[PATCH v6] RISC-V: enable XIP
Vitaly Wool
vitaly.wool at konsulko.com
Tue Apr 6 08:54:34 BST 2021
On Tue, Apr 6, 2021 at 8:47 AM Alex Ghiti <alex at ghiti.fr> wrote:
>
> Hi Vitaly,
>
> Le 4/5/21 à 4:34 AM, Vitaly Wool a écrit :
> > On Sun, Apr 4, 2021 at 10:39 AM Vitaly Wool <vitaly.wool at konsulko.com> wrote:
> >>
> >> On Sat, Apr 3, 2021 at 12:00 PM Alex Ghiti <alex at ghiti.fr> wrote:
> >>>
> >>> Hi Vitaly,
> >>>
> >>> Le 4/1/21 à 7:10 AM, Alex Ghiti a écrit :
> >>>> Le 4/1/21 à 4:52 AM, Vitaly Wool a écrit :
> >>>>> Hi Alex,
> >>>>>
> >>>>> On Thu, Apr 1, 2021 at 10:11 AM Alex Ghiti <alex at ghiti.fr> wrote:
> >>>>>>
> >>>>>> Hi,
> >>>>>>
> >>>>>> Le 3/30/21 à 4:04 PM, Alex Ghiti a écrit :
> >>>>>>> Le 3/30/21 à 3:33 PM, Palmer Dabbelt a écrit :
> >>>>>>>> On Tue, 30 Mar 2021 11:39:10 PDT (-0700), alex at ghiti.fr wrote:
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> Le 3/30/21 à 2:26 AM, Vitaly Wool a écrit :
> >>>>>>>>>> On Tue, Mar 30, 2021 at 8:23 AM Palmer Dabbelt
> >>>>>>>>>> <palmerdabbelt at google.com> wrote:
> >>>>>>>>>>>
> >>>>>>>>>>> On Sun, 21 Mar 2021 17:12:15 PDT (-0700), vitaly.wool at konsulko.com
> >>>>>>>>>>> wrote:
> >>>>>>>>>>>> Introduce XIP (eXecute In Place) support for RISC-V platforms.
> >>>>>>>>>>>> It allows code to be executed directly from non-volatile storage
> >>>>>>>>>>>> directly addressable by the CPU, such as QSPI NOR flash which can
> >>>>>>>>>>>> be found on many RISC-V platforms. This makes way for significant
> >>>>>>>>>>>> optimization of RAM footprint. The XIP kernel is not compressed
> >>>>>>>>>>>> since it has to run directly from flash, so it will occupy more
> >>>>>>>>>>>> space on the non-volatile storage. The physical flash address used
> >>>>>>>>>>>> to link the kernel object files and for storing it has to be known
> >>>>>>>>>>>> at compile time and is represented by a Kconfig option.
> >>>>>>>>>>>>
> >>>>>>>>>>>> XIP on RISC-V will for the time being only work on MMU-enabled
> >>>>>>>>>>>> kernels.
> >>>>>>>>>>>>
> >>>>>>>>>>>> Signed-off-by: Vitaly Wool <vitaly.wool at konsulko.com>
> >>>>>>>>>>>>
> >>>>>>>>>>>> ---
> >>>>>>>>>>>>
> >>>>>>>>>>>> Changes in v2:
> >>>>>>>>>>>> - dedicated macro for XIP address fixup when MMU is not enabled
> >>>>>>>>>>>> yet
> >>>>>>>>>>>> o both for 32-bit and 64-bit RISC-V
> >>>>>>>>>>>> - SP is explicitly set to a safe place in RAM before
> >>>>>>>>>>>> __copy_data call
> >>>>>>>>>>>> - removed redundant alignment requirements in vmlinux-xip.lds.S
> >>>>>>>>>>>> - changed long -> uintptr_t typecast in __XIP_FIXUP macro.
> >>>>>>>>>>>> Changes in v3:
> >>>>>>>>>>>> - rebased against latest for-next
> >>>>>>>>>>>> - XIP address fixup macro now takes an argument
> >>>>>>>>>>>> - SMP related fixes
> >>>>>>>>>>>> Changes in v4:
> >>>>>>>>>>>> - rebased against the current for-next
> >>>>>>>>>>>> - less #ifdef's in C/ASM code
> >>>>>>>>>>>> - dedicated XIP_FIXUP_OFFSET assembler macro in head.S
> >>>>>>>>>>>> - C-specific definitions moved into #ifndef __ASSEMBLY__
> >>>>>>>>>>>> - Fixed multi-core boot
> >>>>>>>>>>>> Changes in v5:
> >>>>>>>>>>>> - fixed build error for non-XIP kernels
> >>>>>>>>>>>> Changes in v6:
> >>>>>>>>>>>> - XIP_PHYS_RAM_BASE config option renamed to PHYS_RAM_BASE
> >>>>>>>>>>>> - added PHYS_RAM_BASE_FIXED config flag to allow usage of
> >>>>>>>>>>>> PHYS_RAM_BASE in non-XIP configurations if needed
> >>>>>>>>>>>> - XIP_FIXUP macro rewritten with a tempoarary variable to avoid
> >>>>>>>>>>>> side
> >>>>>>>>>>>> effects
> >>>>>>>>>>>> - fixed crash for non-XIP kernels that don't use built-in DTB
> >>>>>>>>>>>
> >>>>>>>>>>> So v5 landed on for-next, which generally means it's best to avoid
> >>>>>>>>>>> re-spinning the patch and instead send along fixups. That said,
> >>>>>>>>>>> the v5
> >>>>>>>>>>> is causing some testing failures for me.
> >>>>>>>>>>>
> >>>>>>>>>>> I'm going to drop the v5 for now as I don't have time to test this
> >>>>>>>>>>> tonight. I'll try and take a look soon, as it will conflict with
> >>>>>>>>>>> Alex's
> >>>>>>>>>>> patches.
> >>>>>>>>>>
> >>>>>>>>>> I can come up with the incremental patch instead pretty much
> >>>>>>>>>> straight
> >>>>>>>>>> away if that works better.
> >>>>>>>>>>
> >>>>>>>>>> ~Vitaly
> >>>>>>>>>>
> >>>>>>>>>>>> arch/riscv/Kconfig | 49 ++++++++++-
> >>>>>>>>>>>> arch/riscv/Makefile | 8 +-
> >>>>>>>>>>>> arch/riscv/boot/Makefile | 13 +++
> >>>>>>>>>>>> arch/riscv/include/asm/pgtable.h | 65 ++++++++++++--
> >>>>>>>>>>>> arch/riscv/kernel/cpu_ops_sbi.c | 11 ++-
> >>>>>>>>>>>> arch/riscv/kernel/head.S | 49 ++++++++++-
> >>>>>>>>>>>> arch/riscv/kernel/head.h | 3 +
> >>>>>>>>>>>> arch/riscv/kernel/setup.c | 8 +-
> >>>>>>>>>>>> arch/riscv/kernel/vmlinux-xip.lds.S | 132
> >>>>>>>>>>>> ++++++++++++++++++++++++++++
> >>>>>>>>>>>> arch/riscv/kernel/vmlinux.lds.S | 6 ++
> >>>>>>>>>>>> arch/riscv/mm/init.c | 100 +++++++++++++++++++--
> >>>>>>>>>>>> 11 files changed, 426 insertions(+), 18 deletions(-)
> >>>>>>>>>>>> create mode 100644 arch/riscv/kernel/vmlinux-xip.lds.S
> >>>>>>>>>>>>
> >>>>>>>>>>>> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> >>>>>>>>>>>> index 8ea60a0a19ae..bd6f82240c34 100644
> >>>>>>>>>>>> --- a/arch/riscv/Kconfig
> >>>>>>>>>>>> +++ b/arch/riscv/Kconfig
> >>>>>>>>>>>> @@ -441,7 +441,7 @@ config EFI_STUB
> >>>>>>>>>>>>
> >>>>>>>>>>>> config EFI
> >>>>>>>>>>>> bool "UEFI runtime support"
> >>>>>>>>>>>> - depends on OF
> >>>>>>>>>>>> + depends on OF && !XIP_KERNEL
> >>>>>>>>>>>> select LIBFDT
> >>>>>>>>>>>> select UCS2_STRING
> >>>>>>>>>>>> select EFI_PARAMS_FROM_FDT
> >>>>>>>>>>>> @@ -465,11 +465,56 @@ config STACKPROTECTOR_PER_TASK
> >>>>>>>>>>>> def_bool y
> >>>>>>>>>>>> depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_TLS
> >>>>>>>>>>>>
> >>>>>>>>>>>> +config PHYS_RAM_BASE_FIXED
> >>>>>>>>>>>> + bool "Explicitly specified physical RAM address"
> >>>>>>>>>>>> + default n
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +config PHYS_RAM_BASE
> >>>>>>>>>>>> + hex "Platform Physical RAM address"
> >>>>>>>>>>>> + depends on PHYS_RAM_BASE_FIXED
> >>>>>>>>>>>> + default "0x80000000"
> >>>>>>>>>>>> + help
> >>>>>>>>>>>> + This is the physical address of RAM in the system. It has
> >>>>>>>>>>>> to be
> >>>>>>>>>>>> + explicitly specified to run early relocations of
> >>>>>>>>>>>> read-write data
> >>>>>>>>>>>> + from flash to RAM.
