[PATCH v4 3/4] clk: sifive: Add a driver for the SiFive FU740 PRCI IP block
Palmer Dabbelt
palmer at dabbelt.com
Fri Nov 20 20:29:30 EST 2020
On Wed, 11 Nov 2020 02:06:07 PST (-0800), zong.li at sifive.com wrote:
> Add driver code for the SiFive FU740 PRCI IP block. This IP block
> handles reset and clock control for the SiFive FU740 device and
> implements SoC-level clock tree controls and dividers.
>
> This driver contains bug fixes and contributions from
> Henry Styles <hes at sifive.com>
> Erik Danie <erik.danie at sifive.com>
> Pragnesh Patel <pragnesh.patel at sifive.com>
>
> Signed-off-by: Zong Li <zong.li at sifive.com>
> Reviewed-by: Pragnesh Patel <Pragnesh.patel at sifive.com>
> Cc: Henry Styles <hes at sifive.com>
> Cc: Erik Danie <erik.danie at sifive.com>
> Cc: Pragnesh Patel <pragnesh.patel at sifive.com>
> ---
> drivers/clk/sifive/Kconfig | 4 +-
> drivers/clk/sifive/Makefile | 1 +
> drivers/clk/sifive/fu740-prci.c | 122 ++++++++++++++++++
> drivers/clk/sifive/fu740-prci.h | 21 +++
> drivers/clk/sifive/sifive-prci.c | 120 +++++++++++++++++
> drivers/clk/sifive/sifive-prci.h | 88 +++++++++++++
> include/dt-bindings/clock/sifive-fu740-prci.h | 23 ++++
I don't see the bindings in Documentation, but assuming they're in flight
Acked-by: Palmer Dabbelt <palmerdabbelt at google.com>
Thanks!
> 7 files changed, 377 insertions(+), 2 deletions(-)
> create mode 100644 drivers/clk/sifive/fu740-prci.c
> create mode 100644 drivers/clk/sifive/fu740-prci.h
> create mode 100644 include/dt-bindings/clock/sifive-fu740-prci.h
>
> diff --git a/drivers/clk/sifive/Kconfig b/drivers/clk/sifive/Kconfig
> index ab48cf7e0105..1c14eb20c066 100644
> --- a/drivers/clk/sifive/Kconfig
> +++ b/drivers/clk/sifive/Kconfig
> @@ -13,7 +13,7 @@ config CLK_SIFIVE_PRCI
> select CLK_ANALOGBITS_WRPLL_CLN28HPC
> help
> Supports the Power Reset Clock interface (PRCI) IP block found in
> - FU540 SoCs. If this kernel is meant to run on a SiFive FU540 SoC,
> - enable this driver.
> + FU540/FU740 SoCs. If this kernel is meant to run on a SiFive FU540/
> + FU740 SoCs, enable this driver.
>
> endif
> diff --git a/drivers/clk/sifive/Makefile b/drivers/clk/sifive/Makefile
> index fe3e2cb4c4d8..2c05798e4ba4 100644
> --- a/drivers/clk/sifive/Makefile
> +++ b/drivers/clk/sifive/Makefile
> @@ -2,3 +2,4 @@
> obj-y += sifive-prci.o
>
> obj-$(CONFIG_CLK_SIFIVE_PRCI) += fu540-prci.o
> +obj-$(CONFIG_CLK_SIFIVE_PRCI) += fu740-prci.o
> diff --git a/drivers/clk/sifive/fu740-prci.c b/drivers/clk/sifive/fu740-prci.c
> new file mode 100644
> index 000000000000..3b87e273c3eb
> --- /dev/null
> +++ b/drivers/clk/sifive/fu740-prci.c
> @@ -0,0 +1,122 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2018-2019 SiFive, Inc.
