[PATCH v6] RISC-V: enable XIP
Vitaly Wool
vitaly.wool at konsulko.com
Thu Apr 1 09:52:43 BST 2021
Hi Alex,
On Thu, Apr 1, 2021 at 10:11 AM Alex Ghiti <alex at ghiti.fr> wrote:
>
> Hi,
>
> Le 3/30/21 à 4:04 PM, Alex Ghiti a écrit :
> > Le 3/30/21 à 3:33 PM, Palmer Dabbelt a écrit :
> >> On Tue, 30 Mar 2021 11:39:10 PDT (-0700), alex at ghiti.fr wrote:
> >>>
> >>>
> >>> Le 3/30/21 à 2:26 AM, Vitaly Wool a écrit :
> >>>> On Tue, Mar 30, 2021 at 8:23 AM Palmer Dabbelt
> >>>> <palmerdabbelt at google.com> wrote:
> >>>>>
> >>>>> On Sun, 21 Mar 2021 17:12:15 PDT (-0700), vitaly.wool at konsulko.com
> >>>>> wrote:
> >>>>>> Introduce XIP (eXecute In Place) support for RISC-V platforms.
> >>>>>> It allows code to be executed directly from non-volatile storage
> >>>>>> directly addressable by the CPU, such as QSPI NOR flash which can
> >>>>>> be found on many RISC-V platforms. This makes way for significant
> >>>>>> optimization of RAM footprint. The XIP kernel is not compressed
> >>>>>> since it has to run directly from flash, so it will occupy more
> >>>>>> space on the non-volatile storage. The physical flash address used
> >>>>>> to link the kernel object files and for storing it has to be known
> >>>>>> at compile time and is represented by a Kconfig option.
> >>>>>>
> >>>>>> XIP on RISC-V will for the time being only work on MMU-enabled
> >>>>>> kernels.
> >>>>>>
> >>>>>> Signed-off-by: Vitaly Wool <vitaly.wool at konsulko.com>
> >>>>>>
> >>>>>> ---
> >>>>>>
> >>>>>> Changes in v2:
> >>>>>> - dedicated macro for XIP address fixup when MMU is not enabled yet
> >>>>>> o both for 32-bit and 64-bit RISC-V
> >>>>>> - SP is explicitly set to a safe place in RAM before __copy_data call
> >>>>>> - removed redundant alignment requirements in vmlinux-xip.lds.S
> >>>>>> - changed long -> uintptr_t typecast in __XIP_FIXUP macro.
> >>>>>> Changes in v3:
> >>>>>> - rebased against latest for-next
> >>>>>> - XIP address fixup macro now takes an argument
> >>>>>> - SMP related fixes
> >>>>>> Changes in v4:
> >>>>>> - rebased against the current for-next
> >>>>>> - less #ifdef's in C/ASM code
> >>>>>> - dedicated XIP_FIXUP_OFFSET assembler macro in head.S
> >>>>>> - C-specific definitions moved into #ifndef __ASSEMBLY__
> >>>>>> - Fixed multi-core boot
> >>>>>> Changes in v5:
> >>>>>> - fixed build error for non-XIP kernels
> >>>>>> Changes in v6:
> >>>>>> - XIP_PHYS_RAM_BASE config option renamed to PHYS_RAM_BASE
> >>>>>> - added PHYS_RAM_BASE_FIXED config flag to allow usage of
> >>>>>> PHYS_RAM_BASE in non-XIP configurations if needed
> >>>>>> - XIP_FIXUP macro rewritten with a tempoarary variable to avoid side
> >>>>>> effects
> >>>>>> - fixed crash for non-XIP kernels that don't use built-in DTB
> >>>>>
> >>>>> So v5 landed on for-next, which generally means it's best to avoid
> >>>>> re-spinning the patch and instead send along fixups. That said,
> >>>>> the v5
> >>>>> is causing some testing failures for me.
> >>>>>
> >>>>> I'm going to drop the v5 for now as I don't have time to test this
> >>>>> tonight. I'll try and take a look soon, as it will conflict with
> >>>>> Alex's
> >>>>> patches.
> >>>>
> >>>> I can come up with the incremental patch instead pretty much straight
> >>>> away if that works better.
> >>>>
> >>>> ~Vitaly
> >>>>
> >>>>>> arch/riscv/Kconfig | 49 ++++++++++-
> >>>>>> arch/riscv/Makefile | 8 +-
> >>>>>> arch/riscv/boot/Makefile | 13 +++
> >>>>>> arch/riscv/include/asm/pgtable.h | 65 ++++++++++++--
> >>>>>> arch/riscv/kernel/cpu_ops_sbi.c | 11 ++-
> >>>>>> arch/riscv/kernel/head.S | 49 ++++++++++-
> >>>>>> arch/riscv/kernel/head.h | 3 +
> >>>>>> arch/riscv/kernel/setup.c | 8 +-
> >>>>>> arch/riscv/kernel/vmlinux-xip.lds.S | 132
> >>>>>> ++++++++++++++++++++++++++++
> >>>>>> arch/riscv/kernel/vmlinux.lds.S | 6 ++
> >>>>>> arch/riscv/mm/init.c | 100 +++++++++++++++++++--
> >>>>>> 11 files changed, 426 insertions(+), 18 deletions(-)
> >>>>>> create mode 100644 arch/riscv/kernel/vmlinux-xip.lds.S
> >>>>>>
> >>>>>> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> >>>>>> index 8ea60a0a19ae..bd6f82240c34 100644
> >>>>>> --- a/arch/riscv/Kconfig
> >>>>>> +++ b/arch/riscv/Kconfig
> >>>>>> @@ -441,7 +441,7 @@ config EFI_STUB
> >>>>>>
> >>>>>> config EFI
> >>>>>> bool "UEFI runtime support"
> >>>>>> - depends on OF
> >>>>>> + depends on OF && !XIP_KERNEL
> >>>>>> select LIBFDT
> >>>>>> select UCS2_STRING
> >>>>>> select EFI_PARAMS_FROM_FDT
> >>>>>> @@ -465,11 +465,56 @@ config STACKPROTECTOR_PER_TASK
> >>>>>> def_bool y
> >>>>>> depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_TLS
> >>>>>>
> >>>>>> +config PHYS_RAM_BASE_FIXED
> >>>>>> + bool "Explicitly specified physical RAM address"
> >>>>>> + default n
> >>>>>> +
> >>>>>> +config PHYS_RAM_BASE
> >>>>>> + hex "Platform Physical RAM address"
> >>>>>> + depends on PHYS_RAM_BASE_FIXED
> >>>>>> + default "0x80000000"
> >>>>>> + help
> >>>>>> + This is the physical address of RAM in the system. It has
> >>>>>> to be
> >>>>>> + explicitly specified to run early relocations of
> >>>>>> read-write data
> >>>>>> + from flash to RAM.