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +config XIP_KERNEL
> >>>>>>>>>>>> + bool "Kernel Execute-In-Place from ROM"
> >>>>>>>>>>>> + depends on MMU
> >>>>>>>>>>>> + select PHYS_RAM_BASE_FIXED
> >>>>>>>>>>>> + help
> >>>>>>>>>>>> + Execute-In-Place allows the kernel to run from
> >>>>>>>>>>>> non-volatile storage
> >>>>>>>>>>>> + directly addressable by the CPU, such as NOR flash. This
> >>>>>>>>>>>> saves RAM
> >>>>>>>>>>>> + space since the text section of the kernel is not loaded
> >>>>>>>>>>>> from flash
> >>>>>>>>>>>> + to RAM. Read-write sections, such as the data section and
> >>>>>>>>>>>> stack,
> >>>>>>>>>>>> + are still copied to RAM. The XIP kernel is not compressed
> >>>>>>>>>>>> since
> >>>>>>>>>>>> + it has to run directly from flash, so it will take more
> >>>>>>>>>>>> space to
> >>>>>>>>>>>> + store it. The flash address used to link the kernel
> >>>>>>>>>>>> object files,
> >>>>>>>>>>>> + and for storing it, is configuration dependent. Therefore,
> >>>>>>>>>>>> if you
> >>>>>>>>>>>> + say Y here, you must know the proper physical address
> >>>>>>>>>>>> where to
> >>>>>>>>>>>> + store the kernel image depending on your own flash memory
> >>>>>>>>>>>> usage.
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + Also note that the make target becomes "make xipImage"
> >>>>>>>>>>>> rather than
> >>>>>>>>>>>> + "make zImage" or "make Image". The final kernel binary to
> >>>>>>>>>>>> put in
> >>>>>>>>>>>> + ROM memory will be arch/riscv/boot/xipImage.
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + If unsure, say N.
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +config XIP_PHYS_ADDR
> >>>>>>>>>>>> + hex "XIP Kernel Physical Location"
> >>>>>>>>>>>> + depends on XIP_KERNEL
> >>>>>>>>>>>> + default "0x21000000"
> >>>>>>>>>>>> + help
> >>>>>>>>>>>> + This is the physical address in your flash memory the
> >>>>>>>>>>>> kernel will
> >>>>>>>>>>>> + be linked for and stored to. This address is dependent on
> >>>>>>>>>>>> your
> >>>>>>>>>>>> + own flash usage.
> >>>>>>>>>>>> +
> >>>>>>>>>>>> endmenu
> >>>>>>>>>>>>
> >>>>>>>>>>>> config BUILTIN_DTB
> >>>>>>>>>>>> - def_bool n
> >>>>>>>>>>>> + bool
> >>>>>>>>>>>> depends on OF
> >>>>>>>>>>>> + default y if XIP_KERNEL
> >>>>>>>>>>>>
> >>>>>>>>>>>> menu "Power management options"
> >>>>>>>>>>>>
> >>>>>>>>>>>> diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
> >>>>>>>>>>>> index 1368d943f1f3..8fcbec03974d 100644
> >>>>>>>>>>>> --- a/arch/riscv/Makefile
> >>>>>>>>>>>> +++ b/arch/riscv/Makefile
> >>>>>>>>>>>> @@ -82,7 +82,11 @@ CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
> >>>>>>>>>>>>
> >>>>>>>>>>>> # Default target when executing plain make
> >>>>>>>>>>>> boot := arch/riscv/boot
> >>>>>>>>>>>> +ifeq ($(CONFIG_XIP_KERNEL),y)
> >>>>>>>>>>>> +KBUILD_IMAGE := $(boot)/xipImage
> >>>>>>>>>>>> +else
> >>>>>>>>>>>> KBUILD_IMAGE := $(boot)/Image.gz
> >>>>>>>>>>>> +endif
> >>>>>>>>>>>>
> >>>>>>>>>>>> head-y := arch/riscv/kernel/head.o
> >>>>>>>>>>>>
> >>>>>>>>>>>> @@ -95,12 +99,14 @@ PHONY += vdso_install
> >>>>>>>>>>>> vdso_install:
> >>>>>>>>>>>> $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
> >>>>>>>>>>>>
> >>>>>>>>>>>> +ifneq ($(CONFIG_XIP_KERNEL),y)
> >>>>>>>>>>>> ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAAN),yy)
> >>>>>>>>>>>> KBUILD_IMAGE := $(boot)/loader.bin
> >>>>>>>>>>>> else
> >>>>>>>>>>>> KBUILD_IMAGE := $(boot)/Image.gz
> >>>>>>>>>>>> endif
> >>>>>>>>>>>> -BOOT_TARGETS := Image Image.gz loader loader.bin
> >>>>>>>>>>>> +endif
> >>>>>>>>>>>> +BOOT_TARGETS := Image Image.gz loader loader.bin xipImage
> >>>>>>>>>>>>
> >>>>>>>>>>>> all: $(notdir $(KBUILD_IMAGE))
> >>>>>>>>>>>>
> >>>>>>>>>>>> diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
> >>>>>>>>>>>> index 03404c84f971..6bf299f70c27 100644
> >>>>>>>>>>>> --- a/arch/riscv/boot/Makefile
> >>>>>>>>>>>> +++ b/arch/riscv/boot/Makefile
> >>>>>>>>>>>> @@ -17,8 +17,21 @@
> >>>>>>>>>>>> KCOV_INSTRUMENT := n
> >>>>>>>>>>>>
> >>>>>>>>>>>> OBJCOPYFLAGS_Image :=-O binary -R .note -R
> >>>>>>>>>>>> .note.gnu.build-id -R
> >>>>>>>>>>>> .comment -S
> >>>>>>>>>>>> +OBJCOPYFLAGS_xipImage :=-O binary -R .note -R .note.gnu.build-id
> >>>>>>>>>>>> -R .comment -S
> >>>>>>>>>>>>
> >>>>>>>>>>>> targets := Image Image.* loader loader.o loader.lds loader.bin
> >>>>>>>>>>>> +targets := Image Image.* loader loader.o loader.lds loader.bin
> >>>>>>>>>>>> xipImage
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +ifeq ($(CONFIG_XIP_KERNEL),y)
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +quiet_cmd_mkxip = $(quiet_cmd_objcopy)
> >>>>>>>>>>>> +cmd_mkxip = $(cmd_objcopy)
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +$(obj)/xipImage: vmlinux FORCE
> >>>>>>>>>>>> + $(call if_changed,mkxip)
> >>>>>>>>>>>> + @$(kecho) ' Physical Address of xipImage:
> >>>>>>>>>>>> $(CONFIG_XIP_PHYS_ADDR)'
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +endif
> >>>>>>>>>>>>
> >>>>>>>>>>>> $(obj)/Image: vmlinux FORCE
> >>>>>>>>>>>> $(call if_changed,objcopy)
> >>>>>>>>>>>> diff --git a/arch/riscv/include/asm/pgtable.h
> >>>>>>>>>>>> b/arch/riscv/include/asm/pgtable.h
> >>>>>>>>>>>> index ebf817c1bdf4..21a9b2f8d1c7 100644
> >>>>>>>>>>>> --- a/arch/riscv/include/asm/pgtable.h
> >>>>>>>>>>>> +++ b/arch/riscv/include/asm/pgtable.h
> >>>>>>>>>>>> @@ -11,6 +11,33 @@
> >>>>>>>>>>>>
> >>>>>>>>>>>> #include <asm/pgtable-bits.h>
> >>>>>>>>>>>>
> >>>>>>>>>>>> +#ifdef CONFIG_MMU
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> +#define VMALLOC_SIZE ((KERN_VIRT_SIZE >> 1) - SZ_16M)
> >>>>>>>>>>>> +#define VMALLOC_END (PAGE_OFFSET - SZ_16M - 1)
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#define XIP_OFFSET SZ_8M
> >>>>>>>>>>>> +#define XIP_MASK (SZ_8M - 1)
> >>>>>>>>>>>> +#define XIP_VIRT_ADDR(physaddr) \
> >>>>>>>>>>>> + (PAGE_OFFSET - XIP_OFFSET + ((physaddr) & XIP_MASK))
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#else
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> >>>>>>>>>>>> +#define VMALLOC_END (PAGE_OFFSET - 1)
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#else
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> +#define XIP_VIRT_ADDR(physaddr) (physaddr)
> >>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>>>>>>>> +#endif /* CONFIG_MMU */
> >>>>>>>>>>>> +
> >>>>>>>>>>>> #ifndef __ASSEMBLY__
> >>>>>>>>>>>>
> >>>>>>>>>>>> /* Page Upper Directory not used in RISC-V */
> >>>>>>>>>>>> @@ -21,9 +48,25 @@
> >>>>>>>>>>>>
> >>>>>>>>>>>> #ifdef CONFIG_MMU
> >>>>>>>>>>>>
> >>>>>>>>>>>> -#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> >>>>>>>>>>>> -#define VMALLOC_END (PAGE_OFFSET - 1)
> >>>>>>>>>>>> -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> +/*
> >>>>>>>>>>>> + * Since we use sections to map it, this macro replaces the
> >>>>>>>>>>>> physical address
> >>>>>>>>>>>> + * with its virtual address while keeping offset from the base
> >>>>>>>>>>>> section.
