[PATCH 15/32] dt-bindings: Define Kendryte K210 sysctl registers

[Sean Anderson]

On 11/7/20 3:14 AM, Damien Le Moal wrote:
> Introduce the dt-bindings file include/dt-bindings/mfd/k210_sysctl.h to
> define the offset of all registers of the K210 system controller.
> 
> Signed-off-by: Damien Le Moal <damien.lemoal at wdc.com>
> ---
>  include/dt-bindings/mfd/k210-sysctl.h | 41 +++++++++++++++++++++++++++
>  1 file changed, 41 insertions(+)
>  create mode 100644 include/dt-bindings/mfd/k210-sysctl.h
> 
> diff --git a/include/dt-bindings/mfd/k210-sysctl.h b/include/dt-bindings/mfd/k210-sysctl.h
> new file mode 100644
> index 000000000000..5cc386d3c9ca
> --- /dev/null
> +++ b/include/dt-bindings/mfd/k210-sysctl.h
> @@ -0,0 +1,41 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Copyright (C) 2020 Sean Anderson <seanga2 at gmail.com>
> + * Copyright (c) 2020 Western Digital Corporation or its affiliates.
> + */
> +#ifndef MFD_K210_SYSCTL_H
> +#define MFD_K210_SYSCTL_H
> +
> +/*
> + * Kendryte K210 SoC system controller registers offsets.
> + * Taken from Kendryte SDK (kendryte-standalone-sdk).
> + */
> +#define K210_SYSCTL_GIT_ID	0x00 /* Git short commit id */
> +#define K210_SYSCTL_UART_BAUD	0x04 /* Default UARTHS baud rate */
> +#define K210_SYSCTL_PLL0	0x08 /* PLL0 controller */
> +#define K210_SYSCTL_PLL1	0x0C /* PLL1 controller */
> +#define K210_SYSCTL_PLL2	0x10 /* PLL2 controller */
> +#define K210_SYSCTL_PLL_LOCK	0x18 /* PLL lock tester */
> +#define K210_SYSCTL_ROM_ERROR	0x1C /* AXI ROM detector */
> +#define K210_SYSCTL_SEL0	0x20 /* Clock select controller 0 */
> +#define K210_SYSCTL_SEL1	0x24 /* Clock select controller 1 */
> +#define K210_SYSCTL_EN_CENT	0x28 /* Central clock enable */
> +#define K210_SYSCTL_EN_PERI	0x2C /* Peripheral clock enable */
> +#define K210_SYSCTL_SOFT_RESET	0x30 /* Soft reset ctrl */
> +#define K210_SYSCTL_PERI_RESET	0x34 /* Peripheral reset controller */
> +#define K210_SYSCTL_THR0	0x38 /* Clock threshold controller 0 */
> +#define K210_SYSCTL_THR1	0x3C /* Clock threshold controller 1 */
> +#define K210_SYSCTL_THR2	0x40 /* Clock threshold controller 2 */
> +#define K210_SYSCTL_THR3	0x44 /* Clock threshold controller 3 */
> +#define K210_SYSCTL_THR4	0x48 /* Clock threshold controller 4 */
> +#define K210_SYSCTL_THR5	0x4C /* Clock threshold controller 5 */
> +#define K210_SYSCTL_THR6	0x50 /* Clock threshold controller 6 */
> +#define K210_SYSCTL_MISC	0x54 /* Miscellaneous controller */
> +#define K210_SYSCTL_PERI	0x58 /* Peripheral controller */
> +#define K210_SYSCTL_SPI_SLEEP	0x5C /* SPI sleep controller */
> +#define K210_SYSCTL_RESET_STAT	0x60 /* Reset source status */
> +#define K210_SYSCTL_DMA_SEL0	0x64 /* DMA handshake selector 0 */
> +#define K210_SYSCTL_DMA_SEL1	0x68 /* DMA handshake selector 1 */
> +#define K210_SYSCTL_POWER_SEL	0x6C /* IO Power Mode Select controller */
> +
> +#endif /* MFD_K210_SYSCTL_H */
> 

Reviewed-by: Sean Anderson <seanga2 at gmail.com>