[PATCH net-next] stmmac: align RX buffers
Matteo Croce
mcroce at linux.microsoft.com
Thu Aug 12 03:18:35 PDT 2021
On Thu, 12 Aug 2021 10:48:03 +0200
Eric Dumazet <eric.dumazet at gmail.com> wrote:
>
>
> On 8/11/21 4:16 PM, Marc Zyngier wrote:
> > On Wed, 11 Aug 2021 13:53:59 +0100,
> > Eric Dumazet <eric.dumazet at gmail.com> wrote:
> >
> >> Are you sure you do not need to adjust stmmac_set_bfsize(),
> >> stmmac_rx_buf1_len() and stmmac_rx_buf2_len() ?
> >>
> >> Presumably DEFAULT_BUFSIZE also want to be increased by NET_SKB_PAD
> >>
> >> Patch for stmmac_rx_buf1_len() :
> >>
> >> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> >> b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index
> >> 7b8404a21544cf29668e8a14240c3971e6bce0c3..041a74e7efca3436bfe3e17f972dd156173957a9
> >> 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++
> >> b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -4508,12
> >> +4508,12 @@ static unsigned int stmmac_rx_buf1_len(struct
> >> stmmac_priv *priv, /* First descriptor, not last descriptor and
> >> not split header */ if (status & rx_not_ls)
> >> - return priv->dma_buf_sz;
> >> + return priv->dma_buf_sz - NET_SKB_PAD -
> >> NET_IP_ALIGN;
> >> plen = stmmac_get_rx_frame_len(priv, p, coe);
> >>
> >> /* First descriptor and last descriptor and not split
> >> header */
> >> - return min_t(unsigned int, priv->dma_buf_sz, plen);
> >> + return min_t(unsigned int, priv->dma_buf_sz - NET_SKB_PAD
> >> - NET_IP_ALIGN, plen); }
> >>
> >> static unsigned int stmmac_rx_buf2_len(struct stmmac_priv *priv,
> >
> > Feels like a major deficiency of the original patch. Happy to test a
> > more complete patch if/when you have one.
>
> I wont have time in the immediate future.
>
> Matteo, if you do not work on a fix, I suggest we revert
> a955318fe67ec0d962760b5ee58e74bffaf649b8 stmmac: align RX buffers
>
> before a more polished version can be submitted.
>
Better to use stmmac_rx_offset() so to have the correct length when
using XDP. Also, when XDP is enabled, the offset was
XDP_PACKET_HEADROOM (i.e. 256 bytes) even before the change, so it
could be already broken. Mark, can you try on the Jetson TX2 by
attaching an XDP program and see if it works without my change?
A possible fix, which takes in account also the XDP headroom for
stmmac_rx_buf1_len() only could be (only compile tested, I don't have
the hardware now):
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 7b8404a21544..b205f43f849a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -93,7 +93,7 @@ static int tc = TC_DEFAULT;
module_param(tc, int, 0644);
MODULE_PARM_DESC(tc, "DMA threshold control value");
-#define DEFAULT_BUFSIZE 1536
+#define DEFAULT_BUFSIZE 1536 + XDP_PACKET_HEADROOM + NET_IP_ALIGN
static int buf_sz = DEFAULT_BUFSIZE;
module_param(buf_sz, int, 0644);
MODULE_PARM_DESC(buf_sz, "DMA buffer size");
@@ -4508,12 +4508,12 @@ static unsigned int stmmac_rx_buf1_len(struct stmmac_priv *priv,
/* First descriptor, not last descriptor and not split header */
if (status & rx_not_ls)
- return priv->dma_buf_sz;
+ return priv->dma_buf_sz - stmmac_rx_offset(priv);
plen = stmmac_get_rx_frame_len(priv, p, coe);
/* First descriptor and last descriptor and not split header */
- return min_t(unsigned int, priv->dma_buf_sz, plen);
+ return min_t(unsigned int, priv->dma_buf_sz - stmmac_rx_offset(priv), plen);
}
static unsigned int stmmac_rx_buf2_len(struct stmmac_priv *priv,
--
per aspera ad upstream
More information about the linux-riscv
mailing list