> >>>>>>>>>>>> + */
> >>>>>>>>>>>> +#define XIP_PHYS_ADDR(va) \
> >>>>>>>>>>>> + ((uintptr_t)(va) - PAGE_OFFSET + XIP_OFFSET +
> >>>>>>>>>>>> CONFIG_XIP_PHYS_ADDR)
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#define XIP_VIRT_ADDR_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#define XIP_FIXUP(addr) ({ \
> >>>>>>>>>>>> + uintptr_t __a = (uintptr_t)(addr); \
> >>>>>>>>>>>> + (__a >= CONFIG_XIP_PHYS_ADDR && \
> >>>>>>>>>>>> + __a < CONFIG_XIP_PHYS_ADDR + SZ_16M) ? \
> >>>>>>>>>>>> + __a - CONFIG_XIP_PHYS_ADDR + CONFIG_PHYS_RAM_BASE -
> >>>>>>>>>>>> XIP_OFFSET : __a; \
> >>>>>>>>>>>> +})
> >>>>>>>>>>>> +#else
> >>>>>>>>>>>> +#define XIP_FIXUP(addr) (addr)
> >>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>>>>>>>>
> >>>>>>>>>>>> #define BPF_JIT_REGION_SIZE (SZ_128M)
> >>>>>>>>>>>> #define BPF_JIT_REGION_START (PAGE_OFFSET -
> >>>>>>>>>>>> BPF_JIT_REGION_SIZE)
> >>>>>>>>>>>> @@ -484,8 +527,20 @@ static inline int
> >>>>>>>>>>>> ptep_clear_flush_young(struct vm_area_struct *vma,
> >>>>>>>>>>>>
> >>>>>>>>>>>> #define kern_addr_valid(addr) (1) /* FIXME */
> >>>>>>>>>>>>
> >>>>>>>>>>>> -extern void *dtb_early_va;
> >>>>>>>>>>>> -extern uintptr_t dtb_early_pa;
> >>>>>>>>>>>> +extern void *_dtb_early_va;
> >>>>>>>>>>>> +extern uintptr_t _dtb_early_pa;
> >>>>>>>>>>>> +#if defined(CONFIG_XIP_KERNEL) && defined(CONFIG_MMU)
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#define dtb_early_va (*(void **)XIP_FIXUP(&_dtb_early_va))
> >>>>>>>>>>>> +#define dtb_early_pa (*(uintptr_t *)XIP_FIXUP(&_dtb_early_pa))
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#else
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#define dtb_early_va _dtb_early_va
> >>>>>>>>>>>> +#define dtb_early_pa _dtb_early_pa
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>>>>>>>> +
> >>>>>>>>>>>> void setup_bootmem(void);
> >>>>>>>>>>>> void paging_init(void);
> >>>>>>>>>>>> void misc_mem_init(void);
> >>>>>>>>>>>> diff --git a/arch/riscv/kernel/cpu_ops_sbi.c
> >>>>>>>>>>>> b/arch/riscv/kernel/cpu_ops_sbi.c
> >>>>>>>>>>>> index 685fae72b7f5..2413c2997350 100644
> >>>>>>>>>>>> --- a/arch/riscv/kernel/cpu_ops_sbi.c
> >>>>>>>>>>>> +++ b/arch/riscv/kernel/cpu_ops_sbi.c
> >>>>>>>>>>>> @@ -53,10 +53,19 @@ static int sbi_hsm_hart_get_status(unsigned
> >>>>>>>>>>>> long hartid)
> >>>>>>>>>>>> }
> >>>>>>>>>>>> #endif
> >>>>>>>>>>>>
> >>>>>>>>>>>> +static inline unsigned long get_secondary_start_phys(void)
> >>>>>>>>>>>> +{
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> + return XIP_PHYS_ADDR(secondary_start_sbi);
> >>>>>>>>>>>> +#else
> >>>>>>>>>>>> + return __pa_symbol(secondary_start_sbi);
> >>>>>>>>>>>> +#endif
> >>>>>>>>>>>> +}
> >>>>>>>>>>>> +
> >>>>>>>>>>>> static int sbi_cpu_start(unsigned int cpuid, struct task_struct
> >>>>>>>>>>>> *tidle)
> >>>>>>>>>>>> {
> >>>>>>>>>>>> int rc;
> >>>>>>>>>>>> - unsigned long boot_addr = __pa_symbol(secondary_start_sbi);
> >>>>>>>>>>>> + unsigned long boot_addr = get_secondary_start_phys();
> >>>>>>>>>>>> int hartid = cpuid_to_hartid_map(cpuid);
> >>>>>>>>>>>>
> >>>>>>>>>>>> cpu_update_secondary_bootdata(cpuid, tidle);
> >>>>>>>>>>>> diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
> >>>>>>>>>>>> index f5a9bad86e58..bbe74e37914f 100644
> >>>>>>>>>>>> --- a/arch/riscv/kernel/head.S
> >>>>>>>>>>>> +++ b/arch/riscv/kernel/head.S
> >>>>>>>>>>>> @@ -9,11 +9,23 @@
> >>>>>>>>>>>> #include <linux/linkage.h>
> >>>>>>>>>>>> #include <asm/thread_info.h>
> >>>>>>>>>>>> #include <asm/page.h>
> >>>>>>>>>>>> +#include <asm/pgtable.h>
> >>>>>>>>>>>> #include <asm/csr.h>
> >>>>>>>>>>>> #include <asm/hwcap.h>
> >>>>>>>>>>>> #include <asm/image.h>
> >>>>>>>>>>>> #include "efi-header.S"
> >>>>>>>>>>>>
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> +.macro XIP_FIXUP_OFFSET reg
> >>>>>>>>>>>> + REG_L t0, _xip_fixup
> >>>>>>>>>>>> + add \reg, \reg, t0
> >>>>>>>>>>>> +.endm
> >>>>>>>>>>>> +_xip_fixup: .dword CONFIG_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR -
> >>>>>>>>>>>> XIP_OFFSET
> >>>>>>>>>>>> +#else
> >>>>>>>>>>>> +.macro XIP_FIXUP_OFFSET reg
> >>>>>>>>>>>> +.endm
> >>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>>>>>>>> +
> >>>>>>>>>>>> __HEAD
> >>>>>>>>>>>> ENTRY(_start)
> >>>>>>>>>>>> /*
> >>>>>>>>>>>> @@ -69,7 +81,11 @@ pe_head_start:
> >>>>>>>>>>>> #ifdef CONFIG_MMU
> >>>>>>>>>>>> relocate:
> >>>>>>>>>>>> /* Relocate return address */
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> + li a1, XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> >>>>>>>>>>>> +#else
> >>>>>>>>>>>> li a1, PAGE_OFFSET
> >>>>>>>>>>>> +#endif
> >>>>>>>>>>>> la a2, _start
> >>>>>>>>>>>> sub a1, a1, a2
> >>>>>>>>>>>> add ra, ra, a1
> >>>>>>>>>>>> @@ -91,6 +107,7 @@ relocate:
> >>>>>>>>>>>> * to ensure the new translations are in use.
