[PATCH 17/32] dt-bindings: Define Kendryte K210 reset signals

[Damien Le Moal]

Introduce the dt-bindings file include/dt-bindings/reset/k210_sysctl.h
to define IDs for all 30 reset signals available on the Kendryte K210
RISC-V SoC.

Signed-off-by: Damien Le Moal <damien.lemoal at wdc.com>
---
 include/dt-bindings/reset/k210-rst.h | 42 ++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)
 create mode 100644 include/dt-bindings/reset/k210-rst.h

diff --git a/include/dt-bindings/reset/k210-rst.h b/include/dt-bindings/reset/k210-rst.h
new file mode 100644
index 000000000000..883c1aed50e8
--- /dev/null
+++ b/include/dt-bindings/reset/k210-rst.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2019 Sean Anderson <seanga2 at gmail.com>
+ * Copyright (c) 2020 Western Digital Corporation or its affiliates.
+ */
+#ifndef RESET_K210_SYSCTL_H
+#define RESET_K210_SYSCTL_H
+
+/*
+ * Kendryte K210 SoC system controller K210_SYSCTL_SOFT_RESET register bits.
+ * Taken from Kendryte SDK (kendryte-standalone-sdk).
+ */
+#define K210_RST_ROM	0
+#define K210_RST_DMA	1
+#define K210_RST_AI	2
+#define K210_RST_DVP	3
+#define K210_RST_FFT	4
+#define K210_RST_GPIO	5
+#define K210_RST_SPI0	6
+#define K210_RST_SPI1	7
+#define K210_RST_SPI2	8
+#define K210_RST_SPI3	9
+#define K210_RST_I2S0	10
+#define K210_RST_I2S1	11
+#define K210_RST_I2S2	12
+#define K210_RST_I2C0	13
+#define K210_RST_I2C1	14
+#define K210_RST_I2C2	15
+#define K210_RST_UART1	16
+#define K210_RST_UART2	17
+#define K210_RST_UART3	18
+#define K210_RST_AES	19
+#define K210_RST_FPIOA	20
+#define K210_RST_TIMER0	21
+#define K210_RST_TIMER1	22
+#define K210_RST_TIMER2	23
+#define K210_RST_WDT0	24
+#define K210_RST_WDT1	25
+#define K210_RST_SHA	26
+#define K210_RST_RTC	29
+
+#endif /* RESET_K210_SYSCTL_H */
-- 
2.28.0