[PATCH 30/32] riscv: Add SiPeed MAIXDUINO board device tree
Sean Anderson
seanga2 at gmail.com
Sat Nov 7 09:14:09 EST 2020
On 11/7/20 3:14 AM, Damien Le Moal wrote:
> Add a device tree for the SiPeed MAIXDUINO board. This device tree
> enables LEDs and spi/mmc SD card device. Additionally, gpios and i2c
> are also enabled and mapped to the board header pins as indicated on
> the board itself.
>
> Signed-off-by: Damien Le Moal <damien.lemoal at wdc.com>
> ---
> .../boot/dts/kendryte/k210_maixduino.dts | 203 ++++++++++++++++++
> 1 file changed, 203 insertions(+)
> create mode 100644 arch/riscv/boot/dts/kendryte/k210_maixduino.dts
>
> diff --git a/arch/riscv/boot/dts/kendryte/k210_maixduino.dts b/arch/riscv/boot/dts/kendryte/k210_maixduino.dts
> new file mode 100644
> index 000000000000..78a37cf9df97
> --- /dev/null
> +++ b/arch/riscv/boot/dts/kendryte/k210_maixduino.dts
> @@ -0,0 +1,203 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2019-20 Sean Anderson <seanga2 at gmail.com>
> + * Copyright (C) 2020 Western Digital Corporation or its affiliates.
> + */
> +
> +/dts-v1/;
> +
> +#include "k210.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +
> +/ {
> + model = "SiPeed MAIXDUINO";
> + compatible = "sipeed,maixduino", "kendryte,k210";
> +
> + chosen {
> + bootargs = "earlycon console=ttySIF0";
> + stdout-path = "serial0:115200n8";
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + boot {
> + label = "BOOT";
> + linux,code = <BTN_0>;
> + gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + sound {
> + compatible = "simple-audio-card";
> + simple-audio-card,format = "i2s";
> + status = "disabled";
> +
> + simple-audio-card,cpu {
> + sound-dai = <&i2s0 0>;
> + };
> +
> + simple-audio-card,codec {
> + sound-dai = <&mic>;
> + };
> + };
> +
> + mic: mic {
> + #sound-dai-cells = <0>;
> + compatible = "memsensing,msm261s4030h0";
> + status = "disabled";
> + };
> +};
> +
> +&fpioa {
> + status = "okay";
> +
> + fpioa_uarths: uarths {
> + pinmux = <K210_FPIOA(4, K210_PCF_UARTHS_RX)>, /* Header "0" */
> + <K210_FPIOA(5, K210_PCF_UARTHS_TX)>; /* Header "1" */
> + };
> +
> + fpioa_gpio: gpio {
> + pinmux = <K210_FPIOA(8, K210_PCF_GPIO0)>,
> + <K210_FPIOA(9, K210_PCF_GPIO1)>;
> + };
> +
> + fpioa_gpiohs: gpiohs {
> + pinmux = <K210_FPIOA(16, K210_PCF_GPIOHS0)>, /* BOOT */
> + <K210_FPIOA(17, K210_PCF_GPIOHS1)>,
> + <K210_FPIOA(21, K210_PCF_GPIOHS2)>, /* Header "2" */
> + <K210_FPIOA(22, K210_PCF_GPIOHS3)>, /* Header "3" */
> + <K210_FPIOA(23, K210_PCF_GPIOHS4)>, /* Header "4" */
> + <K210_FPIOA(24, K210_PCF_GPIOHS5)>, /* Header "5" */
> + <K210_FPIOA(32, K210_PCF_GPIOHS6)>, /* Header "6" */
> + <K210_FPIOA(15, K210_PCF_GPIOHS7)>, /* Header "7" */
> + <K210_FPIOA(14, K210_PCF_GPIOHS8)>, /* Header "8" */
> + <K210_FPIOA(13, K210_PCF_GPIOHS9)>, /* Header "9" */
> + <K210_FPIOA(12, K210_PCF_GPIOHS10)>, /* Header "10" */
> + <K210_FPIOA(11, K210_PCF_GPIOHS11)>, /* Header "11" */
> + <K210_FPIOA(10, K210_PCF_GPIOHS12)>, /* Header "12" */