> >>>>>>>>>>>> */
> >>>>>>>>>>>> la a0, trampoline_pg_dir
> >>>>>>>>>>>> + XIP_FIXUP_OFFSET a0
> >>>>>>>>>>>> srl a0, a0, PAGE_SHIFT
> >>>>>>>>>>>> or a0, a0, a1
> >>>>>>>>>>>> sfence.vma
> >>>>>>>>>>>> @@ -144,7 +161,9 @@ secondary_start_sbi:
> >>>>>>>>>>>>
> >>>>>>>>>>>> slli a3, a0, LGREG
> >>>>>>>>>>>> la a4, __cpu_up_stack_pointer
> >>>>>>>>>>>> + XIP_FIXUP_OFFSET a4
> >>>>>>>>>>>> la a5, __cpu_up_task_pointer
> >>>>>>>>>>>> + XIP_FIXUP_OFFSET a5
> >>>>>>>>>>>> add a4, a3, a4
> >>>>>>>>>>>> add a5, a3, a5
> >>>>>>>>>>>> REG_L sp, (a4)
> >>>>>>>>>>>> @@ -156,6 +175,7 @@ secondary_start_common:
> >>>>>>>>>>>> #ifdef CONFIG_MMU
> >>>>>>>>>>>> /* Enable virtual memory and relocate to virtual
> >>>>>>>>>>>> address */
> >>>>>>>>>>>> la a0, swapper_pg_dir
> >>>>>>>>>>>> + XIP_FIXUP_OFFSET a0
> >>>>>>>>>>>> call relocate
> >>>>>>>>>>>> #endif
> >>>>>>>>>>>> call setup_trap_vector
> >>>>>>>>>>>> @@ -236,12 +256,33 @@ pmp_done:
> >>>>>>>>>>>> .Lgood_cores:
> >>>>>>>>>>>> #endif
> >>>>>>>>>>>>
> >>>>>>>>>>>> +#ifndef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> /* Pick one hart to run the main boot sequence */
> >>>>>>>>>>>> la a3, hart_lottery
> >>>>>>>>>>>> li a2, 1
> >>>>>>>>>>>> amoadd.w a3, a2, (a3)
> >>>>>>>>>>>> bnez a3, .Lsecondary_start
> >>>>>>>>>>>>
> >>>>>>>>>>>> +#else
> >>>>>>>>>>>> + /* hart_lottery in flash contains a magic number */
> >>>>>>>>>>>> + la a3, hart_lottery
> >>>>>>>>>>>> + mv a2, a3
> >>>>>>>>>>>> + XIP_FIXUP_OFFSET a2
> >>>>>>>>>>>> + lw t1, (a3)
> >>>>>>>>>>>> + amoswap.w t0, t1, (a2)
> >>>>>>>>>>>> + /* first time here if hart_lottery in RAM is not set */
> >>>>>>>>>>>> + beq t0, t1, .Lsecondary_start
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + la sp, _end + THREAD_SIZE
> >>>>>>>>>>>> + XIP_FIXUP_OFFSET sp
> >>>>>>>>>>>> + mv s0, a0
> >>>>>>>>>>>> + call __copy_data
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + /* Restore a0 copy */
> >>>>>>>>>>>> + mv a0, s0
> >>>>>>>>>>>> +#endif
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#ifndef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> /* Clear BSS for flat non-ELF images */
> >>>>>>>>>>>> la a3, __bss_start
> >>>>>>>>>>>> la a4, __bss_stop
> >>>>>>>>>>>> @@ -251,15 +292,18 @@ clear_bss:
> >>>>>>>>>>>> add a3, a3, RISCV_SZPTR
> >>>>>>>>>>>> blt a3, a4, clear_bss
> >>>>>>>>>>>> clear_bss_done:
> >>>>>>>>>>>> -
> >>>>>>>>>>>> +#endif
> >>>>>>>>>>>> /* Save hart ID and DTB physical address */
> >>>>>>>>>>>> mv s0, a0
> >>>>>>>>>>>> mv s1, a1
> >>>>>>>>>>>> +
> >>>>>>>>>>>> la a2, boot_cpu_hartid
> >>>>>>>>>>>> + XIP_FIXUP_OFFSET a2
> >>>>>>>>>>>> REG_S a0, (a2)
> >>>>>>>>>>>>
> >>>>>>>>>>>> /* Initialize page tables and relocate to virtual
> >>>>>>>>>>>> addresses */
> >>>>>>>>>>>> la sp, init_thread_union + THREAD_SIZE
> >>>>>>>>>>>> + XIP_FIXUP_OFFSET sp
> >>>>>>>>>>>> #ifdef CONFIG_BUILTIN_DTB
> >>>>>>>>>>>> la a0, __dtb_start
> >>>>>>>>>>>> #else
> >>>>>>>>>>>> @@ -268,6 +312,7 @@ clear_bss_done:
> >>>>>>>>>>>> call setup_vm
> >>>>>>>>>>>> #ifdef CONFIG_MMU
> >>>>>>>>>>>> la a0, early_pg_dir
> >>>>>>>>>>>> + XIP_FIXUP_OFFSET a0
> >>>>>>>>>>>> call relocate
> >>>>>>>>>>>> #endif /* CONFIG_MMU */
> >>>>>>>>>>>>
> >>>>>>>>>>>> @@ -292,7 +337,9 @@ clear_bss_done:
> >>>>>>>>>>>>
> >>>>>>>>>>>> slli a3, a0, LGREG
> >>>>>>>>>>>> la a1, __cpu_up_stack_pointer
> >>>>>>>>>>>> + XIP_FIXUP_OFFSET a1
> >>>>>>>>>>>> la a2, __cpu_up_task_pointer
> >>>>>>>>>>>> + XIP_FIXUP_OFFSET a2
> >>>>>>>>>>>> add a1, a3, a1
> >>>>>>>>>>>> add a2, a3, a2
> >>>>>>>>>>>>
> >>>>>>>>>>>> diff --git a/arch/riscv/kernel/head.h b/arch/riscv/kernel/head.h
> >>>>>>>>>>>> index b48dda3d04f6..aabbc3ac3e48 100644
> >>>>>>>>>>>> --- a/arch/riscv/kernel/head.h
> >>>>>>>>>>>> +++ b/arch/riscv/kernel/head.h
> >>>>>>>>>>>> @@ -12,6 +12,9 @@ extern atomic_t hart_lottery;
> >>>>>>>>>>>>
> >>>>>>>>>>>> asmlinkage void do_page_fault(struct pt_regs *regs);
> >>>>>>>>>>>> asmlinkage void __init setup_vm(uintptr_t dtb_pa);
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> +asmlinkage void __init __copy_data(void);
> >>>>>>>>>>>> +#endif
> >>>>>>>>>>>>
> >>>>>>>>>>>> extern void *__cpu_up_stack_pointer[];
> >>>>>>>>>>>> extern void *__cpu_up_task_pointer[];
> >>>>>>>>>>>> diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
> >>>>>>>>>>>> index e85bacff1b50..a0384c72c272 100644
> >>>>>>>>>>>> --- a/arch/riscv/kernel/setup.c
> >>>>>>>>>>>> +++ b/arch/riscv/kernel/setup.c
> >>>>>>>>>>>> @@ -50,7 +50,11 @@ struct screen_info screen_info
> >>>>>>>>>>>> __section(".data") = {
> >>>>>>>>>>>> * This is used before the kernel initializes the BSS so it
> >>>>>>>>>>>> can't be in the
> >>>>>>>>>>>> * BSS.
