[PATCH v4] dt-bindings: riscv: add starfive jh7100 bindings

[Drew Fustini]

On Wed, Aug 04, 2021 at 02:13:47PM -0700, Palmer Dabbelt wrote:
> On Wed, 04 Aug 2021 13:54:16 PDT (-0700), atishp at atishpatra.org wrote:
> > On Wed, Aug 4, 2021 at 1:33 PM Palmer Dabbelt <palmer at dabbelt.com> wrote:
> > > 
> > > On Thu, 15 Jul 2021 19:17:23 PDT (-0700), bmeng.cn at gmail.com wrote:
> > > > On Tue, Jul 13, 2021 at 2:34 PM Drew Fustini <drew at beagleboard.org> wrote:
> > > >>
> > > >> Add DT binding documentation for the StarFive JH7100 Soc [1] and the
> > > >> BeagleV Starlight JH7100 board [2].
> > > >>
> > > >> [1] https://github.com/starfive-tech/beaglev_doc
> > > >> [2] https://github.com/beagleboard/beaglev-starlight
> > > >>
> > > >> Signed-off-by: Drew Fustini <drew at beagleboard.org>
> > > >> ---
> > > >> v4 changes:
> > > >> - removed JH7100 SoC revision number after discussion with Geert
> > > >>
> > > >> v3 changes:
> > > >> - added revision number for the board and soc after question from Palmer
> > > >>
> > > >> v2 changes:
> > > >> - removed "items:" entry that only had "const: starfive,jh7100"
> > > >> - correct typo in Description:
> > > >>
> > > >> Results of running checks:
> > > >>   $ make -j8 ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- dt_binding_check \
> > > >>     DT_SCHEMA_FILES=Documentation/devicetree/bindings/riscv/starfive.yaml
> > > >>     CHKDT   Documentation/devicetree/bindings/processed-schema-examples.json
> > > >>     DTEX    Documentation/devicetree/bindings/riscv/starfive.example.dts
> > > >>     SCHEMA  Documentation/devicetree/bindings/processed-schema-examples.json
> > > >>     DTC     Documentation/devicetree/bindings/riscv/starfive.example.dt.yaml
> > > >>     CHECK   Documentation/devicetree/bindings/riscv/starfive.example.dt.yaml
> > > >>   $ make -j8 ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- dtbs_check \
> > > >>     DT_SCHEMA_FILES=Documentation/devicetree/bindings/riscv/starfive.yaml
> > > >>     SYNC    include/config/auto.conf.cmd
> > > >>     UPD     include/config/kernel.release
> > > >>     SCHEMA  Documentation/devicetree/bindings/processed-schema.json
> > > >>     DTC     arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dtb
> > > >>     DTC     arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dt.yaml
> > > >>     DTC     arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dt.yaml
> > > >>     DTC     arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dt.yaml
> > > >>     CHECK   arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dt.yaml
> > > >>     CHECK   arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dt.yaml
> > > >>     CHECK   arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dt.yaml
> > > >>
> > > >> The dts file is from vendor repo and is being cleaned up right now in
> > > >> preperation for submitting to the mailing list:
> > > >> https://github.com/starfive-tech/linux/tree/beaglev/arch/riscv/boot/dts/starfive
> > > >>
> > > >>  .../devicetree/bindings/riscv/starfive.yaml   | 27 +++++++++++++++++++
> > > >>  1 file changed, 27 insertions(+)
> > > >>  create mode 100644 Documentation/devicetree/bindings/riscv/starfive.yaml
> > > >>
> > > >
> > > > Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
> > > 
> > > Thanks.  This is on for-next, as Rob suggested taking it via the RISC-V
> > > tree.
> > > 
> > Given that beagleV starlight mass production is cancelled [1], are we
> > still upstreaming the support for this ?
> 
> I'm not sure, but I wasn't quite sure where to have that discussion.  I
> figured that the boards exist so there's no reason to shoot this down, given
> that it's just the vendor DT list.  At a bare minimum there's out of tree
> support for this, so having the DT strings defined seems sane as that's a
> defacto interface with bootloaders.
> 
> Maybe this is more of a question for Drew: I think we were all OK working
> through the issues with the first-run chip when there was going to be a lot
> of them, but with such a small number produced I'm not sure if there's going
> to be enough interested to take on all that effort.
> 
> I'm not quite sure where we stand on support for this: at some point there
> were some ideas floating around as to a way to support it without major
> software changes (allocating into the non-caching regions).  If that pans
> out then I'm fine handling this, at least from the RISC-V side, but if we're
> going to have to go through all the ISA/SBI stuff then it's probably not
> worth it.  Also not sure if there are a bunch of starfive-specific drivers
> that would be needed to make this boot, in which case it's probably best to
> wait for whatever comes next.

I think that the discontinued beta prototype could be useful as a native
build host for those of you that have it and don't have an Unmatched.

The arch_sync_dma RFC from Atish [1] is key to the board running
mainline. Most of the peripherals (USB, SD card, ethernet) are already
supported by upstream Cadence and Synopsys drivers. However, the vendor
kernel used ifdef's to flush the L2 cache at several points in those
drivers and subsystem cores because the peripherals are on a non-cache
coherent interconnect.

Without the proposed solution from Atish that uses the non-cached DDR
alias, then only serial console would work on mainline (assuming the 
system is running from a ramdisk that the vendor uboot loaded).

Thanks,
Drew

[1] https://lore.kernel.org/linux-riscv/CAOnJCU+ip1ccc9CrREi3c+15ue4Grcq+ENbQ+z_gh3CH249aAg@mail.gmail.com/T/#md422e9de172a179f8625c5bb595cf40e5942db67