> >>>>>> +
> >>>>>> +config XIP_KERNEL
> >>>>>> + bool "Kernel Execute-In-Place from ROM"
> >>>>>> + depends on MMU
> >>>>>> + select PHYS_RAM_BASE_FIXED
> >>>>>> + help
> >>>>>> + Execute-In-Place allows the kernel to run from
> >>>>>> non-volatile storage
> >>>>>> + directly addressable by the CPU, such as NOR flash. This
> >>>>>> saves RAM
> >>>>>> + space since the text section of the kernel is not loaded
> >>>>>> from flash
> >>>>>> + to RAM. Read-write sections, such as the data section and
> >>>>>> stack,
> >>>>>> + are still copied to RAM. The XIP kernel is not compressed
> >>>>>> since
> >>>>>> + it has to run directly from flash, so it will take more
> >>>>>> space to
> >>>>>> + store it. The flash address used to link the kernel
> >>>>>> object files,
> >>>>>> + and for storing it, is configuration dependent. Therefore,
> >>>>>> if you
> >>>>>> + say Y here, you must know the proper physical address
> >>>>>> where to
> >>>>>> + store the kernel image depending on your own flash memory
> >>>>>> usage.
> >>>>>> +
> >>>>>> + Also note that the make target becomes "make xipImage"
> >>>>>> rather than
> >>>>>> + "make zImage" or "make Image". The final kernel binary to
> >>>>>> put in
> >>>>>> + ROM memory will be arch/riscv/boot/xipImage.
> >>>>>> +
> >>>>>> + If unsure, say N.
> >>>>>> +
> >>>>>> +config XIP_PHYS_ADDR
> >>>>>> + hex "XIP Kernel Physical Location"
> >>>>>> + depends on XIP_KERNEL
> >>>>>> + default "0x21000000"
> >>>>>> + help
> >>>>>> + This is the physical address in your flash memory the
> >>>>>> kernel will
> >>>>>> + be linked for and stored to. This address is dependent on
> >>>>>> your
> >>>>>> + own flash usage.
> >>>>>> +
> >>>>>> endmenu
> >>>>>>
> >>>>>> config BUILTIN_DTB
> >>>>>> - def_bool n
> >>>>>> + bool
> >>>>>> depends on OF
> >>>>>> + default y if XIP_KERNEL
> >>>>>>
> >>>>>> menu "Power management options"
> >>>>>>
> >>>>>> diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
> >>>>>> index 1368d943f1f3..8fcbec03974d 100644
> >>>>>> --- a/arch/riscv/Makefile
> >>>>>> +++ b/arch/riscv/Makefile
> >>>>>> @@ -82,7 +82,11 @@ CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
> >>>>>>
> >>>>>> # Default target when executing plain make
> >>>>>> boot := arch/riscv/boot
> >>>>>> +ifeq ($(CONFIG_XIP_KERNEL),y)
> >>>>>> +KBUILD_IMAGE := $(boot)/xipImage
> >>>>>> +else
> >>>>>> KBUILD_IMAGE := $(boot)/Image.gz
> >>>>>> +endif
> >>>>>>
> >>>>>> head-y := arch/riscv/kernel/head.o
> >>>>>>
> >>>>>> @@ -95,12 +99,14 @@ PHONY += vdso_install
> >>>>>> vdso_install:
> >>>>>> $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
> >>>>>>
> >>>>>> +ifneq ($(CONFIG_XIP_KERNEL),y)
> >>>>>> ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAAN),yy)
> >>>>>> KBUILD_IMAGE := $(boot)/loader.bin
> >>>>>> else
> >>>>>> KBUILD_IMAGE := $(boot)/Image.gz
> >>>>>> endif
> >>>>>> -BOOT_TARGETS := Image Image.gz loader loader.bin
> >>>>>> +endif
> >>>>>> +BOOT_TARGETS := Image Image.gz loader loader.bin xipImage
> >>>>>>
> >>>>>> all: $(notdir $(KBUILD_IMAGE))
> >>>>>>
> >>>>>> diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
> >>>>>> index 03404c84f971..6bf299f70c27 100644
> >>>>>> --- a/arch/riscv/boot/Makefile
> >>>>>> +++ b/arch/riscv/boot/Makefile
> >>>>>> @@ -17,8 +17,21 @@
> >>>>>> KCOV_INSTRUMENT := n
> >>>>>>
> >>>>>> OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R
> >>>>>> .comment -S
> >>>>>> +OBJCOPYFLAGS_xipImage :=-O binary -R .note -R .note.gnu.build-id
> >>>>>> -R .comment -S
> >>>>>>
> >>>>>> targets := Image Image.* loader loader.o loader.lds loader.bin
> >>>>>> +targets := Image Image.* loader loader.o loader.lds loader.bin
> >>>>>> xipImage
> >>>>>> +
> >>>>>> +ifeq ($(CONFIG_XIP_KERNEL),y)
> >>>>>> +
> >>>>>> +quiet_cmd_mkxip = $(quiet_cmd_objcopy)
> >>>>>> +cmd_mkxip = $(cmd_objcopy)
> >>>>>> +
> >>>>>> +$(obj)/xipImage: vmlinux FORCE
> >>>>>> + $(call if_changed,mkxip)
> >>>>>> + @$(kecho) ' Physical Address of xipImage:
> >>>>>> $(CONFIG_XIP_PHYS_ADDR)'
> >>>>>> +
> >>>>>> +endif
> >>>>>>
> >>>>>> $(obj)/Image: vmlinux FORCE
> >>>>>> $(call if_changed,objcopy)
> >>>>>> diff --git a/arch/riscv/include/asm/pgtable.h
> >>>>>> b/arch/riscv/include/asm/pgtable.h
> >>>>>> index ebf817c1bdf4..21a9b2f8d1c7 100644
> >>>>>> --- a/arch/riscv/include/asm/pgtable.h
> >>>>>> +++ b/arch/riscv/include/asm/pgtable.h
> >>>>>> @@ -11,6 +11,33 @@
> >>>>>>
> >>>>>> #include <asm/pgtable-bits.h>
> >>>>>>
> >>>>>> +#ifdef CONFIG_MMU
> >>>>>> +
> >>>>>> +#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> >>>>>> +
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> +#define VMALLOC_SIZE ((KERN_VIRT_SIZE >> 1) - SZ_16M)
> >>>>>> +#define VMALLOC_END (PAGE_OFFSET - SZ_16M - 1)
> >>>>>> +
> >>>>>> +#define XIP_OFFSET SZ_8M
> >>>>>> +#define XIP_MASK (SZ_8M - 1)
> >>>>>> +#define XIP_VIRT_ADDR(physaddr) \
> >>>>>> + (PAGE_OFFSET - XIP_OFFSET + ((physaddr) & XIP_MASK))
> >>>>>> +
> >>>>>> +#else
> >>>>>> +