> >>>>>>>>>>>> */
> >>>>>>>>>>>> -atomic_t hart_lottery __section(".sdata");
> >>>>>>>>>>>> +atomic_t hart_lottery __section(".sdata")
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> += ATOMIC_INIT(0xC001BEEF)
> >>>>>>>>>>>> +#endif
> >>>>>>>>>>>> +;
> >>>>>>>>>>>> unsigned long boot_cpu_hartid;
> >>>>>>>>>>>> static DEFINE_PER_CPU(struct cpu, cpu_devices);
> >>>>>>>>>>>>
> >>>>>>>>>>>> @@ -254,7 +258,7 @@ void __init setup_arch(char **cmdline_p)
> >>>>>>>>>>>> #if IS_ENABLED(CONFIG_BUILTIN_DTB)
> >>>>>>>>>>>> unflatten_and_copy_device_tree();
> >>>>>>>>>>>> #else
> >>>>>>>>>>>> - if (early_init_dt_verify(__va(dtb_early_pa)))
> >>>>>>>>>>>> + if (early_init_dt_verify(__va(XIP_FIXUP(dtb_early_pa))))
> >>>>>>>>>>>> unflatten_device_tree();
> >>>>>>>>>>>> else
> >>>>>>>>>>>> pr_err("No DTB found in kernel mappings\n");
> >>>>>>>>>>>> diff --git a/arch/riscv/kernel/vmlinux-xip.lds.S
> >>>>>>>>>>>> b/arch/riscv/kernel/vmlinux-xip.lds.S
> >>>>>>>>>>>> new file mode 100644
> >>>>>>>>>>>> index 000000000000..9f0f08c34cd3
> >>>>>>>>>>>> --- /dev/null
> >>>>>>>>>>>> +++ b/arch/riscv/kernel/vmlinux-xip.lds.S
> >>>>>>>>>>>> @@ -0,0 +1,132 @@
> >>>>>>>>>>>> +/* SPDX-License-Identifier: GPL-2.0-only */
> >>>>>>>>>>>> +/*
> >>>>>>>>>>>> + * Copyright (C) 2012 Regents of the University of California
> >>>>>>>>>>>> + * Copyright (C) 2017 SiFive
> >>>>>>>>>>>> + * Copyright (C) 2020 Vitaly Wool, Konsulko AB
> >>>>>>>>>>>> + */
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#define LOAD_OFFSET XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> >>>>>>>>>>>> +/* No __ro_after_init data in the .rodata section - which will
> >>>>>>>>>>>> always be ro */
> >>>>>>>>>>>> +#define RO_AFTER_INIT_DATA
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#include <asm/vmlinux.lds.h>
> >>>>>>>>>>>> +#include <asm/page.h>
> >>>>>>>>>>>> +#include <asm/pgtable.h>
> >>>>>>>>>>>> +#include <asm/cache.h>
> >>>>>>>>>>>> +#include <asm/thread_info.h>
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +OUTPUT_ARCH(riscv)
> >>>>>>>>>>>> +ENTRY(_start)
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +jiffies = jiffies_64;
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +SECTIONS
> >>>>>>>>>>>> +{
> >>>>>>>>>>>> + /* Beginning of code and text segment */
> >>>>>>>>>>>> + . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
> >>>>>>>>>>>> + _xiprom = .;
> >>>>>>>>>>>> + _start = .;
> >>>>>>>>>>>> + HEAD_TEXT_SECTION
> >>>>>>>>>>>> + INIT_TEXT_SECTION(PAGE_SIZE)
> >>>>>>>>>>>> + /* we have to discard exit text and such at runtime, not
> >>>>>>>>>>>> link time */
> >>>>>>>>>>>> + .exit.text :
> >>>>>>>>>>>> + {
> >>>>>>>>>>>> + EXIT_TEXT
> >>>>>>>>>>>> + }
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + .text : {
> >>>>>>>>>>>> + _text = .;
> >>>>>>>>>>>> + _stext = .;
> >>>>>>>>>>>> + TEXT_TEXT
> >>>>>>>>>>>> + SCHED_TEXT
> >>>>>>>>>>>> + CPUIDLE_TEXT
> >>>>>>>>>>>> + LOCK_TEXT
> >>>>>>>>>>>> + KPROBES_TEXT
> >>>>>>>>>>>> + ENTRY_TEXT
> >>>>>>>>>>>> + IRQENTRY_TEXT
> >>>>>>>>>>>> + SOFTIRQENTRY_TEXT
> >>>>>>>>>>>> + *(.fixup)
> >>>>>>>>>>>> + _etext = .;
> >>>>>>>>>>>> + }
> >>>>>>>>>>>> + RO_DATA(L1_CACHE_BYTES)
> >>>>>>>>>>>> + .srodata : {
> >>>>>>>>>>>> + *(.srodata*)
> >>>>>>>>>>>> + }
> >>>>>>>>>>>> + .init.rodata : {
> >>>>>>>>>>>> + INIT_SETUP(16)
> >>>>>>>>>>>> + INIT_CALLS
> >>>>>>>>>>>> + CON_INITCALL
> >>>>>>>>>>>> + INIT_RAM_FS
> >>>>>>>>>>>> + }
> >>>>>>>>>>>> + _exiprom = .; /* End of XIP ROM area */
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +/*
> >>>>>>>>>>>> + * From this point, stuff is considered writable and will be
> >>>>>>>>>>>> copied to RAM
> >>>>>>>>>>>> + */
> >>>>>>>>>>>> + __data_loc = ALIGN(16); /* location in file */
> >>>>>>>>>>>> + . = PAGE_OFFSET; /* location in memory */
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + _sdata = .; /* Start of data section */
> >>>>>>>>>>>> + _data = .;
> >>>>>>>>>>>> + RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
> >>>>>>>>>>>> + _edata = .;
> >>>>>>>>>>>> + __start_ro_after_init = .;
> >>>>>>>>>>>> + .data.ro_after_init : AT(ADDR(.data.ro_after_init) -
> >>>>>>>>>>>> LOAD_OFFSET) {
> >>>>>>>>>>>> + *(.data..ro_after_init)
> >>>>>>>>>>>> + }
> >>>>>>>>>>>> + __end_ro_after_init = .;
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + . = ALIGN(PAGE_SIZE);
> >>>>>>>>>>>> + __init_begin = .;
> >>>>>>>>>>>> + .init.data : {
> >>>>>>>>>>>> + INIT_DATA
> >>>>>>>>>>>> + }
> >>>>>>>>>>>> + .exit.data : {
> >>>>>>>>>>>> + EXIT_DATA
> >>>>>>>>>>>> + }
> >>>>>>>>>>>> + . = ALIGN(8);
> >>>>>>>>>>>> + __soc_early_init_table : {
> >>>>>>>>>>>> + __soc_early_init_table_start = .;
> >>>>>>>>>>>> + KEEP(*(__soc_early_init_table))
> >>>>>>>>>>>> + __soc_early_init_table_end = .;
> >>>>>>>>>>>> + }
> >>>>>>>>>>>> + __soc_builtin_dtb_table : {
> >>>>>>>>>>>> + __soc_builtin_dtb_table_start = .;
> >>>>>>>>>>>> + KEEP(*(__soc_builtin_dtb_table))
> >>>>>>>>>>>> + __soc_builtin_dtb_table_end = .;
> >>>>>>>>>>>> + }
> >>>>>>>>>>>> + PERCPU_SECTION(L1_CACHE_BYTES)
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + . = ALIGN(PAGE_SIZE);
> >>>>>>>>>>>> + __init_end = .;
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + .sdata : {
> >>>>>>>>>>>> + __global_pointer$ = . + 0x800;
> >>>>>>>>>>>> + *(.sdata*)
> >>>>>>>>>>>> + *(.sbss*)
> >>>>>>>>>>>> + }
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
> >>>>>>>>>>>> + EXCEPTION_TABLE(0x10)
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + .rel.dyn : AT(ADDR(.rel.dyn) - LOAD_OFFSET) {
> >>>>>>>>>>>> + *(.rel.dyn*)
> >>>>>>>>>>>> + }
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + /*
> >>>>>>>>>>>> + * End of copied data. We need a dummy section to get its
> >>>>>>>>>>>> LMA.
> >>>>>>>>>>>> + * Also located before final ALIGN() as trailing padding is
> >>>>>>>>>>>> not stored
> >>>>>>>>>>>> + * in the resulting binary file and useless to copy.
> >>>>>>>>>>>> + */
> >>>>>>>>>>>> + .data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { }
> >>>>>>>>>>>> + _edata_loc = LOADADDR(.data.endmark);
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + . = ALIGN(PAGE_SIZE);
> >>>>>>>>>>>> + _end = .;
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + STABS_DEBUG
> >>>>>>>>>>>> + DWARF_DEBUG
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + DISCARDS
> >>>>>>>>>>>> +}
> >>>>>>>>>>>> diff --git a/arch/riscv/kernel/vmlinux.lds.S
> >>>>>>>>>>>> b/arch/riscv/kernel/vmlinux.lds.S
> >>>>>>>>>>>> index de03cb22d0e9..6745ec325930 100644
> >>>>>>>>>>>> --- a/arch/riscv/kernel/vmlinux.lds.S
> >>>>>>>>>>>> +++ b/arch/riscv/kernel/vmlinux.lds.S
> >>>>>>>>>>>> @@ -4,7 +4,12 @@
> >>>>>>>>>>>> * Copyright (C) 2017 SiFive
> >>>>>>>>>>>> */
> >>>>>>>>>>>>
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> +#include "vmlinux-xip.lds.S"
> >>>>>>>>>>>> +#else
> >>>>>>>>>>>> +
> >>>>>>>>>>>> #define LOAD_OFFSET PAGE_OFFSET
> >>>>>>>>>>>> +
> >>>>>>>>>>>> #include <asm/vmlinux.lds.h>
> >>>>>>>>>>>> #include <asm/page.h>
> >>>>>>>>>>>> #include <asm/cache.h>
> >>>>>>>>>>>> @@ -132,3 +137,4 @@ SECTIONS
> >>>>>>>>>>>>
> >>>>>>>>>>>> DISCARDS
> >>>>>>>>>>>> }
> >>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>>>>>>>> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
