[GIT PULL] RISC-V Fixes for 5.9-rc2
Anup Patel
anup at brainfault.org
Fri Sep 4 05:42:18 EDT 2020
On Fri, Sep 4, 2020 at 2:01 PM Christoph Hellwig <hch at infradead.org> wrote:
>
> On Fri, Aug 21, 2020 at 12:35:20PM -0700, Linus Torvalds wrote:
> > On Fri, Aug 21, 2020 at 11:26 AM Palmer Dabbelt <palmer at dabbelt.com> wrote:
> > >
> > > * The CLINT driver has been split in two: one to handle the M-mode CLINT
> > > (memory mapped and used on NOMMU systems) and one to handle the S-mode CLINT
> > > (via SBI).
> >
> > This looks more like development than fixes.
> >
> > I guess I don't care deeply enough about it, but please don't do this.
>
> Well, I care because this late pull requests completely breaks nommu
> (nommu_virt_defconfig). More specifically commit 2bc3fc877aa9
> ("RISC-V: Remove CLINT related code from timer and arch") leas to this
> spew when booting under qemu:
>
> [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
> [ 0.000000] riscv-intc: 64 local interrupts mapped
> [ 0.000000] plic: interrupt-controller at c000000: mapped 53 interrupts with 2 handlers for 4 contexts.
> [ 0.000000] Oops - illegal instruction [#1]
> [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.9.0-rc1-00003-g2bc3fc877aa9c4 #609
> [ 0.000000] epc: 000000008000de78 ra : 000000008000ddaa sp : 0000000080187f40
> [ 0.000000] gp : 00000000801a3aa8 tp : 000000008018bd40 t0 : 0000000000000019
> [ 0.000000] t1 : 0000000000000018 t2 : 0000000000000001 s0 : 0000000080187f80
> [ 0.000000] s1 : 0000000000000200 a0 : 000000008019b738 a1 : 0000000000000000
> [ 0.000000] a2 : ffffffff80187f50 a3 : 0000000000000000 a4 : 0000000000000000
> [ 0.000000] a5 : 0000000080169018 a6 : 0000000000000000 a7 : 00000000000001e4
> [ 0.000000] s2 : 00000000801a40a8 s3 : 00000000801a4068 s4 : 000000008fc7c040
> [ 0.000000] s5 : 00000000801a4038 s6 : 00000000801a4030 s7 : 0000000080012da0
> [ 0.000000] s8 : 0000000000000000 s9 : 0000000000000000 s10: 0000000000000000
> [ 0.000000] s11: 0000000000000000 t3 : 00000000801c40d8 t4 : 0000000000000068
> [ 0.000000] t5 : 000000000000004c t6 : 0000000000000033
> [ 0.000000] status: 0000000000001800 badaddr: 0000000000000000 cause: 0000000000000002
> [ 0.000000] random: get_random_bytes called from 0x00000000800210c4 with crng_init=0
> [ 0.000000] ---[ end trace 0000000000000000 ]---
> [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
> [ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]---
I tried Linux-5.9-rc3 using nommu_virt_defconfig at my end. I am not
able to reproduce
this issue. Is there additional Kconfig option required to reproduce
this issue ??
anup at anup-ubuntu64-vm:~/Work/riscv-test/nommu$ qemu-system-riscv64 -M
virt -m 8M -display none -nographic -kernel
./build-riscv64/arch/riscv/boot/loader -append "root=/dev/ram rw
console=ttyS0" -smp 4
qemu-system-riscv64: warning: No -bios option specified. Not loading a firmware.
qemu-system-riscv64: warning: This default will change in a future
QEMU release. Please use the -bios option to avoid breakages when this
happens.
qemu-system-riscv64: warning: See QEMU's deprecation documentation for details.