> + * Wesley Terpstra
> + * Paul Walmsley
> + * Zong Li
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <dt-bindings/clock/sifive-fu740-prci.h>
> +#include <linux/module.h>
> +#include "sifive-prci.h"
> +
> +/* PRCI integration data for each WRPLL instance */
> +
> +static struct __prci_wrpll_data __prci_corepll_data = {
> + .cfg0_offs = PRCI_COREPLLCFG0_OFFSET,
> + .enable_bypass = sifive_prci_coreclksel_use_hfclk,
> + .disable_bypass = sifive_prci_coreclksel_use_final_corepll,
> +};
> +
> +static struct __prci_wrpll_data __prci_ddrpll_data = {
> + .cfg0_offs = PRCI_DDRPLLCFG0_OFFSET,
> +};
> +
> +static struct __prci_wrpll_data __prci_gemgxlpll_data = {
> + .cfg0_offs = PRCI_GEMGXLPLLCFG0_OFFSET,
> +};
> +
> +static struct __prci_wrpll_data __prci_dvfscorepll_data = {
> + .cfg0_offs = PRCI_DVFSCOREPLLCFG0_OFFSET,
> + .enable_bypass = sifive_prci_corepllsel_use_corepll,
> + .disable_bypass = sifive_prci_corepllsel_use_dvfscorepll,
> +};
> +
> +static struct __prci_wrpll_data __prci_hfpclkpll_data = {
> + .cfg0_offs = PRCI_HFPCLKPLLCFG0_OFFSET,
> + .enable_bypass = sifive_prci_hfpclkpllsel_use_hfclk,
> + .disable_bypass = sifive_prci_hfpclkpllsel_use_hfpclkpll,
> +};
> +
> +static struct __prci_wrpll_data __prci_cltxpll_data = {
> + .cfg0_offs = PRCI_CLTXPLLCFG0_OFFSET,
> +};
> +
> +/* Linux clock framework integration */
> +
> +static const struct clk_ops sifive_fu740_prci_wrpll_clk_ops = {
> + .set_rate = sifive_prci_wrpll_set_rate,
> + .round_rate = sifive_prci_wrpll_round_rate,
> + .recalc_rate = sifive_prci_wrpll_recalc_rate,
> +};
> +
> +static const struct clk_ops sifive_fu740_prci_wrpll_ro_clk_ops = {
> + .recalc_rate = sifive_prci_wrpll_recalc_rate,
> +};
> +
> +static const struct clk_ops sifive_fu740_prci_tlclksel_clk_ops = {
> + .recalc_rate = sifive_prci_tlclksel_recalc_rate,
> +};
> +
> +static const struct clk_ops sifive_fu740_prci_hfpclkplldiv_clk_ops = {
> + .recalc_rate = sifive_prci_hfpclkplldiv_recalc_rate,
> +};
> +
> +/* List of clock controls provided by the PRCI */
> +struct __prci_clock __prci_init_clocks_fu740[] = {
> + [PRCI_CLK_COREPLL] = {
> + .name = "corepll",
> + .parent_name = "hfclk",
> + .ops = &sifive_fu740_prci_wrpll_clk_ops,
> + .pwd = &__prci_corepll_data,
> + },
> + [PRCI_CLK_DDRPLL] = {
> + .name = "ddrpll",
> + .parent_name = "hfclk",
> + .ops = &sifive_fu740_prci_wrpll_ro_clk_ops,
> + .pwd = &__prci_ddrpll_data,
> + },
> + [PRCI_CLK_GEMGXLPLL] = {
> + .name = "gemgxlpll",
> + .parent_name = "hfclk",
> + .ops = &sifive_fu740_prci_wrpll_clk_ops,
> + .pwd = &__prci_gemgxlpll_data,
> + },
> + [PRCI_CLK_DVFSCOREPLL] = {
> + .name = "dvfscorepll",
> + .parent_name = "hfclk",
> + .ops = &sifive_fu740_prci_wrpll_clk_ops,
> + .pwd = &__prci_dvfscorepll_data,
> + },
> + [PRCI_CLK_HFPCLKPLL] = {
> + .name = "hfpclkpll",
> + .parent_name = "hfclk",
> + .ops = &sifive_fu740_prci_wrpll_clk_ops,
> + .pwd = &__prci_hfpclkpll_data,
> + },
> + [PRCI_CLK_CLTXPLL] = {
> + .name = "cltxpll",
> + .parent_name = "hfclk",
> + .ops = &sifive_fu740_prci_wrpll_clk_ops,
> + .pwd = &__prci_cltxpll_data,
> + },
> + [PRCI_CLK_TLCLK] = {
> + .name = "tlclk",
> + .parent_name = "corepll",
> + .ops = &sifive_fu740_prci_tlclksel_clk_ops,
> + },
> + [PRCI_CLK_PCLK] = {
> + .name = "pclk",
> + .parent_name = "hfpclkpll",
> + .ops = &sifive_fu740_prci_hfpclkplldiv_clk_ops,
> + },
> +};
> diff --git a/drivers/clk/sifive/fu740-prci.h b/drivers/clk/sifive/fu740-prci.h
> new file mode 100644
> index 000000000000..13ef971f7764
> --- /dev/null
> +++ b/drivers/clk/sifive/fu740-prci.h
> @@ -0,0 +1,21 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2020 SiFive, Inc.
