[PATCH v7 5/9] RISC-V: Add PE/COFF header for EFI stub
Ard Biesheuvel
ardb at kernel.org
Fri Sep 11 09:09:15 EDT 2020
On Fri, 28 Aug 2020 at 20:20, Atish Patra <atish.patra at wdc.com> wrote:
>
> Linux kernel Image can appear as an EFI application With appropriate
> PE/COFF header fields in the beginning of the Image header. An EFI
> application loader can directly load a Linux kernel Image and an EFI
> stub residing in kernel can boot Linux kernel directly.
>
> Add the necessary PE/COFF header.
>
> Signed-off-by: Atish Patra <atish.patra at wdc.com>
> Link: https://lore.kernel.org/r/20200421033336.9663-3-atish.patra@wdc.com
> [ardb: - use C prefix for c.li to ensure the expected opcode is emitted
> - align all image sections according to PE/COFF section alignment ]
> Signed-off-by: Ard Biesheuvel <ardb at kernel.org>
> Reviewed-by: Anup Patel <anup at brainfault.org>
Since you need to respin this anyway, one comment below on a thing
that I spotted while revisiting these patches.
> ---
> arch/riscv/include/asm/sections.h | 13 ++++
> arch/riscv/kernel/Makefile | 4 ++
> arch/riscv/kernel/efi-header.S | 104 ++++++++++++++++++++++++++++++
> arch/riscv/kernel/head.S | 16 +++++
> arch/riscv/kernel/image-vars.h | 51 +++++++++++++++
> arch/riscv/kernel/vmlinux.lds.S | 22 ++++++-
> 6 files changed, 208 insertions(+), 2 deletions(-)
> create mode 100644 arch/riscv/include/asm/sections.h
> create mode 100644 arch/riscv/kernel/efi-header.S
> create mode 100644 arch/riscv/kernel/image-vars.h
>
> diff --git a/arch/riscv/include/asm/sections.h b/arch/riscv/include/asm/sections.h
> new file mode 100644
> index 000000000000..3a9971b1210f
> --- /dev/null
> +++ b/arch/riscv/include/asm/sections.h
> @@ -0,0 +1,13 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (C) 2020 Western Digital Corporation or its affiliates.
> + */
> +#ifndef __ASM_SECTIONS_H
> +#define __ASM_SECTIONS_H
> +
> +#include <asm-generic/sections.h>
> +
> +extern char _start[];
> +extern char _start_kernel[];
> +
> +#endif /* __ASM_SECTIONS_H */
> diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
> index dc93710f0b2f..41e3895a3192 100644
> --- a/arch/riscv/kernel/Makefile
> +++ b/arch/riscv/kernel/Makefile
> @@ -31,6 +31,10 @@ obj-y += cacheinfo.o
> obj-y += patch.o
> obj-$(CONFIG_MMU) += vdso.o vdso/
>
> +OBJCOPYFLAGS := --prefix-symbols=__efistub_
> +$(obj)/%.stub.o: $(obj)/%.o FORCE
> + $(call if_changed,objcopy)
> +
> obj-$(CONFIG_RISCV_M_MODE) += traps_misaligned.o
> obj-$(CONFIG_FPU) += fpu.o
> obj-$(CONFIG_SMP) += smpboot.o
> diff --git a/arch/riscv/kernel/efi-header.S b/arch/riscv/kernel/efi-header.S
> new file mode 100644
> index 000000000000..822b4c9ff2bb
> --- /dev/null
> +++ b/arch/riscv/kernel/efi-header.S
> @@ -0,0 +1,104 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (C) 2020 Western Digital Corporation or its affiliates.