> >>>>>> +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> >>>>>> +#define VMALLOC_END (PAGE_OFFSET - 1)
> >>>>>> +
> >>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>> +
> >>>>>> +#else
> >>>>>> +
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> +#define XIP_VIRT_ADDR(physaddr) (physaddr)
> >>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>> +#endif /* CONFIG_MMU */
> >>>>>> +
> >>>>>> #ifndef __ASSEMBLY__
> >>>>>>
> >>>>>> /* Page Upper Directory not used in RISC-V */
> >>>>>> @@ -21,9 +48,25 @@
> >>>>>>
> >>>>>> #ifdef CONFIG_MMU
> >>>>>>
> >>>>>> -#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> >>>>>> -#define VMALLOC_END (PAGE_OFFSET - 1)
> >>>>>> -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> +/*
> >>>>>> + * Since we use sections to map it, this macro replaces the
> >>>>>> physical address
> >>>>>> + * with its virtual address while keeping offset from the base
> >>>>>> section.
> >>>>>> + */
> >>>>>> +#define XIP_PHYS_ADDR(va) \
> >>>>>> + ((uintptr_t)(va) - PAGE_OFFSET + XIP_OFFSET +
> >>>>>> CONFIG_XIP_PHYS_ADDR)
> >>>>>> +
> >>>>>> +#define XIP_VIRT_ADDR_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> >>>>>> +
> >>>>>> +#define XIP_FIXUP(addr) ({ \
> >>>>>> + uintptr_t __a = (uintptr_t)(addr); \
> >>>>>> + (__a >= CONFIG_XIP_PHYS_ADDR && \
> >>>>>> + __a < CONFIG_XIP_PHYS_ADDR + SZ_16M) ? \
> >>>>>> + __a - CONFIG_XIP_PHYS_ADDR + CONFIG_PHYS_RAM_BASE -
> >>>>>> XIP_OFFSET : __a; \
> >>>>>> +})
> >>>>>> +#else
> >>>>>> +#define XIP_FIXUP(addr) (addr)
> >>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>>
> >>>>>> #define BPF_JIT_REGION_SIZE (SZ_128M)
> >>>>>> #define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
> >>>>>> @@ -484,8 +527,20 @@ static inline int
> >>>>>> ptep_clear_flush_young(struct vm_area_struct *vma,
> >>>>>>
> >>>>>> #define kern_addr_valid(addr) (1) /* FIXME */
> >>>>>>
> >>>>>> -extern void *dtb_early_va;
> >>>>>> -extern uintptr_t dtb_early_pa;
> >>>>>> +extern void *_dtb_early_va;
> >>>>>> +extern uintptr_t _dtb_early_pa;
> >>>>>> +#if defined(CONFIG_XIP_KERNEL) && defined(CONFIG_MMU)
> >>>>>> +
> >>>>>> +#define dtb_early_va (*(void **)XIP_FIXUP(&_dtb_early_va))
> >>>>>> +#define dtb_early_pa (*(uintptr_t *)XIP_FIXUP(&_dtb_early_pa))
> >>>>>> +
> >>>>>> +#else
> >>>>>> +
> >>>>>> +#define dtb_early_va _dtb_early_va
> >>>>>> +#define dtb_early_pa _dtb_early_pa
> >>>>>> +
> >>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>> +
> >>>>>> void setup_bootmem(void);
> >>>>>> void paging_init(void);
> >>>>>> void misc_mem_init(void);
> >>>>>> diff --git a/arch/riscv/kernel/cpu_ops_sbi.c
> >>>>>> b/arch/riscv/kernel/cpu_ops_sbi.c
> >>>>>> index 685fae72b7f5..2413c2997350 100644
> >>>>>> --- a/arch/riscv/kernel/cpu_ops_sbi.c
> >>>>>> +++ b/arch/riscv/kernel/cpu_ops_sbi.c
> >>>>>> @@ -53,10 +53,19 @@ static int sbi_hsm_hart_get_status(unsigned
> >>>>>> long hartid)
> >>>>>> }
> >>>>>> #endif
> >>>>>>
> >>>>>> +static inline unsigned long get_secondary_start_phys(void)
> >>>>>> +{
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> + return XIP_PHYS_ADDR(secondary_start_sbi);
> >>>>>> +#else
> >>>>>> + return __pa_symbol(secondary_start_sbi);
> >>>>>> +#endif
> >>>>>> +}
> >>>>>> +
> >>>>>> static int sbi_cpu_start(unsigned int cpuid, struct task_struct
> >>>>>> *tidle)
> >>>>>> {
> >>>>>> int rc;
> >>>>>> - unsigned long boot_addr = __pa_symbol(secondary_start_sbi);
> >>>>>> + unsigned long boot_addr = get_secondary_start_phys();
> >>>>>> int hartid = cpuid_to_hartid_map(cpuid);
> >>>>>>
> >>>>>> cpu_update_secondary_bootdata(cpuid, tidle);
> >>>>>> diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
> >>>>>> index f5a9bad86e58..bbe74e37914f 100644
> >>>>>> --- a/arch/riscv/kernel/head.S
> >>>>>> +++ b/arch/riscv/kernel/head.S
> >>>>>> @@ -9,11 +9,23 @@
> >>>>>> #include <linux/linkage.h>
> >>>>>> #include <asm/thread_info.h>
> >>>>>> #include <asm/page.h>
> >>>>>> +#include <asm/pgtable.h>
> >>>>>> #include <asm/csr.h>
> >>>>>> #include <asm/hwcap.h>
> >>>>>> #include <asm/image.h>
> >>>>>> #include "efi-header.S"
> >>>>>>
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> +.macro XIP_FIXUP_OFFSET reg
> >>>>>> + REG_L t0, _xip_fixup
> >>>>>> + add \reg, \reg, t0
> >>>>>> +.endm
> >>>>>> +_xip_fixup: .dword CONFIG_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR -
> >>>>>> XIP_OFFSET
> >>>>>> +#else
> >>>>>> +.macro XIP_FIXUP_OFFSET reg
> >>>>>> +.endm
> >>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>> +
> >>>>>> __HEAD
> >>>>>> ENTRY(_start)
> >>>>>> /*
> >>>>>> @@ -69,7 +81,11 @@ pe_head_start:
> >>>>>> #ifdef CONFIG_MMU
> >>>>>> relocate:
> >>>>>> /* Relocate return address */
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> + li a1, XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> >>>>>> +#else
> >>>>>> li a1, PAGE_OFFSET
> >>>>>> +#endif
> >>>>>> la a2, _start
> >>>>>> sub a1, a1, a2
> >>>>>> add ra, ra, a1
> >>>>>> @@ -91,6 +107,7 @@ relocate:
> >>>>>> * to ensure the new translations are in use.
