[PATCH 24/32] dt-bindings: Document kendryte,k210-fpioa bindings

[Sean Anderson]

On 11/7/20 3:14 AM, Damien Le Moal wrote:
> Document the device tree bindings for the Kendryte K210 SoC Fully
> Programmable IO Array (FPIOA) pinctrl driver in
> Documentation/devicetree/bindings/pinctrl/kendryte,k210-fpioa.yaml
> 
> Signed-off-by: Damien Le Moal <damien.lemoal at wdc.com>
> ---
>  .../bindings/pinctrl/kendryte,k210-fpioa.yaml | 106 ++++++++++++++++++
>  1 file changed, 106 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/kendryte,k210-fpioa.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/kendryte,k210-fpioa.yaml b/Documentation/devicetree/bindings/pinctrl/kendryte,k210-fpioa.yaml
> new file mode 100644
> index 000000000000..8730add88ee0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/kendryte,k210-fpioa.yaml
> @@ -0,0 +1,106 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/kendryte,k210-fpioa.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Kendryte K210 FPIOA (Fully Programmable IO Array) Device Tree Bindings
> +
> +maintainers:
> +  - Damien Le Moal <damien.lemoal at wdc.com>
> +
> +description:
> +  The Kendryte K210 SoC Fully Programmable IO Array controller allows assiging
> +  any of 256 possible functions to any of 48 IO pins. Pin function configuration
> +  is performed on a per-pin basis.
> +
> +properties:
> +  compatible:
> +    const: kendryte,k210-fpioa
> +
> +  reg:
> +    description: FPIOA controller register space base address and size
> +
> +  clocks:
> +    minItems: 2
> +    maxItems: 2
> +    items:
> +      - description: Controller reference clock source
> +      - description: APB interface clock source
> +
> +  clock-names:
> +    minItems: 2
> +    maxItems: 2
> +    items:
> +      - const: ref
> +      - const: pclk
> +
> +  resets:
> +    maxItems: 1
> +
> +  kendryte,sysctl:
> +    minItems: 1
> +    maxItems: 1
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description: |
> +      phandle to the system controller node
> +
> +  kendryte,power-offset:
> +    minItems: 1
> +    maxItems: 1
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: |
> +      Offset of the power domain control register of the system controller.
> +      The value should be the macro K210_SYSCTL_POWER_SEL defined in
> +      dt-bindings/mfd/k210-sysctl.h.
> +
> +patternProperties:
> +  '^.*$':
> +    if:
> +      type: object
> +    then:
> +      patternProperties:
> +        "^pinmux$":
> +          $ref: /schemas/pinctrl/pincfg-node.yaml
> +          description:
> +            An array of IO pins alternate functions. The values for each
> +            IO pin is a combination of an IO pin number (0 to 47) with the
> +            desired function for the IO pin. Functions are defined as macros in
> +            dt-bindings/pinctrl/k210-pinctrl.h. The K210_FPIOA(IO pin, function)
> +            is provided to facilitate the combination of IO pin numbers and
> +            functions.
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - resets
> +  - kendryte,sysctl
> +  - kendryte,power-offset
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/pinctrl/k210-pinctrl.h>
> +    #include <dt-bindings/mfd/k210-sysctl.h>
> +    #include <dt-bindings/clock/k210-sysctl.h>
> +    #include <dt-bindings/reset/k210-sysctl.h>
> +
> +    fpioa: pinmux at 502B0000 {
> +      compatible = "kendryte,k210-fpioa";
> +      reg = <0x502B0000 0x100>;
> +      clocks = <&sysclk K210_CLK_FPIOA>;
> +      resets = <&sysrst K210_RST_FPIOA>;
> +      kendryte,sysctl = <&sysctl>;
> +      kendryte,power-offset = <K210_SYSCTL_POWER_SEL>;
> +      pinctrl-0 = <&fpioa_jtag>;
> +      pinctrl-names = "default";
> +
> +      fpioa_jtag: jtag {
> +        pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
> +                 <K210_FPIOA(1, K210_PCF_JTAG_TDI)>,
> +                 <K210_FPIOA(2, K210_PCF_JTAG_TMS)>,
> +                 <K210_FPIOA(3, K210_PCF_JTAG_TDO)>;
> +      };
> +    };
> 

Reviewed-by: Sean Anderson <seanga2 at gmail.com>