> + * Zong Li
> + */
> +
> +#ifndef __SIFIVE_CLK_FU740_PRCI_H
> +#define __SIFIVE_CLK_FU740_PRCI_H
> +
> +#include "sifive-prci.h"
> +
> +#define NUM_CLOCK_FU740 8
> +
> +extern struct __prci_clock __prci_init_clocks_fu740[NUM_CLOCK_FU740];
> +
> +static const struct prci_clk_desc prci_clk_fu740 = {
> + .clks = __prci_init_clocks_fu740,
> + .num_clks = ARRAY_SIZE(__prci_init_clocks_fu740),
> +};
> +
> +#endif /* __SIFIVE_CLK_FU740_PRCI_H */
> diff --git a/drivers/clk/sifive/sifive-prci.c b/drivers/clk/sifive/sifive-prci.c
> index 0ac729eeb71b..4098dbc5881a 100644
> --- a/drivers/clk/sifive/sifive-prci.c
> +++ b/drivers/clk/sifive/sifive-prci.c
> @@ -27,6 +27,7 @@
> #include <linux/of_device.h>
> #include "sifive-prci.h"
> #include "fu540-prci.h"
> +#include "fu740-prci.h"
>
> /*
> * Private functions
> @@ -242,6 +243,18 @@ unsigned long sifive_prci_tlclksel_recalc_rate(struct clk_hw *hw,
> return div_u64(parent_rate, div);
> }
>
> +/* HFPCLK clock integration */
> +
> +unsigned long sifive_prci_hfpclkplldiv_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
> + struct __prci_data *pd = pc->pd;
> + u32 div = __prci_readl(pd, PRCI_HFPCLKPLLDIV_OFFSET);
> +
> + return div_u64(parent_rate, div + 2);
> +}
> +
> /*
> * Core clock mux control
> */
> @@ -287,6 +300,112 @@ void sifive_prci_coreclksel_use_corepll(struct __prci_data *pd)
> r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
> }
>
> +/**
> + * sifive_prci_coreclksel_use_final_corepll() - switch the CORECLK mux to output
> + * FINAL_COREPLL
> + * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg
> + *
> + * Switch the CORECLK mux to the final COREPLL output clock; return once
> + * complete.
> + *
> + * Context: Any context. Caller must prevent concurrent changes to the
> + * PRCI_CORECLKSEL_OFFSET register.
> + */
> +void sifive_prci_coreclksel_use_final_corepll(struct __prci_data *pd)
> +{
> + u32 r;
> +
> + r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);
> + r &= ~PRCI_CORECLKSEL_CORECLKSEL_MASK;
> + __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd);
> +
> + r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
> +}
> +
> +/**
> + * sifive_prci_corepllsel_use_dvfscorepll() - switch the COREPLL mux to
> + * output DVFS_COREPLL
> + * @pd: struct __prci_data * for the PRCI containing the COREPLL mux reg
> + *
> + * Switch the COREPLL mux to the DVFSCOREPLL output clock; return once complete.
> + *
> + * Context: Any context. Caller must prevent concurrent changes to the
> + * PRCI_COREPLLSEL_OFFSET register.
