[PATCH 24/32] dt-bindings: Document kendryte,k210-fpioa bindings

[Damien Le Moal]

On 2020/11/11 23:32, Rob Herring wrote:
> On Mon, Nov 9, 2020 at 9:45 AM Sean Anderson <seanga2 at gmail.com> wrote:
>>
>> On 11/9/20 10:36 AM, Rob Herring wrote:
>>> On Sat, Nov 07, 2020 at 05:14:12PM +0900, Damien Le Moal wrote:
>>>> Document the device tree bindings for the Kendryte K210 SoC Fully
>>>> Programmable IO Array (FPIOA) pinctrl driver in
>>>> Documentation/devicetree/bindings/pinctrl/kendryte,k210-fpioa.yaml
>>>>
>>>> Signed-off-by: Damien Le Moal <damien.lemoal at wdc.com>
>>>> ---
>>>>  .../bindings/pinctrl/kendryte,k210-fpioa.yaml | 106 ++++++++++++++++++
>>>>  1 file changed, 106 insertions(+)
>>>>  create mode 100644 Documentation/devicetree/bindings/pinctrl/kendryte,k210-fpioa.yaml
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/pinctrl/kendryte,k210-fpioa.yaml b/Documentation/devicetree/bindings/pinctrl/kendryte,k210-fpioa.yaml
>>>> new file mode 100644
>>>> index 000000000000..8730add88ee0
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/pinctrl/kendryte,k210-fpioa.yaml
>>>> @@ -0,0 +1,106 @@
>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>>> +%YAML 1.2
>>>> +---
>>>> +$id: http://devicetree.org/schemas/pinctrl/kendryte,k210-fpioa.yaml#
>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>>> +
>>>> +title: Kendryte K210 FPIOA (Fully Programmable IO Array) Device Tree Bindings
>>>> +
>>>> +maintainers:
>>>> +  - Damien Le Moal <damien.lemoal at wdc.com>
>>>> +
>>>> +description:
>>>> +  The Kendryte K210 SoC Fully Programmable IO Array controller allows assiging
>>>> +  any of 256 possible functions to any of 48 IO pins. Pin function configuration
>>>> +  is performed on a per-pin basis.
>>>> +
>>>> +properties:
>>>> +  compatible:
>>>> +    const: kendryte,k210-fpioa
>>>> +
>>>> +  reg:
>>>> +    description: FPIOA controller register space base address and size
>>>> +
>>>> +  clocks:
>>>> +    minItems: 2
>>>> +    maxItems: 2
>>>
>>> Can drop these. Implied by 'items' length.
>>>
>>>> +    items:
>>>> +      - description: Controller reference clock source
>>>> +      - description: APB interface clock source
>>>> +
>>>> +  clock-names:
>>>> +    minItems: 2
>>>> +    maxItems: 2
>>>> +    items:
>>>> +      - const: ref
>>>> +      - const: pclk
>>>> +
>>>> +  resets:
>>>> +    maxItems: 1
>>>> +
>>>> +  kendryte,sysctl:
>>>> +    minItems: 1
>>>> +    maxItems: 1
>>>> +    $ref: /schemas/types.yaml#/definitions/phandle-array
>>>> +    description: |
>>>> +      phandle to the system controller node
>>>> +
>>>> +  kendryte,power-offset:
>>>> +    minItems: 1
>>>> +    maxItems: 1
>>>> +    $ref: /schemas/types.yaml#/definitions/uint32
>>>> +    description: |
>>>> +      Offset of the power domain control register of the system controller.
>>>
>>> Sounds like you should be using power-domains binding.
>>
>> This is for pin power domains. E.g. pins 0-5 can be set to 1V8 or 3V3 logic levels.
> 
> Okay, please make that clear in the description. You can combine the
> above 2 properties into one which is a phandle+offset.

Could you point me to an example of such property ? I am not sure how to do that
so an example would help. Thanks.

> 
> Rob
> 


-- 
Damien Le Moal
Western Digital Research