> >>>>>> */
> >>>>>> la a0, trampoline_pg_dir
> >>>>>> + XIP_FIXUP_OFFSET a0
> >>>>>> srl a0, a0, PAGE_SHIFT
> >>>>>> or a0, a0, a1
> >>>>>> sfence.vma
> >>>>>> @@ -144,7 +161,9 @@ secondary_start_sbi:
> >>>>>>
> >>>>>> slli a3, a0, LGREG
> >>>>>> la a4, __cpu_up_stack_pointer
> >>>>>> + XIP_FIXUP_OFFSET a4
> >>>>>> la a5, __cpu_up_task_pointer
> >>>>>> + XIP_FIXUP_OFFSET a5
> >>>>>> add a4, a3, a4
> >>>>>> add a5, a3, a5
> >>>>>> REG_L sp, (a4)
> >>>>>> @@ -156,6 +175,7 @@ secondary_start_common:
> >>>>>> #ifdef CONFIG_MMU
> >>>>>> /* Enable virtual memory and relocate to virtual address */
> >>>>>> la a0, swapper_pg_dir
> >>>>>> + XIP_FIXUP_OFFSET a0
> >>>>>> call relocate
> >>>>>> #endif
> >>>>>> call setup_trap_vector
> >>>>>> @@ -236,12 +256,33 @@ pmp_done:
> >>>>>> .Lgood_cores:
> >>>>>> #endif
> >>>>>>
> >>>>>> +#ifndef CONFIG_XIP_KERNEL
> >>>>>> /* Pick one hart to run the main boot sequence */
> >>>>>> la a3, hart_lottery
> >>>>>> li a2, 1
> >>>>>> amoadd.w a3, a2, (a3)
> >>>>>> bnez a3, .Lsecondary_start
> >>>>>>
> >>>>>> +#else
> >>>>>> + /* hart_lottery in flash contains a magic number */
> >>>>>> + la a3, hart_lottery
> >>>>>> + mv a2, a3
> >>>>>> + XIP_FIXUP_OFFSET a2
> >>>>>> + lw t1, (a3)
> >>>>>> + amoswap.w t0, t1, (a2)
> >>>>>> + /* first time here if hart_lottery in RAM is not set */
> >>>>>> + beq t0, t1, .Lsecondary_start
> >>>>>> +
> >>>>>> + la sp, _end + THREAD_SIZE
> >>>>>> + XIP_FIXUP_OFFSET sp
> >>>>>> + mv s0, a0
> >>>>>> + call __copy_data
> >>>>>> +
> >>>>>> + /* Restore a0 copy */
> >>>>>> + mv a0, s0
> >>>>>> +#endif
> >>>>>> +
> >>>>>> +#ifndef CONFIG_XIP_KERNEL
> >>>>>> /* Clear BSS for flat non-ELF images */
> >>>>>> la a3, __bss_start
> >>>>>> la a4, __bss_stop
> >>>>>> @@ -251,15 +292,18 @@ clear_bss:
> >>>>>> add a3, a3, RISCV_SZPTR
> >>>>>> blt a3, a4, clear_bss
> >>>>>> clear_bss_done:
> >>>>>> -
> >>>>>> +#endif
> >>>>>> /* Save hart ID and DTB physical address */
> >>>>>> mv s0, a0
> >>>>>> mv s1, a1
> >>>>>> +
> >>>>>> la a2, boot_cpu_hartid
> >>>>>> + XIP_FIXUP_OFFSET a2
> >>>>>> REG_S a0, (a2)
> >>>>>>
> >>>>>> /* Initialize page tables and relocate to virtual addresses */
> >>>>>> la sp, init_thread_union + THREAD_SIZE
> >>>>>> + XIP_FIXUP_OFFSET sp
> >>>>>> #ifdef CONFIG_BUILTIN_DTB
> >>>>>> la a0, __dtb_start
> >>>>>> #else
> >>>>>> @@ -268,6 +312,7 @@ clear_bss_done:
> >>>>>> call setup_vm
> >>>>>> #ifdef CONFIG_MMU
> >>>>>> la a0, early_pg_dir
> >>>>>> + XIP_FIXUP_OFFSET a0
> >>>>>> call relocate
> >>>>>> #endif /* CONFIG_MMU */
> >>>>>>
> >>>>>> @@ -292,7 +337,9 @@ clear_bss_done:
> >>>>>>
> >>>>>> slli a3, a0, LGREG
> >>>>>> la a1, __cpu_up_stack_pointer
> >>>>>> + XIP_FIXUP_OFFSET a1
> >>>>>> la a2, __cpu_up_task_pointer
> >>>>>> + XIP_FIXUP_OFFSET a2
> >>>>>> add a1, a3, a1
> >>>>>> add a2, a3, a2
> >>>>>>
> >>>>>> diff --git a/arch/riscv/kernel/head.h b/arch/riscv/kernel/head.h
> >>>>>> index b48dda3d04f6..aabbc3ac3e48 100644
> >>>>>> --- a/arch/riscv/kernel/head.h
> >>>>>> +++ b/arch/riscv/kernel/head.h
> >>>>>> @@ -12,6 +12,9 @@ extern atomic_t hart_lottery;
> >>>>>>
> >>>>>> asmlinkage void do_page_fault(struct pt_regs *regs);
> >>>>>> asmlinkage void __init setup_vm(uintptr_t dtb_pa);
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> +asmlinkage void __init __copy_data(void);
> >>>>>> +#endif
> >>>>>>
> >>>>>> extern void *__cpu_up_stack_pointer[];
> >>>>>> extern void *__cpu_up_task_pointer[];
> >>>>>> diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
> >>>>>> index e85bacff1b50..a0384c72c272 100644
> >>>>>> --- a/arch/riscv/kernel/setup.c
> >>>>>> +++ b/arch/riscv/kernel/setup.c
> >>>>>> @@ -50,7 +50,11 @@ struct screen_info screen_info
> >>>>>> __section(".data") = {
> >>>>>> * This is used before the kernel initializes the BSS so it
> >>>>>> can't be in the
> >>>>>> * BSS.