> + */
> +void sifive_prci_corepllsel_use_dvfscorepll(struct __prci_data *pd)
> +{
> + u32 r;
> +
> + r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET);
> + r |= PRCI_COREPLLSEL_COREPLLSEL_MASK;
> + __prci_writel(r, PRCI_COREPLLSEL_OFFSET, pd);
> +
> + r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET); /* barrier */
> +}
> +
> +/**
> + * sifive_prci_corepllsel_use_corepll() - switch the COREPLL mux to
> + * output COREPLL
> + * @pd: struct __prci_data * for the PRCI containing the COREPLL mux reg
> + *
> + * Switch the COREPLL mux to the COREPLL output clock; return once complete.
> + *
> + * Context: Any context. Caller must prevent concurrent changes to the
> + * PRCI_COREPLLSEL_OFFSET register.
> + */
> +void sifive_prci_corepllsel_use_corepll(struct __prci_data *pd)
> +{
> + u32 r;
> +
> + r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET);
> + r &= ~PRCI_COREPLLSEL_COREPLLSEL_MASK;
> + __prci_writel(r, PRCI_COREPLLSEL_OFFSET, pd);
> +
> + r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET); /* barrier */
> +}
> +
> +/**
> + * sifive_prci_hfpclkpllsel_use_hfclk() - switch the HFPCLKPLL mux to
> + * output HFCLK
> + * @pd: struct __prci_data * for the PRCI containing the HFPCLKPLL mux reg
> + *
> + * Switch the HFPCLKPLL mux to the HFCLK input source; return once complete.
> + *
> + * Context: Any context. Caller must prevent concurrent changes to the
> + * PRCI_HFPCLKPLLSEL_OFFSET register.
> + */
> +void sifive_prci_hfpclkpllsel_use_hfclk(struct __prci_data *pd)
> +{
> + u32 r;
> +
> + r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET);
> + r |= PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_MASK;
> + __prci_writel(r, PRCI_HFPCLKPLLSEL_OFFSET, pd);
> +
> + r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET); /* barrier */
> +}
> +
> +/**
> + * sifive_prci_hfpclkpllsel_use_hfpclkpll() - switch the HFPCLKPLL mux to
> + * output HFPCLKPLL
> + * @pd: struct __prci_data * for the PRCI containing the HFPCLKPLL mux reg
> + *
> + * Switch the HFPCLKPLL mux to the HFPCLKPLL output clock; return once complete.
> + *
> + * Context: Any context. Caller must prevent concurrent changes to the
> + * PRCI_HFPCLKPLLSEL_OFFSET register.
> + */
> +void sifive_prci_hfpclkpllsel_use_hfpclkpll(struct __prci_data *pd)
> +{
> + u32 r;
> +
> + r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET);
> + r &= ~PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_MASK;
> + __prci_writel(r, PRCI_HFPCLKPLLSEL_OFFSET, pd);
> +
> + r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET); /* barrier */
> +}
> +
> /**
> * __prci_register_clocks() - register clock controls in the PRCI
> * @dev: Linux struct device *
> @@ -391,6 +510,7 @@ static int sifive_prci_probe(struct platform_device *pdev)
>
> static const struct of_device_id sifive_prci_of_match[] = {
> {.compatible = "sifive,fu540-c000-prci", .data = &prci_clk_fu540},
