[PATCH 1/3] irqchip/irq-sifive-plic: Fixup wrong size of xxx_PER_HART and reg base

guoren at kernel.org guoren at kernel.org
Fri Oct 23 06:17:23 EDT 2020


From: Guo Ren <guoren at linux.alibaba.com>

ENABLE and CONTEXT registers contain M & S status for per-hart, so
ref to the specification the correct definition is double to the
current value.

The value of hart_base and enable_base should be calculated by real
physical hartid not software id. Sometimes the CPU node's <reg>
from dts is not equal to the sequence index.

Signed-off-by: Guo Ren <guoren at linux.alibaba.com>
---
 drivers/irqchip/irq-sifive-plic.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c
index eaa3e9f..2e56576 100644
--- a/drivers/irqchip/irq-sifive-plic.c
+++ b/drivers/irqchip/irq-sifive-plic.c
@@ -44,16 +44,16 @@
  * Each hart context has a vector of interrupt enable bits associated with it.
  * There's one bit for each interrupt source.
  */
-#define ENABLE_BASE			0x2000
-#define     ENABLE_PER_HART		0x80
+#define ENABLE_BASE			0x2080
+#define     ENABLE_PER_HART		0x100
 
 /*
  * Each hart context has a set of control registers associated with it.  Right
  * now there's only two: a source priority threshold over which the hart will
  * take an interrupt, and a register to claim interrupts.
  */
-#define CONTEXT_BASE			0x200000
-#define     CONTEXT_PER_HART		0x1000
+#define CONTEXT_BASE			0x201000
+#define     CONTEXT_PER_HART		0x2000
 #define     CONTEXT_THRESHOLD		0x00
 #define     CONTEXT_CLAIM		0x04
 
@@ -358,10 +358,10 @@ static int __init plic_init(struct device_node *node,
 		cpumask_set_cpu(cpu, &priv->lmask);
 		handler->present = true;
 		handler->hart_base =
-			priv->regs + CONTEXT_BASE + i * CONTEXT_PER_HART;
+			priv->regs + CONTEXT_BASE + hartid * CONTEXT_PER_HART;
 		raw_spin_lock_init(&handler->enable_lock);
 		handler->enable_base =
-			priv->regs + ENABLE_BASE + i * ENABLE_PER_HART;
+			priv->regs + ENABLE_BASE + hartid * ENABLE_PER_HART;
 		handler->priv = priv;
 done:
 		for (hwirq = 1; hwirq <= nr_irqs; hwirq++)
-- 
2.7.4




More information about the linux-riscv mailing list