> >>>>>>>>>>>> index 7f5036fbee8c..efe649d41f95 100644
> >>>>>>>>>>>> --- a/arch/riscv/mm/init.c
> >>>>>>>>>>>> +++ b/arch/riscv/mm/init.c
> >>>>>>>>>>>> @@ -31,8 +31,8 @@ EXPORT_SYMBOL(empty_zero_page);
> >>>>>>>>>>>>
> >>>>>>>>>>>> extern char _start[];
> >>>>>>>>>>>> #define DTB_EARLY_BASE_VA PGDIR_SIZE
> >>>>>>>>>>>> -void *dtb_early_va __initdata;
> >>>>>>>>>>>> -uintptr_t dtb_early_pa __initdata;
> >>>>>>>>>>>> +void *_dtb_early_va __initdata;
> >>>>>>>>>>>> +uintptr_t _dtb_early_pa __initdata;
> >>>>>>>>>>>>
> >>>>>>>>>>>> struct pt_alloc_ops {
> >>>>>>>>>>>> pte_t *(*get_pte_virt)(phys_addr_t pa);
> >>>>>>>>>>>> @@ -88,6 +88,10 @@ static void print_vm_layout(void)
> >>>>>>>>>>>> (unsigned long)VMALLOC_END);
> >>>>>>>>>>>> print_mlm("lowmem", (unsigned long)PAGE_OFFSET,
> >>>>>>>>>>>> (unsigned long)high_memory);
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> + print_mlm("xip", (unsigned long)XIP_VIRT_ADDR_START,
> >>>>>>>>>>>> + (unsigned long)XIP_VIRT_ADDR_START + SZ_16M);
> >>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>>>>>>>> }
> >>>>>>>>>>>> #else
> >>>>>>>>>>>> static void print_vm_layout(void) { }
> >>>>>>>>>>>> @@ -113,6 +117,10 @@ void __init setup_bootmem(void)
> >>>>>>>>>>>> phys_addr_t dram_end = memblock_end_of_DRAM();
> >>>>>>>>>>>> phys_addr_t max_mapped_addr = __pa(~(ulong)0);
> >>>>>>>>>>>>
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> + vmlinux_start = __pa_symbol(&_sdata);
> >>>>>>>>>>>> +#endif
> >>>>>>>>>>>> +
> >>>>>>>>>>>> /* The maximal physical memory size is -PAGE_OFFSET. */
> >>>>>>>>>>>> memblock_enforce_memory_limit(-PAGE_OFFSET);
> >>>>>>>>>>>>
> >>>>>>>>>>>> @@ -149,11 +157,27 @@ void __init setup_bootmem(void)
> >>>>>>>>>>>> memblock_allow_resize();
> >>>>>>>>>>>> }
> >>>>>>>>>>>>
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +extern char _xiprom[], _exiprom[];
> >>>>>>>>>>>> +extern char _sdata[], _edata[];
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>>>>>>>> +
> >>>>>>>>>>>> #ifdef CONFIG_MMU
> >>>>>>>>>>>> -static struct pt_alloc_ops pt_ops;
> >>>>>>>>>>>> +static struct pt_alloc_ops _pt_ops;
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> +#define pt_ops (*(struct pt_alloc_ops *)XIP_FIXUP(&_pt_ops))
> >>>>>>>>>>>> +#else
> >>>>>>>>>>>> +#define pt_ops _pt_ops
> >>>>>>>>>>>> +#endif
> >>>>>>>>>>>>
> >>>>>>>>>>>> unsigned long va_pa_offset;
> >>>>>>>>>>>> EXPORT_SYMBOL(va_pa_offset);
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> +#define va_pa_offset (*((unsigned long
> >>>>>>>>>>>> *)XIP_FIXUP(&va_pa_offset)))
> >>>>>>>>>>>> +#endif
> >>>>>>>>>>>> unsigned long pfn_base;
> >>>>>>>>>>>> EXPORT_SYMBOL(pfn_base);
> >>>>>>>>>>>>
> >>>>>>>>>>>> @@ -163,6 +187,12 @@ pte_t fixmap_pte[PTRS_PER_PTE]
> >>>>>>>>>>>> __page_aligned_bss;
> >>>>>>>>>>>>
> >>>>>>>>>>>> pgd_t early_pg_dir[PTRS_PER_PGD] __initdata
> >>>>>>>>>>>> __aligned(PAGE_SIZE);
> >>>>>>>>>>>>
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> +#define trampoline_pg_dir ((pgd_t
> >>>>>>>>>>>> *)XIP_FIXUP(trampoline_pg_dir))
> >>>>>>>>>>>> +#define fixmap_pte ((pte_t *)XIP_FIXUP(fixmap_pte))
> >>>>>>>>>>>> +#define early_pg_dir ((pgd_t *)XIP_FIXUP(early_pg_dir))
> >>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>>>>>>>> +
> >>>>>>>>>>>> void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys,
> >>>>>>>>>>>> pgprot_t prot)
> >>>>>>>>>>>> {
> >>>>>>>>>>>> unsigned long addr = __fix_to_virt(idx);
> >>>>>>>>>>>> @@ -238,6 +268,15 @@ pmd_t fixmap_pmd[PTRS_PER_PMD]
> >>>>>>>>>>>> __page_aligned_bss;
> >>>>>>>>>>>> pmd_t early_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
> >>>>>>>>>>>> pmd_t early_dtb_pmd[PTRS_PER_PMD] __initdata
> >>>>>>>>>>>> __aligned(PAGE_SIZE);
> >>>>>>>>>>>>
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> +pmd_t xip_pmd[PTRS_PER_PMD] __page_aligned_bss;
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#define trampoline_pmd ((pmd_t *)XIP_FIXUP(trampoline_pmd))
> >>>>>>>>>>>> +#define fixmap_pmd ((pmd_t *)XIP_FIXUP(fixmap_pmd))
> >>>>>>>>>>>> +#define xip_pmd ((pmd_t *)XIP_FIXUP(xip_pmd))
> >>>>>>>>>>>> +#define early_pmd ((pmd_t *)XIP_FIXUP(early_pmd))
> >>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>>>>>>>> +
> >>>>>>>>>>>> static pmd_t *__init get_pmd_virt_early(phys_addr_t pa)
> >>>>>>>>>>>> {
> >>>>>>>>>>>> /* Before MMU is enabled */
> >>>>>>>>>>>> @@ -354,6 +393,19 @@ static uintptr_t __init
> >>>>>>>>>>>> best_map_size(phys_addr_t base, phys_addr_t size)
> >>>>>>>>>>>> return PMD_SIZE;
> >>>>>>>>>>>> }
> >>>>>>>>>>>>
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> +/* called from head.S with MMU off */
> >>>>>>>>>>>> +asmlinkage void __init __copy_data(void)
> >>>>>>>>>>>> +{
> >>>>>>>>>>>> + void *from = (void *)(&_sdata);
> >>>>>>>>>>>> + void *end = (void *)(&_end);
> >>>>>>>>>>>> + void *to = (void *)CONFIG_PHYS_RAM_BASE;
> >>>>>>>>>>>> + size_t sz = (size_t)(end - from);
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + memcpy(to, from, sz);
> >>>>>>>>>>>> +}
> >>>>>>>>>>>> +#endif
> >>>>>>>>>>>> +
> >>>>>>>>>>>> /*
> >>>>>>>>>>>> * setup_vm() is called from head.S with MMU-off.
> >>>>>>>>>>>> *
> >>>>>>>>>>>> @@ -374,7 +426,8 @@ static uintptr_t __init
> >>>>>>>>>>>> best_map_size(phys_addr_t base, phys_addr_t size)
> >>>>>>>>>>>>
> >>>>>>>>>>>> asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> >>>>>>>>>>>> {
> >>>>>>>>>>>> - uintptr_t va, pa, end_va;
> >>>>>>>>>>>> + uintptr_t va, end_va;
> >>>>>>>>>>>> + uintptr_t __maybe_unused pa;
> >>>>>>>>>>>> uintptr_t load_pa = (uintptr_t)(&_start);
> >>>>>>>>>>>> uintptr_t load_sz = (uintptr_t)(&_end) - load_pa;
> >>>>>>>>>>>> uintptr_t map_size;
> >>>>>>>>>>>> @@ -382,6 +435,13 @@ asmlinkage void __init setup_vm(uintptr_t
> >>>>>>>>>>>> dtb_pa)
> >>>>>>>>>>>> pmd_t fix_bmap_spmd, fix_bmap_epmd;
> >>>>>>>>>>>> #endif
> >>>>>>>>>>>>
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> + uintptr_t xiprom = (uintptr_t)CONFIG_XIP_PHYS_ADDR;
> >>>>>>>>>>>> + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) -
> >>>>>>>>>>>> (uintptr_t)(&_xiprom);
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + load_pa = (uintptr_t)CONFIG_PHYS_RAM_BASE;
> >>>>>>>>>>>> + load_sz = (uintptr_t)(&_end) - (uintptr_t)(&_sdata);
> >>>>>>>>>>>> +#endif
> >>>>>>>>>>>> va_pa_offset = PAGE_OFFSET - load_pa;
> >>>>>>>>>
> >>>>>>>>> I should have seen this before, I was too focused on having a XIP
> >>>>>>>>> kernel
> >>>>>>>>> boot. I already moved the kernel mapping in the vmalloc zone: the
> >>>>>>>>> virtual to physical translations need to be handled differently
> >>>>>>>>> now that
> >>>>>>>>> the kernel mapping does not lie into linear mapping anymore, we can't
> >>>>>>>>> use va_pa_offset defined above for both mappings.
> >>>>>>>>>
> >>>>>>>>> I was rebasing my patchset on the XIP patch but I believe that
> >>>>>>>>> doing the
> >>>>>>>>> other way around would greatly simplify the XIP patch as the kernel
> >>>>>>>>> mapping would already be moved outside the linear mapping, there
> >>>>>>>>> would
> >>>>>>>>> be no need to reserve a zone in vmalloc anymore (that simplifies
> >>>>>>>>> pgtable.h quite a lot). And the XIP kernel mapping could be
> >>>>>>>>> implemented
> >>>>>>>>> in a new create_kernel_page_table (that would also simplify
> >>>>>>>>> mm/init.c).
