[RFT PATCH v4 0/9] Add UEFI support for RISC-V

[Atish Patra]

This series adds UEFI support for RISC-V.

Linux kernel: 5.8-rc7 + 1 exception vector setup patch (queued for for-next) 
U-Boot: v2020.07 
OpenSBI: master

This series depends on early setup of exeception vector patch
http://lists.infradead.org/pipermail/linux-riscv/2020-July/001207.html

Patch 1-3 are generic riscv feature addition required for UEFI support.
Patch 4-7 adds the efi stub support for RISC-V which was reviewed few months back.
https://www.spinics.net/lists/linux-efi/msg19144.html
Patch 8 just renames arm-init code so that it can be used across different
architectures. Patch 11 adds the runtime services for RISC-V.

The working set of patches can also be found in following git repo.
https://github.com/atishp04/linux/tree/uefi_riscv_5.9_v4

The patches have been verified on Qemu/HiFive unleashed using bootefi command in
U-Boot for both RV32 and RV64.

For RV32, maximum allocated memory should be 1G as RISC-V kernel can not map
beyond 1G of physical memory for RV32.

Runtime services have been verified with fwts. Here is the snippet of the result.

***********************************************************************
This test run on 16/07/20 at 17:54:53 on host Linux fedora-riscv
5.8.0-rc5-00015-g5e61441080fd-dirty #938 SMP Thu Jul 16 14:50:11 PDT 2020
riscv64.

Command: "fwts uefirtvariable".
Running tests: uefirtvariable.

uefirtvariable: UEFI Runtime service variable interface tests.
Test 1 of 9: Test UEFI RT service get variable interface.
SKIPPED: Test 1, Skipping test, SetVariable runtime service is not supported on
this platform.

Test 2 of 9: Test UEFI RT service get next variable name interface.
The runtime service GetNextVariableName interface function test.
SKIPPED: Test 2, Skipping test, SetVariable runtime service is not supported on
this platform.

...

Test 4 of 9: Test UEFI RT service query variable info interface.
SKIPPED: Test 4, Not support the QueryVariableInfo UEFI runtime interface:
cannot test.

ADVICE: Firmware also needs to check if the revision of system table is correct
or not. Linux kernel returns EFI_UNSUPPORTED as well, if the FirmwareRevision of
system table is less than EFI_2_00_SYSTEM_TABLE_REVISION.

...
***********************************************************************

Currently, U-Boot EFI implementation returns EFI_UNSUPPORTED for set_variable
service. That's why all tests have been skipped but I manually verified that the
value is returned from U-Boot not kernel :).

EDK2 can boot quite far into Linux with the current series. However, it crashes
before userspace because of a possible memory corruption by EDK2.

Changes from v3->v4:
1. Used pgd mapping to avoid copying DT to bss.

Changes from v2->v3:
1. Fixed few bugs in run time services page table mapping.
2. Dropped patch 1 as it is already taken into efi-tree.
3. Sent few generic mmu fixes as a separate series to ease the merge conflicts.

Changes from v1->v2:
1. Removed patch 1 as it is already taken into efi-tree.
2. Fixed compilation issues with patch 9.
3. Moved few function prototype declaration to header file to keep kbuild happy.

Changes from previous version:
1. Added full ioremap support.
2. Added efi runtime services support.
3. Fixes mm issues

Anup Patel (1):
RISC-V: Move DT mapping outof fixmap

Atish Patra (8):
RISC-V: Add early ioremap support
RISC-V: Implement late mapping page table allocation functions
include: pe.h: Add RISC-V related PE definition
RISC-V: Add PE/COFF header for EFI stub
RISC-V: Add EFI stub support.
efi: Rename arm-init to efi-init common for all arch
RISC-V: Add EFI runtime services
RISC-V: Add page table dump support for uefi

arch/riscv/Kconfig                            |  25 +++
arch/riscv/Makefile                           |   1 +
arch/riscv/configs/defconfig                  |   1 +
arch/riscv/include/asm/Kbuild                 |   1 +
arch/riscv/include/asm/efi.h                  |  56 +++++++
arch/riscv/include/asm/fixmap.h               |  16 +-
arch/riscv/include/asm/io.h                   |   1 +
arch/riscv/include/asm/mmu.h                  |   2 +
arch/riscv/include/asm/pgtable.h              |   5 +
arch/riscv/include/asm/sections.h             |  13 ++
arch/riscv/kernel/Makefile                    |   5 +
arch/riscv/kernel/efi-header.S                | 104 +++++++++++++
arch/riscv/kernel/efi.c                       | 105 +++++++++++++
arch/riscv/kernel/head.S                      |  17 ++-
arch/riscv/kernel/head.h                      |   2 -
arch/riscv/kernel/image-vars.h                |  51 +++++++
arch/riscv/kernel/setup.c                     |  17 ++-
arch/riscv/kernel/vmlinux.lds.S               |  22 ++-
arch/riscv/mm/init.c                          |  90 ++++++++---
arch/riscv/mm/ptdump.c                        |  48 +++++-
drivers/firmware/efi/Kconfig                  |   3 +-
drivers/firmware/efi/Makefile                 |   4 +-
.../firmware/efi/{arm-init.c => efi-init.c}   |   0
drivers/firmware/efi/libstub/Makefile         |  10 ++
drivers/firmware/efi/libstub/efi-stub.c       |  11 +-
drivers/firmware/efi/libstub/riscv-stub.c     | 110 ++++++++++++++
drivers/firmware/efi/riscv-runtime.c          | 143 ++++++++++++++++++
include/linux/pe.h                            |   3 +
28 files changed, 825 insertions(+), 41 deletions(-)
create mode 100644 arch/riscv/include/asm/efi.h
create mode 100644 arch/riscv/include/asm/sections.h
create mode 100644 arch/riscv/kernel/efi-header.S
create mode 100644 arch/riscv/kernel/efi.c
create mode 100644 arch/riscv/kernel/image-vars.h
rename drivers/firmware/efi/{arm-init.c => efi-init.c} (100%)
create mode 100644 drivers/firmware/efi/libstub/riscv-stub.c
create mode 100644 drivers/firmware/efi/riscv-runtime.c

--
2.24.0