> + {.compatible = "sifive,fu740-c000-prci", .data = &prci_clk_fu740},
> {}
> };
>
> diff --git a/drivers/clk/sifive/sifive-prci.h b/drivers/clk/sifive/sifive-prci.h
> index 025f717bc053..802fc8fb9c09 100644
> --- a/drivers/clk/sifive/sifive-prci.h
> +++ b/drivers/clk/sifive/sifive-prci.h
> @@ -117,6 +117,87 @@
> #define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK \
> (0x1 << PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT)
>
> +/* CLTXPLLCFG0 */
> +#define PRCI_CLTXPLLCFG0_OFFSET 0x30
> +#define PRCI_CLTXPLLCFG0_DIVR_SHIFT 0
> +#define PRCI_CLTXPLLCFG0_DIVR_MASK (0x3f << PRCI_CLTXPLLCFG0_DIVR_SHIFT)
> +#define PRCI_CLTXPLLCFG0_DIVF_SHIFT 6
> +#define PRCI_CLTXPLLCFG0_DIVF_MASK (0x1ff << PRCI_CLTXPLLCFG0_DIVF_SHIFT)
> +#define PRCI_CLTXPLLCFG0_DIVQ_SHIFT 15
> +#define PRCI_CLTXPLLCFG0_DIVQ_MASK (0x7 << PRCI_CLTXPLLCFG0_DIVQ_SHIFT)
> +#define PRCI_CLTXPLLCFG0_RANGE_SHIFT 18
> +#define PRCI_CLTXPLLCFG0_RANGE_MASK (0x7 << PRCI_CLTXPLLCFG0_RANGE_SHIFT)
> +#define PRCI_CLTXPLLCFG0_BYPASS_SHIFT 24
> +#define PRCI_CLTXPLLCFG0_BYPASS_MASK (0x1 << PRCI_CLTXPLLCFG0_BYPASS_SHIFT)
> +#define PRCI_CLTXPLLCFG0_FSE_SHIFT 25
> +#define PRCI_CLTXPLLCFG0_FSE_MASK (0x1 << PRCI_CLTXPLLCFG0_FSE_SHIFT)
> +#define PRCI_CLTXPLLCFG0_LOCK_SHIFT 31
> +#define PRCI_CLTXPLLCFG0_LOCK_MASK (0x1 << PRCI_CLTXPLLCFG0_LOCK_SHIFT)
> +
> +/* CLTXPLLCFG1 */
> +#define PRCI_CLTXPLLCFG1_OFFSET 0x34
> +#define PRCI_CLTXPLLCFG1_CKE_SHIFT 31
> +#define PRCI_CLTXPLLCFG1_CKE_MASK (0x1 << PRCI_CLTXPLLCFG1_CKE_SHIFT)
> +
> +/* DVFSCOREPLLCFG0 */
> +#define PRCI_DVFSCOREPLLCFG0_OFFSET 0x38
> +
> +/* DVFSCOREPLLCFG1 */
> +#define PRCI_DVFSCOREPLLCFG1_OFFSET 0x3c
> +#define PRCI_DVFSCOREPLLCFG1_CKE_SHIFT 31
> +#define PRCI_DVFSCOREPLLCFG1_CKE_MASK (0x1 << PRCI_DVFSCOREPLLCFG1_CKE_SHIFT)
> +
> +/* COREPLLSEL */
> +#define PRCI_COREPLLSEL_OFFSET 0x40
> +#define PRCI_COREPLLSEL_COREPLLSEL_SHIFT 0
> +#define PRCI_COREPLLSEL_COREPLLSEL_MASK \
> + (0x1 << PRCI_COREPLLSEL_COREPLLSEL_SHIFT)
> +
> +/* HFPCLKPLLCFG0 */
> +#define PRCI_HFPCLKPLLCFG0_OFFSET 0x50
> +#define PRCI_HFPCLKPLL_CFG0_DIVR_SHIFT 0
> +#define PRCI_HFPCLKPLL_CFG0_DIVR_MASK \
> + (0x3f << PRCI_HFPCLKPLLCFG0_DIVR_SHIFT)
> +#define PRCI_HFPCLKPLL_CFG0_DIVF_SHIFT 6
> +#define PRCI_HFPCLKPLL_CFG0_DIVF_MASK \
> + (0x1ff << PRCI_HFPCLKPLLCFG0_DIVF_SHIFT)
> +#define PRCI_HFPCLKPLL_CFG0_DIVQ_SHIFT 15
> +#define PRCI_HFPCLKPLL_CFG0_DIVQ_MASK \
> + (0x7 << PRCI_HFPCLKPLLCFG0_DIVQ_SHIFT)
> +#define PRCI_HFPCLKPLL_CFG0_RANGE_SHIFT 18
> +#define PRCI_HFPCLKPLL_CFG0_RANGE_MASK \
> + (0x7 << PRCI_HFPCLKPLLCFG0_RANGE_SHIFT)
> +#define PRCI_HFPCLKPLL_CFG0_BYPASS_SHIFT 24
> +#define PRCI_HFPCLKPLL_CFG0_BYPASS_MASK \
> + (0x1 << PRCI_HFPCLKPLLCFG0_BYPASS_SHIFT)
> +#define PRCI_HFPCLKPLL_CFG0_FSE_SHIFT 25
> +#define PRCI_HFPCLKPLL_CFG0_FSE_MASK \
> + (0x1 << PRCI_HFPCLKPLLCFG0_FSE_SHIFT)