> + * Adapted from arch/arm64/kernel/efi-header.S
> + */
> +
> +#include <linux/pe.h>
> +#include <linux/sizes.h>
> +
> + .macro __EFI_PE_HEADER
> + .long PE_MAGIC
> +coff_header:
> +#ifdef CONFIG_64BIT
> + .short IMAGE_FILE_MACHINE_RISCV64 // Machine
> +#else
> + .short IMAGE_FILE_MACHINE_RISCV32 // Machine
> +#endif
> + .short section_count // NumberOfSections
> + .long 0 // TimeDateStamp
> + .long 0 // PointerToSymbolTable
> + .long 0 // NumberOfSymbols
> + .short section_table - optional_header // SizeOfOptionalHeader
> + .short IMAGE_FILE_DEBUG_STRIPPED | \
> + IMAGE_FILE_EXECUTABLE_IMAGE | \
> + IMAGE_FILE_LINE_NUMS_STRIPPED // Characteristics
> +
> +optional_header:
> + .short PE_OPT_MAGIC_PE32PLUS // PE32+ format
Are you sure both riscv32 and riscv64 use PE32+? IIUC, 32-bit
architectures use PE32 not PE32+ (but I could be wrong)
> + .byte 0x02 // MajorLinkerVersion
> + .byte 0x14 // MinorLinkerVersion
> + .long __pecoff_text_end - efi_header_end // SizeOfCode
> + .long __pecoff_data_virt_size // SizeOfInitializedData
> + .long 0 // SizeOfUninitializedData
> + .long __efistub_efi_pe_entry - _start // AddressOfEntryPoint
> + .long efi_header_end - _start // BaseOfCode
> +
> +extra_header_fields:
> + .quad 0 // ImageBase
> + .long PECOFF_SECTION_ALIGNMENT // SectionAlignment
> + .long PECOFF_FILE_ALIGNMENT // FileAlignment
> + .short 0 // MajorOperatingSystemVersion
> + .short 0 // MinorOperatingSystemVersion
> + .short LINUX_EFISTUB_MAJOR_VERSION // MajorImageVersion
> + .short LINUX_EFISTUB_MINOR_VERSION // MinorImageVersion
> + .short 0 // MajorSubsystemVersion
> + .short 0 // MinorSubsystemVersion
> + .long 0 // Win32VersionValue
> +
> + .long _end - _start // SizeOfImage
> +
> + // Everything before the kernel image is considered part of the header
> + .long efi_header_end - _start // SizeOfHeaders
> + .long 0 // CheckSum
> + .short IMAGE_SUBSYSTEM_EFI_APPLICATION // Subsystem
> + .short 0 // DllCharacteristics
> + .quad 0 // SizeOfStackReserve
> + .quad 0 // SizeOfStackCommit
> + .quad 0 // SizeOfHeapReserve
> + .quad 0 // SizeOfHeapCommit
> + .long 0 // LoaderFlags
> + .long (section_table - .) / 8 // NumberOfRvaAndSizes
> +
> + .quad 0 // ExportTable
> + .quad 0 // ImportTable
> + .quad 0 // ResourceTable
> + .quad 0 // ExceptionTable
> + .quad 0 // CertificationTable
> + .quad 0 // BaseRelocationTable
> +
> + // Section table
> +section_table:
> + .ascii ".text\0\0\0"
> + .long __pecoff_text_end - efi_header_end // VirtualSize
> + .long efi_header_end - _start // VirtualAddress
> + .long __pecoff_text_end - efi_header_end // SizeOfRawData
> + .long efi_header_end - _start // PointerToRawData
> +
> + .long 0 // PointerToRelocations
> + .long 0 // PointerToLineNumbers
> + .short 0 // NumberOfRelocations
> + .short 0 // NumberOfLineNumbers
> + .long IMAGE_SCN_CNT_CODE | \
> + IMAGE_SCN_MEM_READ | \
> + IMAGE_SCN_MEM_EXECUTE // Characteristics
> +
> + .ascii ".data\0\0\0"
> + .long __pecoff_data_virt_size // VirtualSize
> + .long __pecoff_text_end - _start // VirtualAddress
> + .long __pecoff_data_raw_size // SizeOfRawData
> + .long __pecoff_text_end - _start // PointerToRawData
> +
> + .long 0 // PointerToRelocations
> + .long 0 // PointerToLineNumbers
> + .short 0 // NumberOfRelocations
> + .short 0 // NumberOfLineNumbers
> + .long IMAGE_SCN_CNT_INITIALIZED_DATA | \
> + IMAGE_SCN_MEM_READ | \
> + IMAGE_SCN_MEM_WRITE // Characteristics
> +
> + .set section_count, (. - section_table) / 40
> +
> + .balign 0x1000
> +efi_header_end:
> + .endm
> diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
> index c6a37e8231a8..3631147732ee 100644
> --- a/arch/riscv/kernel/head.S
> +++ b/arch/riscv/kernel/head.S
> @@ -13,6 +13,7 @@
> #include <asm/csr.h>
> #include <asm/hwcap.h>
> #include <asm/image.h>
> +#include "efi-header.S"
>
> __HEAD
> ENTRY(_start)
> @@ -22,10 +23,18 @@ ENTRY(_start)
> * Do not modify it without modifying the structure and all bootloaders
> * that expects this header format!!
> */
> +#ifdef CONFIG_EFI
> + /*
> + * This instruction decodes to "MZ" ASCII required by UEFI.