> + <K210_FPIOA(3, K210_PCF_GPIOHS13)>, /* Header "13" */
> + <K210_FPIOA(25, K210_PCF_GPIOHS14)>;
> + };
> +
> + fpioa_i2s0: i2s0 {
> + pinmux = <K210_FPIOA(18, K210_PCF_I2S0_SCLK)>,
> + <K210_FPIOA(19, K210_PCF_I2S0_WS)>,
> + <K210_FPIOA(20, K210_PCF_I2S0_IN_D0)>;
> + };
> +
> + fpioa_spi1: spi1 {
> + pinmux = <K210_FPIOA(26, K210_PCF_SPI1_D1)>,
> + <K210_FPIOA(27, K210_PCF_SPI1_SCLK)>,
> + <K210_FPIOA(28, K210_PCF_SPI1_D0)>,
> + <K210_FPIOA(29, K210_PCF_SPI1_SS0)>; /* cs */
> + };
> +
> + fpioa_i2c1: i2c1 {
> + pinmux = <K210_FPIOA(30, K210_PCF_I2C1_SCLK)>, /* Header "scl" */
> + <K210_FPIOA(31, K210_PCF_I2C1_SDA)>; /* Header "sda" */
> + };
> +
> + fpioa_i2s1: i2s1 {
> + pinmux = <K210_FPIOA(33, K210_PCF_I2S1_WS)>,
> + <K210_FPIOA(34, K210_PCF_I2S1_IN_D0)>,
> + <K210_FPIOA(35, K210_PCF_I2S1_SCLK)>;
> + };
> +
> + fpioa_spi0: spi0 {
> + pinmux = <K210_FPIOA(36, K210_PCF_GPIOHS20)>, /* cs */
> + <K210_FPIOA(37, K210_PCF_GPIOHS21)>, /* rst */
> + <K210_FPIOA(38, K210_PCF_GPIOHS22)>, /* dc */
> + <K210_FPIOA(39, K210_PCF_SPI0_SCLK)>; /* wr */
> + };
> +
> + fpioa_dvp: dvp {
> + pinmux = <K210_FPIOA(40, K210_PCF_SCCB_SDA)>,
> + <K210_FPIOA(41, K210_PCF_SCCB_SCLK)>,
> + <K210_FPIOA(42, K210_PCF_DVP_RST)>,
> + <K210_FPIOA(43, K210_PCF_DVP_VSYNC)>,
> + <K210_FPIOA(44, K210_PCF_DVP_PWDN)>,
> + <K210_FPIOA(45, K210_PCF_DVP_HSYNC)>,
> + <K210_FPIOA(46, K210_PCF_DVP_XCLK)>,
> + <K210_FPIOA(47, K210_PCF_DVP_PCLK)>;
> + };
> +};
> +
> +&uarths0 {
> + pinctrl-0 = <&fpioa_uarths>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&gpio0 {
> + pinctrl-0 = <&fpioa_gpiohs>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&gpio1 {
> + pinctrl-0 = <&fpioa_gpio>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&i2s0 {
> + #sound-dai-cells = <1>;
> + pinctrl-0 = <&fpioa_i2s0>;
> + pinctrl-names = "default";
> +};
> +
> +&i2c1 {
> + pinctrl-0 = <&fpioa_i2c1>;
> + pinctrl-names = "default";
> + clock-frequency = <400000>;
> + status = "okay";
> +};
> +
> +&dvp0 {
> + pinctrl-0 = <&fpioa_dvp>;
> + pinctrl-names = "default";
> +};
> +
> +&spi0 {
> + pinctrl-0 = <&fpioa_spi0>;
> + pinctrl-names = "default";
> + num-cs = <1>;
> + cs-gpios = <&gpio0 20 0>;
> +
> + panel at 0 {
> + compatible = "sitronix,st7789v";
> + reg = <0>;
> + reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
> + dc-gpios = <&gpio0 22 0>;
> + spi-max-frequency = <15000000>;
> + };
> +};
> +
> +&spi1 {
> + pinctrl-0 = <&fpioa_spi1>;
> + pinctrl-names = "default";
> + num-cs = <1>;
> + polling;
> + status = "okay";
> +
> + slot at 0 {
> + compatible = "mmc-spi-slot";
> + reg = <0>;
> + voltage-ranges = <3300 3300>;
> + spi-max-frequency = <4000000>;
> + broken-cd;
> + };
> +};
> +
> +&spi3 {
> + spi-flash at 0 {
> + compatible = "jedec,spi-nor";
> + reg = <0>;
> + spi-max-frequency = <50000000>;
> + m25p,fast-read;
> + broken-flash-reset;
> + };
> +};
>
Reviewed-by: Sean Anderson <seanga2 at gmail.com>
More information about the linux-riscv
mailing list