> >>>>>> */
> >>>>>> -atomic_t hart_lottery __section(".sdata");
> >>>>>> +atomic_t hart_lottery __section(".sdata")
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> += ATOMIC_INIT(0xC001BEEF)
> >>>>>> +#endif
> >>>>>> +;
> >>>>>> unsigned long boot_cpu_hartid;
> >>>>>> static DEFINE_PER_CPU(struct cpu, cpu_devices);
> >>>>>>
> >>>>>> @@ -254,7 +258,7 @@ void __init setup_arch(char **cmdline_p)
> >>>>>> #if IS_ENABLED(CONFIG_BUILTIN_DTB)
> >>>>>> unflatten_and_copy_device_tree();
> >>>>>> #else
> >>>>>> - if (early_init_dt_verify(__va(dtb_early_pa)))
> >>>>>> + if (early_init_dt_verify(__va(XIP_FIXUP(dtb_early_pa))))
> >>>>>> unflatten_device_tree();
> >>>>>> else
> >>>>>> pr_err("No DTB found in kernel mappings\n");
> >>>>>> diff --git a/arch/riscv/kernel/vmlinux-xip.lds.S
> >>>>>> b/arch/riscv/kernel/vmlinux-xip.lds.S
> >>>>>> new file mode 100644
> >>>>>> index 000000000000..9f0f08c34cd3
> >>>>>> --- /dev/null
> >>>>>> +++ b/arch/riscv/kernel/vmlinux-xip.lds.S
> >>>>>> @@ -0,0 +1,132 @@
> >>>>>> +/* SPDX-License-Identifier: GPL-2.0-only */
> >>>>>> +/*
> >>>>>> + * Copyright (C) 2012 Regents of the University of California
> >>>>>> + * Copyright (C) 2017 SiFive
> >>>>>> + * Copyright (C) 2020 Vitaly Wool, Konsulko AB
> >>>>>> + */
> >>>>>> +
> >>>>>> +#define LOAD_OFFSET XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> >>>>>> +/* No __ro_after_init data in the .rodata section - which will
> >>>>>> always be ro */
> >>>>>> +#define RO_AFTER_INIT_DATA
> >>>>>> +
> >>>>>> +#include <asm/vmlinux.lds.h>
> >>>>>> +#include <asm/page.h>
> >>>>>> +#include <asm/pgtable.h>
> >>>>>> +#include <asm/cache.h>
> >>>>>> +#include <asm/thread_info.h>
> >>>>>> +
> >>>>>> +OUTPUT_ARCH(riscv)
> >>>>>> +ENTRY(_start)
> >>>>>> +
> >>>>>> +jiffies = jiffies_64;
> >>>>>> +
> >>>>>> +SECTIONS
> >>>>>> +{
> >>>>>> + /* Beginning of code and text segment */
> >>>>>> + . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
> >>>>>> + _xiprom = .;
> >>>>>> + _start = .;
> >>>>>> + HEAD_TEXT_SECTION
> >>>>>> + INIT_TEXT_SECTION(PAGE_SIZE)
> >>>>>> + /* we have to discard exit text and such at runtime, not
> >>>>>> link time */
> >>>>>> + .exit.text :
> >>>>>> + {
> >>>>>> + EXIT_TEXT
> >>>>>> + }
> >>>>>> +
> >>>>>> + .text : {
> >>>>>> + _text = .;
> >>>>>> + _stext = .;
> >>>>>> + TEXT_TEXT
> >>>>>> + SCHED_TEXT
> >>>>>> + CPUIDLE_TEXT
> >>>>>> + LOCK_TEXT
> >>>>>> + KPROBES_TEXT
> >>>>>> + ENTRY_TEXT
> >>>>>> + IRQENTRY_TEXT
> >>>>>> + SOFTIRQENTRY_TEXT
> >>>>>> + *(.fixup)
> >>>>>> + _etext = .;
> >>>>>> + }
> >>>>>> + RO_DATA(L1_CACHE_BYTES)
> >>>>>> + .srodata : {
> >>>>>> + *(.srodata*)
> >>>>>> + }
> >>>>>> + .init.rodata : {
> >>>>>> + INIT_SETUP(16)
> >>>>>> + INIT_CALLS
> >>>>>> + CON_INITCALL
> >>>>>> + INIT_RAM_FS
> >>>>>> + }
> >>>>>> + _exiprom = .; /* End of XIP ROM area */
> >>>>>> +
> >>>>>> +
> >>>>>> +/*
> >>>>>> + * From this point, stuff is considered writable and will be
> >>>>>> copied to RAM
> >>>>>> + */
> >>>>>> + __data_loc = ALIGN(16); /* location in file */
> >>>>>> + . = PAGE_OFFSET; /* location in memory */
> >>>>>> +
> >>>>>> + _sdata = .; /* Start of data section */
> >>>>>> + _data = .;
> >>>>>> + RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
> >>>>>> + _edata = .;
> >>>>>> + __start_ro_after_init = .;
> >>>>>> + .data.ro_after_init : AT(ADDR(.data.ro_after_init) -
> >>>>>> LOAD_OFFSET) {
> >>>>>> + *(.data..ro_after_init)
> >>>>>> + }
> >>>>>> + __end_ro_after_init = .;
> >>>>>> +
> >>>>>> + . = ALIGN(PAGE_SIZE);
> >>>>>> + __init_begin = .;
> >>>>>> + .init.data : {
> >>>>>> + INIT_DATA
> >>>>>> + }
> >>>>>> + .exit.data : {
> >>>>>> + EXIT_DATA
> >>>>>> + }
> >>>>>> + . = ALIGN(8);
> >>>>>> + __soc_early_init_table : {
> >>>>>> + __soc_early_init_table_start = .;
> >>>>>> + KEEP(*(__soc_early_init_table))
> >>>>>> + __soc_early_init_table_end = .;
> >>>>>> + }
> >>>>>> + __soc_builtin_dtb_table : {
> >>>>>> + __soc_builtin_dtb_table_start = .;
> >>>>>> + KEEP(*(__soc_builtin_dtb_table))
> >>>>>> + __soc_builtin_dtb_table_end = .;
> >>>>>> + }
