[PATCH 25/36] tty: serial: sifive: Struct headers should start with 'struct <name>'

[Lee Jones]

Also supply a missing member description.

Fixes the following W=1 kernel build warning(s):

 drivers/tty/serial/sifive.c:157: warning: cannot understand function prototype: 'struct sifive_serial_port '

Cc: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
Cc: Jiri Slaby <jirislaby at kernel.org>
Cc: Palmer Dabbelt <palmer at dabbelt.com>
Cc: Paul Walmsley <paul.walmsley at sifive.com>
Cc: linux-serial at vger.kernel.org
Cc: linux-riscv at lists.infradead.org
Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
 drivers/tty/serial/sifive.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c
index 13eadcb8aec4e..1066eebe3b28b 100644
--- a/drivers/tty/serial/sifive.c
+++ b/drivers/tty/serial/sifive.c
@@ -144,12 +144,13 @@
  */
 
 /**
- * sifive_serial_port - driver-specific data extension to struct uart_port
+ * struct sifive_serial_port - driver-specific data extension to struct uart_port
  * @port: struct uart_port embedded in this struct
  * @dev: struct device *
  * @ier: shadowed copy of the interrupt enable register
  * @clkin_rate: input clock to the UART IP block.
  * @baud_rate: UART serial line rate (e.g., 115200 baud)
+ * @clk: reference to this device's clock
  * @clk_notifier: clock rate change notifier for upstream clock changes
  *
  * Configuration data specific to this SiFive UART.
-- 
2.25.1