[PATCH v4] dt-bindings: riscv: add starfive jh7100 bindings

[Atish Patra]

On Wed, Aug 4, 2021 at 1:33 PM Palmer Dabbelt <palmer at dabbelt.com> wrote:
>
> On Thu, 15 Jul 2021 19:17:23 PDT (-0700), bmeng.cn at gmail.com wrote:
> > On Tue, Jul 13, 2021 at 2:34 PM Drew Fustini <drew at beagleboard.org> wrote:
> >>
> >> Add DT binding documentation for the StarFive JH7100 Soc [1] and the
> >> BeagleV Starlight JH7100 board [2].
> >>
> >> [1] https://github.com/starfive-tech/beaglev_doc
> >> [2] https://github.com/beagleboard/beaglev-starlight
> >>
> >> Signed-off-by: Drew Fustini <drew at beagleboard.org>
> >> ---
> >> v4 changes:
> >> - removed JH7100 SoC revision number after discussion with Geert
> >>
> >> v3 changes:
> >> - added revision number for the board and soc after question from Palmer
> >>
> >> v2 changes:
> >> - removed "items:" entry that only had "const: starfive,jh7100"
> >> - correct typo in Description:
> >>
> >> Results of running checks:
> >>   $ make -j8 ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- dt_binding_check \
> >>     DT_SCHEMA_FILES=Documentation/devicetree/bindings/riscv/starfive.yaml
> >>     CHKDT   Documentation/devicetree/bindings/processed-schema-examples.json
> >>     DTEX    Documentation/devicetree/bindings/riscv/starfive.example.dts
> >>     SCHEMA  Documentation/devicetree/bindings/processed-schema-examples.json
> >>     DTC     Documentation/devicetree/bindings/riscv/starfive.example.dt.yaml
> >>     CHECK   Documentation/devicetree/bindings/riscv/starfive.example.dt.yaml
> >>   $ make -j8 ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- dtbs_check \
> >>     DT_SCHEMA_FILES=Documentation/devicetree/bindings/riscv/starfive.yaml
> >>     SYNC    include/config/auto.conf.cmd
> >>     UPD     include/config/kernel.release
> >>     SCHEMA  Documentation/devicetree/bindings/processed-schema.json
> >>     DTC     arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dtb
> >>     DTC     arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dt.yaml
> >>     DTC     arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dt.yaml
> >>     DTC     arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dt.yaml
> >>     CHECK   arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dt.yaml
> >>     CHECK   arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dt.yaml
> >>     CHECK   arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dt.yaml
> >>
> >> The dts file is from vendor repo and is being cleaned up right now in
> >> preperation for submitting to the mailing list:
> >> https://github.com/starfive-tech/linux/tree/beaglev/arch/riscv/boot/dts/starfive
> >>
> >>  .../devicetree/bindings/riscv/starfive.yaml   | 27 +++++++++++++++++++
> >>  1 file changed, 27 insertions(+)
> >>  create mode 100644 Documentation/devicetree/bindings/riscv/starfive.yaml
> >>
> >
> > Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
>
> Thanks.  This is on for-next, as Rob suggested taking it via the RISC-V
> tree.
>
Given that beagleV starlight mass production is cancelled [1], are we
still upstreaming the support for this ?

[1] https://www.cnx-software.com/2021/07/31/beaglev-starlight-sbc-wont-be-mass-manufactured-redesigned-beaglev-risc-v-sbc-expected-in-q1-2022/
> _______________________________________________
> linux-riscv mailing list
> linux-riscv at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv



-- 
Regards,
Atish