> >>>>>> + PERCPU_SECTION(L1_CACHE_BYTES)
> >>>>>> +
> >>>>>> + . = ALIGN(PAGE_SIZE);
> >>>>>> + __init_end = .;
> >>>>>> +
> >>>>>> + .sdata : {
> >>>>>> + __global_pointer$ = . + 0x800;
> >>>>>> + *(.sdata*)
> >>>>>> + *(.sbss*)
> >>>>>> + }
> >>>>>> +
> >>>>>> + BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
> >>>>>> + EXCEPTION_TABLE(0x10)
> >>>>>> +
> >>>>>> + .rel.dyn : AT(ADDR(.rel.dyn) - LOAD_OFFSET) {
> >>>>>> + *(.rel.dyn*)
> >>>>>> + }
> >>>>>> +
> >>>>>> + /*
> >>>>>> + * End of copied data. We need a dummy section to get its LMA.
> >>>>>> + * Also located before final ALIGN() as trailing padding is
> >>>>>> not stored
> >>>>>> + * in the resulting binary file and useless to copy.
> >>>>>> + */
> >>>>>> + .data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { }
> >>>>>> + _edata_loc = LOADADDR(.data.endmark);
> >>>>>> +
> >>>>>> + . = ALIGN(PAGE_SIZE);
> >>>>>> + _end = .;
> >>>>>> +
> >>>>>> + STABS_DEBUG
> >>>>>> + DWARF_DEBUG
> >>>>>> +
> >>>>>> + DISCARDS
> >>>>>> +}
> >>>>>> diff --git a/arch/riscv/kernel/vmlinux.lds.S
> >>>>>> b/arch/riscv/kernel/vmlinux.lds.S
> >>>>>> index de03cb22d0e9..6745ec325930 100644
> >>>>>> --- a/arch/riscv/kernel/vmlinux.lds.S
> >>>>>> +++ b/arch/riscv/kernel/vmlinux.lds.S
> >>>>>> @@ -4,7 +4,12 @@
> >>>>>> * Copyright (C) 2017 SiFive
> >>>>>> */
> >>>>>>
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> +#include "vmlinux-xip.lds.S"
> >>>>>> +#else
> >>>>>> +
> >>>>>> #define LOAD_OFFSET PAGE_OFFSET
> >>>>>> +
> >>>>>> #include <asm/vmlinux.lds.h>
> >>>>>> #include <asm/page.h>
> >>>>>> #include <asm/cache.h>
> >>>>>> @@ -132,3 +137,4 @@ SECTIONS
> >>>>>>
> >>>>>> DISCARDS
> >>>>>> }
> >>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
> >>>>>> index 7f5036fbee8c..efe649d41f95 100644
> >>>>>> --- a/arch/riscv/mm/init.c
> >>>>>> +++ b/arch/riscv/mm/init.c
> >>>>>> @@ -31,8 +31,8 @@ EXPORT_SYMBOL(empty_zero_page);
> >>>>>>
> >>>>>> extern char _start[];
> >>>>>> #define DTB_EARLY_BASE_VA PGDIR_SIZE
> >>>>>> -void *dtb_early_va __initdata;
> >>>>>> -uintptr_t dtb_early_pa __initdata;
> >>>>>> +void *_dtb_early_va __initdata;
> >>>>>> +uintptr_t _dtb_early_pa __initdata;
> >>>>>>
> >>>>>> struct pt_alloc_ops {
> >>>>>> pte_t *(*get_pte_virt)(phys_addr_t pa);
> >>>>>> @@ -88,6 +88,10 @@ static void print_vm_layout(void)
> >>>>>> (unsigned long)VMALLOC_END);
> >>>>>> print_mlm("lowmem", (unsigned long)PAGE_OFFSET,
> >>>>>> (unsigned long)high_memory);
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> + print_mlm("xip", (unsigned long)XIP_VIRT_ADDR_START,
> >>>>>> + (unsigned long)XIP_VIRT_ADDR_START + SZ_16M);
> >>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>> }
> >>>>>> #else
> >>>>>> static void print_vm_layout(void) { }
> >>>>>> @@ -113,6 +117,10 @@ void __init setup_bootmem(void)
> >>>>>> phys_addr_t dram_end = memblock_end_of_DRAM();
> >>>>>> phys_addr_t max_mapped_addr = __pa(~(ulong)0);
> >>>>>>
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> + vmlinux_start = __pa_symbol(&_sdata);
> >>>>>> +#endif
> >>>>>> +
> >>>>>> /* The maximal physical memory size is -PAGE_OFFSET. */
> >>>>>> memblock_enforce_memory_limit(-PAGE_OFFSET);
> >>>>>>
> >>>>>> @@ -149,11 +157,27 @@ void __init setup_bootmem(void)
> >>>>>> memblock_allow_resize();
> >>>>>> }
> >>>>>>
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> +
> >>>>>> +extern char _xiprom[], _exiprom[];
> >>>>>> +extern char _sdata[], _edata[];
> >>>>>> +
> >>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>> +
> >>>>>> #ifdef CONFIG_MMU
> >>>>>> -static struct pt_alloc_ops pt_ops;
> >>>>>> +static struct pt_alloc_ops _pt_ops;
> >>>>>> +
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> +#define pt_ops (*(struct pt_alloc_ops *)XIP_FIXUP(&_pt_ops))
> >>>>>> +#else
> >>>>>> +#define pt_ops _pt_ops
> >>>>>> +#endif
> >>>>>>
> >>>>>> unsigned long va_pa_offset;
> >>>>>> EXPORT_SYMBOL(va_pa_offset);
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> +#define va_pa_offset (*((unsigned long *)XIP_FIXUP(&va_pa_offset)))
> >>>>>> +#endif
> >>>>>> unsigned long pfn_base;