> >>>>>>>>>
> >>>>>>>>> I can help to do that but I don't think we should merge this patch
> >>>>>>>>> as is
> >>>>>>>>> now.
> >>>>>>>>
> >>>>>>>> I think that's the right way to go for now: it's a lot harder to test
> >>>>>>>> the XIP stuff, as it requires a bunch of harness changes. So let's
> >>>>>>>> take the page table refactoring in now and rebase this stuff on top of
> >>>>>>>> it. There's really no way to do both without making more work for
> >>>>>>>> someone, it's just a headache on timing.
> >>>>>>>>
> >>>>>>>> Alex: if you want to sign up to spend some time there that'd be great,
> >>>>>>>> otherwise I will.
> >>>>>>>
> >>>>>>> I can take care of that, no problem.
> >>>>>>
> >>>>>> Vitaly, can you try the branch int/alex/riscv_xip_kernel_rebase_v1 at
> >>>>>> https://github.com/AlexGhiti/riscv-linux ? This boots fine using my
> >>>>>> setup.
> >>>>>>
> >>>>>> I removed most of the pgtable.h stuff, the XIP kernel is now mapped like
> >>>>>> any other kernel at the end of the address space, not in the vmalloc
> >>>>>> zone as you proposed. And I fixed a few thigns along the way (pfn_base,
> >>>>>> pfn_valid, copy_data and other stuff).
> >>>>>>
> >>>>>> Any comment is welcome !
> >>>>>
> >>>>> thanks for your efforts!
> >>>>>
> >>>>> I've just built your version. The build went well, but the image
> >>>>> doesn't seem to boot for me.
> >>>>
> >>>> Too bad. Can you give me your config please ?
> >>>>
> >>>
> >>> Apparently, as you can see below, your config works for me, at least it
> >>> reaches userspace. Do you have traces or more info about what is wrong ?
> >>
> >> Console output is just the same but it stops after the following line:
> >> [ 0.003208] Console: colour dummy device 80x25
> >>
> >> I did some very simplistic debugging bisecting start_kernel()
> >> execution and I could see that setup_per_cpu_pageset() was reached
> >> while calibrate_delay() was not.
> >>
> >> How (and whether) this might be related to XIP I don't know :)
> >
> > A short update: the system would hang in sched_clock_init() if run
> > with 'go 21000000' command.
>
> The output I pasted came from a boot using 'go', I can't make 'booti'
> work in my setup.
>
> And you don't have this issue with your patch right ?
I don't have it with yours as well. :) However, there's a small change
in u-boot's arch/riscv/lib/image.c that I forgot about (but sent it
today, and you're on CC).
Basically u-boot needs to honor force_reloc flag and not *force* the
relocation when this flag is not set.
> Can you give me any config that could allow me to reproduce this
> (uboot/buildroot) ? And your qemu version ?
Other than the small change mentioned above, u-boot and qemu are
basically the latest git.
All in all, I am quite sure now that your take on XIP is working fine.
The issue with single-core boot under QEmu seems to be less
reproducible on slower machines running QEmu and more reproducible on
higher performance ones. It's not clear to me if that is a QEmu
problem or an in-kernel race, but it's hardly a XIP problem: I was
able to reproduce it once on a non-XIP kernel too, by copying it to
RAM in u-boot and giving it a 'go'.
> Thanks,
>
> > If I use 'booti' command it passes and goes further all the way to
> > mounting the userspace
> >
> > So the problem is rather SMP related than XIP related.
>
>
>
> >
> > Best regards,
> > Vitaly
> >
> >>> Thanks!
> >>>
> >>> [ 0.000000] Linux version 5.12.0-rc2 (alex at debian)
> >>> (riscv64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.11.2) 9.3.0,
> >>> GNU ld (GNU Binutils) 2.34) #322 SMP Sat Apr 3 05:50:18 EDT 2021
> >>> [ 0.000000] Machine model: Microchip PolarFire-SoC Icicle Kit
> >>> [ 0.000000] earlycon: sbi0 at I/O port 0x0 (options '')
> >>> [ 0.000000] printk: bootconsole [sbi0] enabled
> >>> [ 0.000000] Zone ranges:
> >>> [ 0.000000] DMA32 [mem 0x0000000080000000-0x00000000bfffffff]
> >>> [ 0.000000] Normal empty
> >>> [ 0.000000] Movable zone start for each node
> >>> [ 0.000000] Early memory node ranges
> >>> [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000bfffffff]
> >>> [ 0.000000] Initmem setup node 0 [mem
> >>> 0x0000000080000000-0x00000000bfffffff]
> >>> [ 0.000000] On node 0 totalpages: 262144
> >>> [ 0.000000] DMA32 zone: 3584 pages used for memmap
> >>> [ 0.000000] DMA32 zone: 0 pages reserved
> >>> [ 0.000000] DMA32 zone: 262144 pages, LIFO batch:63
> >>> [ 0.000000] SBI specification v0.2 detected
> >>> [ 0.000000] SBI implementation ID=0x1 Version=0x6
> >>> [ 0.000000] SBI v0.2 TIME extension detected
> >>> [ 0.000000] SBI v0.2 IPI extension detected
> >>> [ 0.000000] SBI v0.2 RFENCE extension detected
> >>> [ 0.000000] software IO TLB: mapped [mem
> >>> 0x00000000b9e00000-0x00000000bde00000] (64MB)
> >>> [ 0.000000] CPU with hartid=0 is not available
> >>> [ 0.000000] CPU with hartid=0 is not available
> >>> [ 0.000000] riscv: ISA extensions acdfim
> >>> [ 0.000000] riscv: ELF capabilities acdfim
> >>> [ 0.000000] percpu: Embedded 17 pages/cpu s29856 r8192 d31584 u69632
> >>> [ 0.000000] pcpu-alloc: s29856 r8192 d31584 u69632 alloc=17*4096
> >>> [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
> >>> [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258560
> >>> [ 0.000000] Kernel command line: earlyprintk debug earlycon=sbi
> >>> console=ttyS0,115200n8 root=/dev/ram0 init=/sbin/init
> >>> [ 0.000000] Dentry cache hash table entries: 131072 (order: 8,
> >>> 1048576 bytes, linear)
> >>> [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288
> >>> bytes, linear)
> >>> [ 0.000000] Sorting __ex_table...
> >>> [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
> >>> [ 0.000000] Memory: 947732K/1048576K available (2999K kernel code,
> >>> 692K rwdata, 953K rodata, 205K init, 247K bss, 100844K reserved, 0K
> >>> cma-reserved)
> >>> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> >>> [ 0.000000] rcu: Hierarchical RCU implementation.
> >>> [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
> >>> [ 0.000000] rcu: RCU debug extended QS entry/exit.
> >>> [ 0.000000] Tracing variant of Tasks RCU enabled.
> >>> [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay
> >>> is 25 jiffies.
> >>> [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
> >>> [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
> >>> [ 0.000000] CPU with hartid=0 is not available
> >>> [ 0.000000] riscv-intc: unable to find hart id for
> >>> /cpus/cpu at 0/interrupt-controller
> >>> [ 0.000000] riscv-intc: 64 local interrupts mapped
> >>> [ 0.000000] plic: interrupt-controller at c000000: mapped 186 interrupts
> >>> with 4 handlers for 9 contexts.
> >>> [ 0.000000] random: get_random_bytes called from
> >>> start_kernel+0x2fe/0x49c with crng_init=0
> >>> [ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0]
> >>> hartid [1]
> >>> [ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff
> >>> max_cycles: 0x1d854df40, max_idle_ns: 3526361616960 ns
> >>> [ 0.000146] sched_clock: 64 bits at 1000kHz, resolution 1000ns, wraps
> >>> every 2199023255500ns
> >>> [ 0.006056] Console: colour dummy device 80x25
> >>> [ 0.015242] Calibrating delay loop (skipped), value calculated using
> >>> timer frequency.. 2.00 BogoMIPS (lpj=4000)
> >>> [ 0.017130] pid_max: default: 32768 minimum: 301
> >>> [ 0.020115] Mount-cache hash table entries: 2048 (order: 2, 16384
> >>> bytes, linear)
> >>> [ 0.021097] Mountpoint-cache hash table entries: 2048 (order: 2,
> >>> 16384 bytes, linear)
> >>> [ 0.078755] ASID allocator using 16 bits (65536 entries)
> >>> [ 0.083669] rcu: Hierarchical SRCU implementation.
> >>> [ 0.093304] smp: Bringing up secondary CPUs ...