> + */
> + c.li s4,-13
> + j _start_kernel
> +#else
> /* jump to start kernel */
> j _start_kernel
> /* reserved */
> .word 0
> +#endif
> .balign 8
> #if __riscv_xlen == 64
> /* Image load offset(2MB) from start of RAM */
> @@ -43,7 +52,14 @@ ENTRY(_start)
> .ascii RISCV_IMAGE_MAGIC
> .balign 4
> .ascii RISCV_IMAGE_MAGIC2
> +#ifdef CONFIG_EFI
> + .word pe_head_start - _start
> +pe_head_start:
> +
> + __EFI_PE_HEADER
> +#else
> .word 0
> +#endif
>
> .align 2
> #ifdef CONFIG_MMU
> diff --git a/arch/riscv/kernel/image-vars.h b/arch/riscv/kernel/image-vars.h
> new file mode 100644
> index 000000000000..8c212efb37a6
> --- /dev/null
> +++ b/arch/riscv/kernel/image-vars.h
> @@ -0,0 +1,51 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (C) 2020 Western Digital Corporation or its affiliates.
> + * Linker script variables to be set after section resolution, as
> + * ld.lld does not like variables assigned before SECTIONS is processed.
> + * Based on arch/arm64/kerne/image-vars.h
> + */
> +#ifndef __RISCV_KERNEL_IMAGE_VARS_H
> +#define __RISCV_KERNEL_IMAGE_VARS_H
> +
> +#ifndef LINKER_SCRIPT
> +#error This file should only be included in vmlinux.lds.S
> +#endif
> +
> +#ifdef CONFIG_EFI
> +
> +/*
> + * The EFI stub has its own symbol namespace prefixed by __efistub_, to
> + * isolate it from the kernel proper. The following symbols are legally
> + * accessed by the stub, so provide some aliases to make them accessible.
> + * Only include data symbols here, or text symbols of functions that are
> + * guaranteed to be safe when executed at another offset than they were
> + * linked at. The routines below are all implemented in assembler in a
> + * position independent manner
> + */
> +__efistub_memcmp = memcmp;
> +__efistub_memchr = memchr;
> +__efistub_memcpy = memcpy;
> +__efistub_memmove = memmove;
> +__efistub_memset = memset;
> +__efistub_strlen = strlen;
> +__efistub_strnlen = strnlen;
> +__efistub_strcmp = strcmp;
> +__efistub_strncmp = strncmp;
> +__efistub_strrchr = strrchr;
> +
> +#ifdef CONFIG_KASAN
> +__efistub___memcpy = memcpy;
> +__efistub___memmove = memmove;
> +__efistub___memset = memset;
> +#endif
> +
> +__efistub__start = _start;
> +__efistub__start_kernel = _start_kernel;
> +__efistub__end = _end;
> +__efistub__edata = _edata;
> +__efistub_screen_info = screen_info;
> +
> +#endif
> +
> +#endif /* __RISCV_KERNEL_IMAGE_VARS_H */
> diff --git a/arch/riscv/kernel/vmlinux.lds.S b/arch/riscv/kernel/vmlinux.lds.S
> index f3586e31ed1e..6dcf790282dd 100644
> --- a/arch/riscv/kernel/vmlinux.lds.S
> +++ b/arch/riscv/kernel/vmlinux.lds.S
> @@ -10,6 +10,7 @@
> #include <asm/cache.h>
> #include <asm/thread_info.h>
> #include <asm/set_memory.h>
> +#include "image-vars.h"
>
> #include <linux/sizes.h>
> OUTPUT_ARCH(riscv)
> @@ -17,6 +18,9 @@ ENTRY(_start)
>
> jiffies = jiffies_64;
>
> +PECOFF_SECTION_ALIGNMENT = 0x1000;
> +PECOFF_FILE_ALIGNMENT = 0x200;
> +
> SECTIONS
> {
> /* Beginning of code and text segment */
> @@ -76,6 +80,10 @@ SECTIONS
>
> EXCEPTION_TABLE(0x10)
>
> +#ifdef CONFIG_EFI
> + . = ALIGN(PECOFF_SECTION_ALIGNMENT);
> + __pecoff_text_end = .;
> +#endif
> . = ALIGN(SECTION_ALIGN);
> _data = .;
>
> @@ -83,16 +91,26 @@ SECTIONS
> .sdata : {
> __global_pointer$ = . + 0x800;
> *(.sdata*)
> - /* End of data section */
> - _edata = .;
> }
>
> +#ifdef CONFIG_EFI
> + .pecoff_edata_padding : { BYTE(0); . = ALIGN(PECOFF_FILE_ALIGNMENT); }
> + __pecoff_data_raw_size = ABSOLUTE(. - __pecoff_text_end);
> +#endif
> +
> + /* End of data section */
> + _edata = .;
> +
> BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
>
> .rel.dyn : {
> *(.rel.dyn*)
> }
>
> +#ifdef CONFIG_EFI
> + . = ALIGN(PECOFF_SECTION_ALIGNMENT);
> + __pecoff_data_virt_size = ABSOLUTE(. - __pecoff_text_end);
> +#endif
> _end = .;
>
> STABS_DEBUG
> --
> 2.24.0
>
More information about the linux-riscv
mailing list