> >>>>>> EXPORT_SYMBOL(pfn_base);
> >>>>>>
> >>>>>> @@ -163,6 +187,12 @@ pte_t fixmap_pte[PTRS_PER_PTE]
> >>>>>> __page_aligned_bss;
> >>>>>>
> >>>>>> pgd_t early_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
> >>>>>>
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> +#define trampoline_pg_dir ((pgd_t *)XIP_FIXUP(trampoline_pg_dir))
> >>>>>> +#define fixmap_pte ((pte_t *)XIP_FIXUP(fixmap_pte))
> >>>>>> +#define early_pg_dir ((pgd_t *)XIP_FIXUP(early_pg_dir))
> >>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>> +
> >>>>>> void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys,
> >>>>>> pgprot_t prot)
> >>>>>> {
> >>>>>> unsigned long addr = __fix_to_virt(idx);
> >>>>>> @@ -238,6 +268,15 @@ pmd_t fixmap_pmd[PTRS_PER_PMD]
> >>>>>> __page_aligned_bss;
> >>>>>> pmd_t early_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
> >>>>>> pmd_t early_dtb_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
> >>>>>>
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> +pmd_t xip_pmd[PTRS_PER_PMD] __page_aligned_bss;
> >>>>>> +
> >>>>>> +#define trampoline_pmd ((pmd_t *)XIP_FIXUP(trampoline_pmd))
> >>>>>> +#define fixmap_pmd ((pmd_t *)XIP_FIXUP(fixmap_pmd))
> >>>>>> +#define xip_pmd ((pmd_t *)XIP_FIXUP(xip_pmd))
> >>>>>> +#define early_pmd ((pmd_t *)XIP_FIXUP(early_pmd))
> >>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>> +
> >>>>>> static pmd_t *__init get_pmd_virt_early(phys_addr_t pa)
> >>>>>> {
> >>>>>> /* Before MMU is enabled */
> >>>>>> @@ -354,6 +393,19 @@ static uintptr_t __init
> >>>>>> best_map_size(phys_addr_t base, phys_addr_t size)
> >>>>>> return PMD_SIZE;
> >>>>>> }
> >>>>>>
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> +/* called from head.S with MMU off */
> >>>>>> +asmlinkage void __init __copy_data(void)
> >>>>>> +{
> >>>>>> + void *from = (void *)(&_sdata);
> >>>>>> + void *end = (void *)(&_end);
> >>>>>> + void *to = (void *)CONFIG_PHYS_RAM_BASE;
> >>>>>> + size_t sz = (size_t)(end - from);
> >>>>>> +
> >>>>>> + memcpy(to, from, sz);
> >>>>>> +}
> >>>>>> +#endif
> >>>>>> +
> >>>>>> /*
> >>>>>> * setup_vm() is called from head.S with MMU-off.
> >>>>>> *
> >>>>>> @@ -374,7 +426,8 @@ static uintptr_t __init
> >>>>>> best_map_size(phys_addr_t base, phys_addr_t size)
> >>>>>>
> >>>>>> asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> >>>>>> {
> >>>>>> - uintptr_t va, pa, end_va;
> >>>>>> + uintptr_t va, end_va;
> >>>>>> + uintptr_t __maybe_unused pa;
> >>>>>> uintptr_t load_pa = (uintptr_t)(&_start);
> >>>>>> uintptr_t load_sz = (uintptr_t)(&_end) - load_pa;
> >>>>>> uintptr_t map_size;
> >>>>>> @@ -382,6 +435,13 @@ asmlinkage void __init setup_vm(uintptr_t
> >>>>>> dtb_pa)
> >>>>>> pmd_t fix_bmap_spmd, fix_bmap_epmd;
> >>>>>> #endif
> >>>>>>
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> + uintptr_t xiprom = (uintptr_t)CONFIG_XIP_PHYS_ADDR;
> >>>>>> + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) -
> >>>>>> (uintptr_t)(&_xiprom);
> >>>>>> +
> >>>>>> + load_pa = (uintptr_t)CONFIG_PHYS_RAM_BASE;
> >>>>>> + load_sz = (uintptr_t)(&_end) - (uintptr_t)(&_sdata);
> >>>>>> +#endif
> >>>>>> va_pa_offset = PAGE_OFFSET - load_pa;
> >>>
> >>> I should have seen this before, I was too focused on having a XIP kernel
> >>> boot. I already moved the kernel mapping in the vmalloc zone: the
> >>> virtual to physical translations need to be handled differently now that
> >>> the kernel mapping does not lie into linear mapping anymore, we can't
> >>> use va_pa_offset defined above for both mappings.
> >>>
> >>> I was rebasing my patchset on the XIP patch but I believe that doing the
> >>> other way around would greatly simplify the XIP patch as the kernel
> >>> mapping would already be moved outside the linear mapping, there would
> >>> be no need to reserve a zone in vmalloc anymore (that simplifies
> >>> pgtable.h quite a lot). And the XIP kernel mapping could be implemented
> >>> in a new create_kernel_page_table (that would also simplify mm/init.c).
> >>>
> >>> I can help to do that but I don't think we should merge this patch as is
> >>> now.
