[PATCH 8/8] ARM: dts: imx: align GPIO hog names with dtschema

[Krzysztof Kozlowski]

dtschema for GPIO controllers expects GPIO hogs to end with 'hog'
prefix.

Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>
---
 arch/arm/boot/dts/imx51-zii-rdu1.dts        | 2 +-
 arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi     | 8 ++++----
 arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 2 +-
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts
index e559ab0c3645..ec8ca3ac2c1c 100644
--- a/arch/arm/boot/dts/imx51-zii-rdu1.dts
+++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
@@ -451,7 +451,7 @@
 			  "", "", "", "",
 			  "", "", "", "";
 
-	unused-sd3-wp-gpio {
+	unused-sd3-wp-hog {
 		/*
 		 * See pinctrl_esdhc1 below for more details on this
 		 */
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index 66b15748e287..c0a76202e16b 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -330,28 +330,28 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpio3_hog>;
 
-	usb-emulation {
+	usb-emulation-hog {
 		gpio-hog;
 		gpios = <19 GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "usb-emulation";
 	};
 
-	usb-mode1 {
+	usb-mode1-hog {
 		gpio-hog;
 		gpios = <20 GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "usb-mode1";
 	};
 
-	usb-pwr {
+	usb-pwr-hog {
 		gpio-hog;
 		gpios = <22 GPIO_ACTIVE_LOW>;
 		output-high;
 		line-name = "usb-pwr-ctrl-en-n";
 	};
 
-	usb-mode2 {
+	usb-mode2-hog {
 		gpio-hog;
 		gpios = <23 GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
index a0bbec57ddc7..3ec042bfccba 100644
--- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
+++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
@@ -110,7 +110,7 @@
 };
 
 &gpio5 {
-	emmc-usd-mux {
+	emmc-usd-mux-hog {
 		gpio-hog;
 		gpios = <1 GPIO_ACTIVE_LOW>;
 		output-high;
-- 
2.17.1