> +#define PRCI_HFPCLKPLL_CFG0_LOCK_SHIFT 31
> +#define PRCI_HFPCLKPLL_CFG0_LOCK_MASK \
> + (0x1 << PRCI_HFPCLKPLLCFG0_LOCK_SHIFT)
> +
> +/* HFPCLKPLLCFG1 */
> +#define PRCI_HFPCLKPLLCFG1_OFFSET 0x54
> +#define PRCI_HFPCLKPLLCFG1_CKE_SHIFT 31
> +#define PRCI_HFPCLKPLLCFG1_CKE_MASK \
> + (0x1 << PRCI_HFPCLKPLLCFG1_CKE_SHIFT)
> +
> +/* HFPCLKPLLSEL */
> +#define PRCI_HFPCLKPLLSEL_OFFSET 0x58
> +#define PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_SHIFT 0
> +#define PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_MASK \
> + (0x1 << PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_SHIFT)
> +
> +/* HFPCLKPLLDIV */
> +#define PRCI_HFPCLKPLLDIV_OFFSET 0x5c
> +
> +/* PRCIPLL */
> +#define PRCI_PRCIPLL_OFFSET 0xe0
> +
> +/* PROCMONCFG */
> +#define PRCI_PROCMONCFG_OFFSET 0xf0
> +
> /*
> * Private structures
> */
> @@ -187,6 +268,11 @@ struct prci_clk_desc {
> /* Core clock mux control */
> void sifive_prci_coreclksel_use_hfclk(struct __prci_data *pd);
> void sifive_prci_coreclksel_use_corepll(struct __prci_data *pd);
> +void sifive_prci_coreclksel_use_final_corepll(struct __prci_data *pd);
> +void sifive_prci_corepllsel_use_dvfscorepll(struct __prci_data *pd);
> +void sifive_prci_corepllsel_use_corepll(struct __prci_data *pd);
> +void sifive_prci_hfpclkpllsel_use_hfclk(struct __prci_data *pd);
> +void sifive_prci_hfpclkpllsel_use_hfpclkpll(struct __prci_data *pd);
>
> /* Linux clock framework integration */
> long sifive_prci_wrpll_round_rate(struct clk_hw *hw, unsigned long rate,
> @@ -197,5 +283,7 @@ unsigned long sifive_prci_wrpll_recalc_rate(struct clk_hw *hw,
> unsigned long parent_rate);
> unsigned long sifive_prci_tlclksel_recalc_rate(struct clk_hw *hw,
> unsigned long parent_rate);
> +unsigned long sifive_prci_hfpclkplldiv_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate);
>
> #endif /* __SIFIVE_CLK_SIFIVE_PRCI_H */
> diff --git a/include/dt-bindings/clock/sifive-fu740-prci.h b/include/dt-bindings/clock/sifive-fu740-prci.h
> new file mode 100644
> index 000000000000..cd7706ea5677
> --- /dev/null
> +++ b/include/dt-bindings/clock/sifive-fu740-prci.h
> @@ -0,0 +1,23 @@
> +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
> +/*
> + * Copyright (C) 2019 SiFive, Inc.
> + * Wesley Terpstra
> + * Paul Walmsley
> + * Zong Li
> + */
> +
> +#ifndef __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H
> +#define __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H
> +
> +/* Clock indexes for use by Device Tree data and the PRCI driver */
> +
> +#define PRCI_CLK_COREPLL 0
> +#define PRCI_CLK_DDRPLL 1
> +#define PRCI_CLK_GEMGXLPLL 2
> +#define PRCI_CLK_DVFSCOREPLL 3
> +#define PRCI_CLK_HFPCLKPLL 4
> +#define PRCI_CLK_CLTXPLL 5
> +#define PRCI_CLK_TLCLK 6
> +#define PRCI_CLK_PCLK 7
> +
> +#endif /* __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H */
More information about the linux-riscv
mailing list