> >>
> >> I think that's the right way to go for now: it's a lot harder to test
> >> the XIP stuff, as it requires a bunch of harness changes. So let's
> >> take the page table refactoring in now and rebase this stuff on top of
> >> it. There's really no way to do both without making more work for
> >> someone, it's just a headache on timing.
> >>
> >> Alex: if you want to sign up to spend some time there that'd be great,
> >> otherwise I will.
> >
> > I can take care of that, no problem.
>
> Vitaly, can you try the branch int/alex/riscv_xip_kernel_rebase_v1 at
> https://github.com/AlexGhiti/riscv-linux ? This boots fine using my setup.
>
> I removed most of the pgtable.h stuff, the XIP kernel is now mapped like
> any other kernel at the end of the address space, not in the vmalloc
> zone as you proposed. And I fixed a few thigns along the way (pfn_base,
> pfn_valid, copy_data and other stuff).
>
> Any comment is welcome !
thanks for your efforts!
I've just built your version. The build went well, but the image
doesn't seem to boot for me.
I'll take a look at the code later today.
Best regards,
Vitaly
> Thanks,
>
> Alex
>
> >
> >> Either way, can you point me (either just indicate the old version is
> >> OK or send a new one) to what you want me to look at WRT the page
> >> table code? IIRC it looked pretty much fine, but I'll take another
> >> look ASAP so we can avoid serializing everything.
> >
> > The v3 is fine for me:
> > https://patchwork.kernel.org/project/linux-riscv/list/?series=447699
> >
> >>
> >>>
> >>> Alex
> >>>
> >>>>>> pfn_base = PFN_DOWN(load_pa);
> >>>>>>
> >>>>>> @@ -420,6 +480,21 @@ asmlinkage void __init setup_vm(uintptr_t
> >>>>>> dtb_pa)
> >>>>>> load_pa, PGDIR_SIZE, PAGE_KERNEL_EXEC);
> >>>>>> #endif
> >>>>>>
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> + create_pgd_mapping(trampoline_pg_dir, XIP_VIRT_ADDR_START,
> >>>>>> + (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
> >>>>>> + for (va = XIP_VIRT_ADDR_START;
> >>>>>> + va < XIP_VIRT_ADDR_START + xiprom_sz;
> >>>>>> + va += PMD_SIZE) {
> >>>>>> + create_pmd_mapping(xip_pmd, va,
> >>>>>> + xiprom + (va - XIP_VIRT_ADDR_START),
> >>>>>> + PMD_SIZE, PAGE_KERNEL_EXEC);
> >>>>>> + }
> >>>>>> +
> >>>>>> + create_pgd_mapping(early_pg_dir, XIP_VIRT_ADDR_START,
> >>>>>> + (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
> >>>>>> +#endif
> >>>>>> +
> >>>>>> /*
> >>>>>> * Setup early PGD covering entire kernel which will allows
> >>>>>> * us to reach paging_init(). We map all memory banks later
> >>>>>> @@ -444,7 +519,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> >>>>>> pa + PMD_SIZE, PMD_SIZE, PAGE_KERNEL);
> >>>>>> dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa &
> >>>>>> (PMD_SIZE - 1));
> >>>>>> #else /* CONFIG_BUILTIN_DTB */
> >>>>>> - dtb_early_va = __va(dtb_pa);
> >>>>>> + dtb_early_va = __va(XIP_FIXUP(dtb_pa));
> >>>>>> #endif /* CONFIG_BUILTIN_DTB */
> >>>>>> #else
> >>>>>> #ifndef CONFIG_BUILTIN_DTB
> >>>>>> @@ -456,7 +531,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> >>>>>> pa + PGDIR_SIZE, PGDIR_SIZE, PAGE_KERNEL);
> >>>>>> dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa &
> >>>>>> (PGDIR_SIZE - 1));
> >>>>>> #else /* CONFIG_BUILTIN_DTB */
> >>>>>> - dtb_early_va = __va(dtb_pa);
> >>>>>> + dtb_early_va = __va(XIP_FIXUP(dtb_pa));
> >>>>>> #endif /* CONFIG_BUILTIN_DTB */
> >>>>>> #endif
> >>>>>> dtb_early_pa = dtb_pa;
> >>>>>> @@ -497,6 +572,9 @@ static void __init setup_vm_final(void)
> >>>>>> uintptr_t va, map_size;
> >>>>>> phys_addr_t pa, start, end;
> >>>>>> u64 i;
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) -
> >>>>>> (uintptr_t)(&_xiprom);
> >>>>>> +#endif
> >>>>>>
> >>>>>> /**
> >>>>>> * MMU is enabled at this point. But page table setup is
> >>>>>> not complete yet.
> >>>>>> @@ -528,6 +606,16 @@ static void __init setup_vm_final(void)
> >>>>>> map_size,
> >>>>>> PAGE_KERNEL_EXEC);
> >>>>>> }
> >>>>>> }
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> + map_size = best_map_size(CONFIG_XIP_PHYS_ADDR, xiprom_sz);
> >>>>>> + for (va = XIP_VIRT_ADDR_START;
> >>>>>> + va < XIP_VIRT_ADDR_START + xiprom_sz;
> >>>>>> + va += map_size)
> >>>>>> + create_pgd_mapping(swapper_pg_dir, va,
> >>>>>> + CONFIG_XIP_PHYS_ADDR + (va -
> >>>>>> XIP_VIRT_ADDR_START),
> >>>>>> + map_size, PAGE_KERNEL_EXEC);
> >>>>>> +
> >>>>>> +#endif
> >>>>>>
> >>>>>> /* Clear fixmap PTE and PMD mappings */
> >>>>>> clear_fixmap(FIX_PTE);
> >>>>
> >>>> _______________________________________________
> >>>> linux-riscv mailing list
> >>>> linux-riscv at lists.infradead.org
> >>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
> >>>>
> >>
> >> _______________________________________________
> >> linux-riscv mailing list
> >> linux-riscv at lists.infradead.org
> >> http://lists.infradead.org/mailman/listinfo/linux-riscv
> >
> > _______________________________________________
> > linux-riscv mailing list
> > linux-riscv at lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-riscv
More information about the linux-riscv
mailing list