> >>> [ 1.149900] CPU1: failed to come online
> >>> [ 2.204183] CPU2: failed to come online
> >>> [ 3.256211] CPU3: failed to come online
> >>> [ 3.257043] smp: Brought up 1 node, 1 CPU
> >>> [ 3.269554] devtmpfs: initialized
> >>> [ 3.282015] clocksource: jiffies: mask: 0xffffffff max_cycles:
> >>> 0xffffffff, max_idle_ns: 7645041785100000 ns
> >>> [ 3.283484] futex hash table entries: 1024 (order: 4, 65536 bytes,
> >>> linear)
> >>> [ 3.381718] SCSI subsystem initialized
> >>> [ 3.385115] clocksource: Switched to clocksource riscv_clocksource
> >>> [ 3.602198] workingset: timestamp_bits=62 max_order=18 bucket_order=0
> >>> [ 3.624182] Block layer SCSI generic (bsg) driver version 0.4 loaded
> >>> (major 253)
> >>> [ 3.625988] io scheduler mq-deadline registered
> >>> [ 3.626725] io scheduler kyber registered
> >>> [ 3.629047] start plist test
> >>> [ 3.641420] end plist test
> >>> [ 3.717639] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> >>> [ 3.752315] brd: module loaded
> >>> [ 3.790207] loop: module loaded
> >>> [ 3.793943] mousedev: PS/2 mouse device common for all mice
> >>> [ 3.810511] Warning: unable to open an initial console.
> >>> [ 3.811923] Freeing unused kernel memory: 88K
> >>> [ 3.812558] This architecture does not have kernel memory protection.
> >>> [ 3.814280] Run /init as init process
> >>> [ 3.814808] with arguments:
> >>> [ 3.815227] /init
> >>> [ 3.815539] with environment:
> >>> [ 3.815924] HOME=/
> >>> [ 3.816250] TERM=linux
> >>> [ 4.398678] random: dd: uninitialized urandom read (512 bytes read)
> >>>
> >>>
> >>>> Thanks,
> >>>>
> >>>> Alex
> >>>>
> >>>>> I'll take a look at the code later today.
> >>>>>
> >>>>> Best regards,
> >>>>> Vitaly
> >>>>>
> >>>>>> Thanks,
> >>>>>>
> >>>>>> Alex
> >>>>>>
> >>>>>>>
> >>>>>>>> Either way, can you point me (either just indicate the old version is
> >>>>>>>> OK or send a new one) to what you want me to look at WRT the page
> >>>>>>>> table code? IIRC it looked pretty much fine, but I'll take another
> >>>>>>>> look ASAP so we can avoid serializing everything.
> >>>>>>>
> >>>>>>> The v3 is fine for me:
> >>>>>>> https://patchwork.kernel.org/project/linux-riscv/list/?series=447699
> >>>>>>>
> >>>>>>>>
> >>>>>>>>>
> >>>>>>>>> Alex
> >>>>>>>>>
> >>>>>>>>>>>> pfn_base = PFN_DOWN(load_pa);
> >>>>>>>>>>>>
> >>>>>>>>>>>> @@ -420,6 +480,21 @@ asmlinkage void __init setup_vm(uintptr_t
> >>>>>>>>>>>> dtb_pa)
> >>>>>>>>>>>> load_pa, PGDIR_SIZE, PAGE_KERNEL_EXEC);
> >>>>>>>>>>>> #endif
> >>>>>>>>>>>>
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> + create_pgd_mapping(trampoline_pg_dir, XIP_VIRT_ADDR_START,
> >>>>>>>>>>>> + (uintptr_t)xip_pmd, PGDIR_SIZE,
> >>>>>>>>>>>> PAGE_TABLE);
> >>>>>>>>>>>> + for (va = XIP_VIRT_ADDR_START;
> >>>>>>>>>>>> + va < XIP_VIRT_ADDR_START + xiprom_sz;
> >>>>>>>>>>>> + va += PMD_SIZE) {
> >>>>>>>>>>>> + create_pmd_mapping(xip_pmd, va,
> >>>>>>>>>>>> + xiprom + (va -
> >>>>>>>>>>>> XIP_VIRT_ADDR_START),
> >>>>>>>>>>>> + PMD_SIZE, PAGE_KERNEL_EXEC);
> >>>>>>>>>>>> + }
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + create_pgd_mapping(early_pg_dir, XIP_VIRT_ADDR_START,
> >>>>>>>>>>>> + (uintptr_t)xip_pmd, PGDIR_SIZE,
> >>>>>>>>>>>> PAGE_TABLE);
> >>>>>>>>>>>> +#endif
> >>>>>>>>>>>> +
> >>>>>>>>>>>> /*
> >>>>>>>>>>>> * Setup early PGD covering entire kernel which will
> >>>>>>>>>>>> allows
> >>>>>>>>>>>> * us to reach paging_init(). We map all memory banks
> >>>>>>>>>>>> later
> >>>>>>>>>>>> @@ -444,7 +519,7 @@ asmlinkage void __init setup_vm(uintptr_t
> >>>>>>>>>>>> dtb_pa)
> >>>>>>>>>>>> pa + PMD_SIZE, PMD_SIZE, PAGE_KERNEL);
> >>>>>>>>>>>> dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa &
> >>>>>>>>>>>> (PMD_SIZE - 1));
> >>>>>>>>>>>> #else /* CONFIG_BUILTIN_DTB */
> >>>>>>>>>>>> - dtb_early_va = __va(dtb_pa);
> >>>>>>>>>>>> + dtb_early_va = __va(XIP_FIXUP(dtb_pa));
> >>>>>>>>>>>> #endif /* CONFIG_BUILTIN_DTB */
> >>>>>>>>>>>> #else
> >>>>>>>>>>>> #ifndef CONFIG_BUILTIN_DTB
> >>>>>>>>>>>> @@ -456,7 +531,7 @@ asmlinkage void __init setup_vm(uintptr_t
> >>>>>>>>>>>> dtb_pa)
> >>>>>>>>>>>> pa + PGDIR_SIZE, PGDIR_SIZE,
> >>>>>>>>>>>> PAGE_KERNEL);
> >>>>>>>>>>>> dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa &
> >>>>>>>>>>>> (PGDIR_SIZE - 1));
> >>>>>>>>>>>> #else /* CONFIG_BUILTIN_DTB */
> >>>>>>>>>>>> - dtb_early_va = __va(dtb_pa);
> >>>>>>>>>>>> + dtb_early_va = __va(XIP_FIXUP(dtb_pa));
> >>>>>>>>>>>> #endif /* CONFIG_BUILTIN_DTB */
> >>>>>>>>>>>> #endif
> >>>>>>>>>>>> dtb_early_pa = dtb_pa;
> >>>>>>>>>>>> @@ -497,6 +572,9 @@ static void __init setup_vm_final(void)
> >>>>>>>>>>>> uintptr_t va, map_size;
> >>>>>>>>>>>> phys_addr_t pa, start, end;
> >>>>>>>>>>>> u64 i;
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) -
> >>>>>>>>>>>> (uintptr_t)(&_xiprom);
> >>>>>>>>>>>> +#endif
> >>>>>>>>>>>>
> >>>>>>>>>>>> /**
> >>>>>>>>>>>> * MMU is enabled at this point. But page table setup is
> >>>>>>>>>>>> not complete yet.
> >>>>>>>>>>>> @@ -528,6 +606,16 @@ static void __init setup_vm_final(void)
> >>>>>>>>>>>> map_size,
> >>>>>>>>>>>> PAGE_KERNEL_EXEC);
> >>>>>>>>>>>> }
> >>>>>>>>>>>> }
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> + map_size = best_map_size(CONFIG_XIP_PHYS_ADDR, xiprom_sz);
> >>>>>>>>>>>> + for (va = XIP_VIRT_ADDR_START;
> >>>>>>>>>>>> + va < XIP_VIRT_ADDR_START + xiprom_sz;
> >>>>>>>>>>>> + va += map_size)
> >>>>>>>>>>>> + create_pgd_mapping(swapper_pg_dir, va,
> >>>>>>>>>>>> + CONFIG_XIP_PHYS_ADDR + (va -
> >>>>>>>>>>>> XIP_VIRT_ADDR_START),
> >>>>>>>>>>>> + map_size, PAGE_KERNEL_EXEC);
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#endif
> >>>>>>>>>>>>
> >>>>>>>>>>>> /* Clear fixmap PTE and PMD mappings */
> >>>>>>>>>>>> clear_fixmap(FIX_PTE);
> >>>>>>>>>>
> >>>>>>>>>> _______________________________________________
> >>>>>>>>>> linux-riscv mailing list
> >>>>>>>>>> linux-riscv at lists.infradead.org
> >>>>>>>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
> >>>>>>>>>>
> >>>>>>>>
> >>>>>>>> _______________________________________________
> >>>>>>>> linux-riscv mailing list
> >>>>>>>> linux-riscv at lists.infradead.org
> >>>>>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
> >>>>>>>
> >>>>>>> _______________________________________________
> >>>>>>> linux-riscv mailing list
> >>>>>>> linux-riscv at lists.infradead.org
> >>>>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
> >>>>>
> >>>>> _______________________________________________
> >>>>> linux-riscv mailing list
> >>>>> linux-riscv at lists.infradead.org
> >>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
> >>>>>
> >
> > _______________________________________________
> > linux-riscv mailing list
> > linux-riscv at lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-riscv
> >
More information about the linux-riscv
mailing list