050000>;
> > - regulator-max-microvolt = <1050000>;
> > + regulator-min-microvolt = <1060000>;
> > + regulator-max-microvolt = <1060000>;
> > regulator-min-microamp = <1500000>;
> > regulator-max-microamp = <1500000>;
> > regulator-always-on;
> > };
> >
> > - vdd_bmem: bmem {
> > - regulator-min-microvolt = <1200000>;
> > - regulator-max-microvolt = <1200000>;
> > - regulator-min-microamp = <3000000>;
> > - regulator-max-microamp = <3000000>;
> > - regulator-always-on;
> > - };
> > -
> > - vdd_bio: bio {
> > + vdd_bmem_bio: bmem-bio-merged {
> > regulator-min-microvolt = <1200000>;
> > regulator-max-microvolt = <1200000>;
> > regulator-min-microamp = <3000000>;
> > @@ -144,86 +128,66 @@ vdd_bio: bio {
> > vdd_ldo1: ldo1 {
> > regulator-min-microvolt = <1800000>;
> > regulator-max-microvolt = <1800000>;
> > - regulator-min-microamp = <100000>;
> > - regulator-max-microamp = <100000>;
> > regulator-always-on;
> > };
> >
> > vdd_ldo2: ldo2 {
> > regulator-min-microvolt = <1800000>;
> > regulator-max-microvolt = <1800000>;
> > - regulator-min-microamp = <200000>;
> > - regulator-max-microamp = <200000>;
> > regulator-always-on;
> > };
> >
> > vdd_ldo3: ldo3 {
> > - regulator-min-microvolt = <1800000>;
> > - regulator-max-microvolt = <1800000>;
> > - regulator-min-microamp = <200000>;
> > - regulator-max-microamp = <200000>;
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > regulator-always-on;
> > };
> >
> > vdd_ldo4: ldo4 {
> > - regulator-min-microvolt = <1800000>;
> > - regulator-max-microvolt = <1800000>;
> > - regulator-min-microamp = <200000>;
> > - regulator-max-microamp = <200000>;
> > + regulator-min-microvolt = <2500000>;
> > + regulator-max-microvolt = <2500000>;
> > regulator-always-on;
> > };
> >
> > vdd_ldo5: ldo5 {
> > - regulator-min-microvolt = <1800000>;
> > - regulator-max-microvolt = <1800000>;
> > - regulator-min-microamp = <100000>;
> > - regulator-max-microamp = <100000>;
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > regulator-always-on;
> > };
> >
> > vdd_ldo6: ldo6 {
> > - regulator-min-microvolt = <3300000>;
> > - regulator-max-microvolt = <3300000>;
> > - regulator-min-microamp = <200000>;
> > - regulator-max-microamp = <200000>;
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > regulator-always-on;
> > };
> >
> > vdd_ldo7: ldo7 {
> > - regulator-min-microvolt = <1800000>;
> > - regulator-max-microvolt = <1800000>;
> > - regulator-min-microamp = <200000>;
> > - regulator-max-microamp = <200000>;
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > regulator-always-on;
> > };
> >
> > vdd_ldo8: ldo8 {
> > - regulator-min-microvolt = <1800000>;
> > - regulator-max-microvolt = <1800000>;
> > - regulator-min-microamp = <200000>;
> > - regulator-max-microamp = <200000>;
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > regulator-always-on;
> > };
> >
> > vdd_ld09: ldo9 {
> > regulator-min-microvolt = <1050000>;
> > regulator-max-microvolt = <1050000>;
> > - regulator-min-microamp = <200000>;
> > - regulator-max-microamp = <200000>;
> > + regulator-always-on;
> > };
> >
> > vdd_ldo10: ldo10 {
> > regulator-min-microvolt = <1000000>;
> > regulator-max-microvolt = <1000000>;
> > - regulator-min-microamp = <300000>;
> > - regulator-max-microamp = <300000>;
> > + regulator-always-on;
> > };
> >
> > vdd_ldo11: ldo11 {
> > regulator-min-microvolt = <2500000>;
> > regulator-max-microvolt = <2500000>;
> > - regulator-min-microamp = <300000>;
> > - regulator-max-microamp = <300000>;
> > regulator-always-on;
> > };
> > };
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
More information about the linux-riscv
mailing list