[PATCH 2/4] clk: sifive: Use common name for prci configuration

[Stephen Boyd]

Quoting Zong Li (2020-10-16 02:18:24)
> Use generic name CLK_SIFIVE_PRCI instead of CLK_SIFIVE_FU540_PRCI. This
> patch is prepared for fu740 support.
> 
> Signed-off-by: Zong Li <zong.li at sifive.com>
> ---

Looks ok but needs an ack from riscv maintainers to go through clk
tree. I was worried it would break defconfigs but it seems that the arch
selects the config so this should be OK, right?

>  arch/riscv/Kconfig.socs     | 2 +-
>  drivers/clk/sifive/Kconfig  | 6 +++---
>  drivers/clk/sifive/Makefile | 2 +-
>  3 files changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
> index 8a55f6156661..3284d5c291be 100644
> --- a/arch/riscv/Kconfig.socs
> +++ b/arch/riscv/Kconfig.socs
> @@ -5,7 +5,7 @@ config SOC_SIFIVE
>         select SERIAL_SIFIVE if TTY
>         select SERIAL_SIFIVE_CONSOLE if TTY
>         select CLK_SIFIVE
> -       select CLK_SIFIVE_FU540_PRCI
> +       select CLK_SIFIVE_PRCI
>         select SIFIVE_PLIC
>         help
>           This enables support for SiFive SoC platform hardware.