[ 0.000000] Linux version 5.9.0-rc3 (anup at anup-ubuntu64-vm)
(riscv64-unknown-linux-gnu-gcc (GCC) 9.2.0, GNU ld (GNU Binutils)
2.34) #1 SMP Fri Sep 4 15:02:31 IST 2020
[ 0.000000] earlycon: uart8250 at MMIO 0x0000000010000000 (options
'115200n8')
[ 0.000000] printk: bootconsole [uart8250] enabled
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000080000000-0x00000000807fffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x00000000807fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000807fffff]
[ 0.000000] riscv: ISA extensions acdfimsu
[ 0.000000] riscv: ELF capabilities acdfim
[ 0.000000] percpu: max_distance=0x30000 too large for vmalloc space 0x0
[ 0.000000] percpu: Embedded 12 pages/cpu s18592 r0 d30560 u49152
[ 0.000000] Built 1 zonelists, mobility grouping off. Total pages: 2020
[ 0.000000] Kernel command line: root=/dev/vda rw
earlycon=uart8250,mmio,0x10000000,115200n8 console=ttyS0
[ 0.000000] Dentry cache hash table entries: 1024 (order: 1, 8192
bytes, linear)
[ 0.000000] Inode-cache hash table entries: 512 (order: 0, 4096
bytes, linear)
[ 0.000000] Sorting __ex_table...
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 6016K/8192K available (1283K kernel code, 138K
rwdata, 200K rodata, 106K init, 133K bss, 2176K reserved, 0K
cma-reserved)
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay
is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] riscv-intc: 64 local interrupts mapped
[ 0.000000] plic: plic at c000000: mapped 53 interrupts with 4
handlers for 8 contexts.
[ 0.000000] random: get_random_bytes called from 0x00000000800019b4
with crng_init=0
[ 0.000000] clint: clint at 2000000: timer running at 10000000 Hz
[ 0.000000] clocksource: clint_clocksource: mask:
0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120
ns
[ 0.000212] sched_clock: 64 bits at 10MHz, resolution 100ns, wraps
every 4398046511100ns
[ 0.016835] Console: colour dummy device 80x25
[ 0.034899] Calibrating delay loop (skipped), value calculated
using timer frequency.. 20.00 BogoMIPS (lpj=40000)
[ 0.050107] pid_max: default: 4096 minimum: 301
[ 0.051951] Mount-cache hash table entries: 512 (order: 0, 4096
bytes, linear)
[ 0.052711] Mountpoint-cache hash table entries: 512 (order: 0,
4096 bytes, linear)
[ 0.151318] rcu: Hierarchical SRCU implementation.
[ 0.158697] smp: Bringing up secondary CPUs ...
[ 0.213140] smp: Brought up 1 node, 4 CPUs
[ 0.245903] devtmpfs: initialized
[ 0.262757] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.264822] futex hash table entries: 16 (order: -2, 1024 bytes, linear)
[ 0.413555] clocksource: Switched to clocksource clint_clocksource
[ 0.580364] workingset: timestamp_bits=62 max_order=11 bucket_order=0
[ 0.589640] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.604478] printk: console [ttyS0] disabled
[ 0.611025] 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 2,
base_baud = 230400) is a 16550A
[ 0.621897] printk: console [ttyS0] enabled
[ 0.621897] printk: console [ttyS0] enabled
[ 0.622997] printk: bootconsole [uart8250] disabled
[ 0.622997] printk: bootconsole [uart8250] disabled
[ 0.646964] syscon-poweroff soc:poweroff: pm_power_off already
claimed (____ptrval____)
[ 0.648264] syscon-poweroff: probe of soc:poweroff failed with error -16
[ 0.677403] VFS: Cannot open root device "vda" or
unknown-block(0,0): error -6
[ 0.679474] Please append a correct "root=" boot option; here are
the available partitions:
[ 0.682862] Kernel panic - not syncing: VFS: Unable to mount root
fs on unknown-block(0,0)
Regards,
Anup
More information about the linux-riscv
mailing list